• Korean Journal of Remote Sensing
• /
• v.14 no.3
• /
• pp.250-261
• /
• 1998

The purpose of this paper is to extract fast DEM (Digital Elevation Model) using satellite images. DEM extraction consists of three parts. First part is the modeling of satellite position and attitude, second part is the matching of two images to find corresponding points of them and third part is to calculate the elevation of each point by using the results of the first and second part. The position and attitude modeling of satellite is processed by using GCPs. A area based matching method is used to find corresponding points between the stereo satellite images. The elevation of each point is calculated using the exterior orientation parameters obtained from modeling and conjugate points from matching. In the DEM generation system, matching procedure holds most of a processing time, therefore to reduce the time for matching, a new fast matching algorithm using gradient correlation and fast similarity measure calculation method is proposed. In this paper, the SPOT satellite images, level 1A 6000$\times$6000 panchromatic images are used to extract DEM. The experiment result shows the possibility of fast DEM extraction with the satellite images.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.4
• /
• pp.187-196
• /
• 1998

Morphological changes around the groin system in the beach are examined using a numerical model. The model consists of two parts : the hydrodynamic model which calculates the transformation of waves and currents, and the sediment transport model which determines sediment transport rates and bottom topographic changes. The numerical model is applied to single-groin and three-groin systems on a typical plane beach. The changes to the beach system due to waves and currents during 150-day simulation near the groins are calculated using sediment transport rate patterns in the domain. The sand by-passing rate patterns around groins are also evaluated.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.2
• /
• pp.53-61
• /
• 1989

In this paper the quantitative classification parameters of terrain which can be practicable to the interpolation of digital terrain model forming a regular grid pattern have been suggested and objective terrain classification have been established by making a cluster analysis using these parameters. Also, interpolation suitable to the classification of terrain has been used by making a descriminant alaysis from description parameters of terrains. The terrain classification in this paper was dependent upon two parameters of the ratio horizontal area to inclined area and the magnitude of harmonic vectors. And the studying area was seperated to three groups of terrains by these two parameters. Three groups of terrains could be classified into the discriminant functions. By determining the ratio of area and harmonic vector magnitude in any terrains using the above discriminant function, it was possible to discriminate the terrains to apply the interpolation practicable to the terrain characteristics.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.16-17
• /
• 2008

최근 3차원 도시 모델의 활용이 증가하고 있다. 본 논문에서는 단일 고해상도 위성영상으로부터 3차원 도시 모델을 생성하는 연구를 수행하였다. 3차원 도심 모델은 크게 인공지물 정보와 지형정보가 필요하다. 본 연구에서 인공지물 정보는 단일 고해상도 위성영상으로부터 건물의 그림자를 이용한 방법으로 추출하였으며, 지형정보는 기존에 구축된 수치지도로부터 수치표고자료를 생성하여 적용하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.441-448
• /
• 2011

Lately, digital restitution was became common using digital aerial photos. Therefore, we can obtain three-dimensional data. As a plotting-maker is checked by naked eye, plotting original data is very useful for making reliable three-dimensional data including contour and elevation point layers. In this study, we want to make precise and accurate digital elevation model using plotting original data. Contour and elevation point layers was extracted in digital map and break line was extracted in plotting original data. And then, compared both of results. For comparison, we selected slight slope and complex topography area like a residence area, mountain and agricultural land. We extracted break line deleting layer until obtaining ideal digital elevation model. As the results, We could extract contour, elevation points, eight road and two boundary layers using break lines. And We could obtain precise elevation model. Editing break lines, the distortion of digital elevation model could be minimized in the complex and sharp slope area.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.130-134
• /
• 2007

본 연구는 지형참조항법(TRN; Terrain Referenced Navigation)에 근거하는 헬리콥터 항법 시스템을 위한 기본 알고리즘을 개발하기 위해 수행되었다. 현재 본 연구에 위성항법장치(GPS; Global Positioning System)로부터의 정보(X, Y, Z 좌표)는 비행체가 항로를 비행하는 중 매 92.8m의 수평거리로 환산하여 수신되는 것으로 가정하였다. 비행체는 3차원 직교 좌표 체계(Cartesian coordinate system)로 표현되는 수치지형모델 (DTM; Digital Terrain Model)상에서 시점(Origination)-종점(Destination) 기법에 의해 항로를 결정한다. 본 시스템은 우선 조종사에게 지형의 사전 인식을 위해 시점-종점 주변 3차원 지형도와 항로의 종단면도를 보여준다. 본 시스템은 직접적인 지상 충돌을 피하기 위해 지형 여유 층면(terrain clearance floor)의 개념을 도입, 기복 지형 표면에 일정 높이의 완충 공간을 설정한다. 만약 비행체가 항행 중 완충 공간에 접근하게 되면 본 시스템은 즉시 경고음과 메시지를 발한다(Matlab 메뉴를 사용하였음). 물론 헬리콥터의 이착륙 시에는 불필요한 경고를 발생시키지 않기 위해 완충 공간 조정은 가능하다. 수치지형모델은 (주)첨성대가 확보하고 있는 3초 간격의 DTM을 채택, 작성하였다.

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.495-513
• /
• 2004

The shape of land surface work as a cradle for various environmental processes and human activities. As spatially distributed process modelings become increasing important in current research communities, a classification system that delineates land surface into characteristic geomorphological units is a pre-requisite for sustainable land use planning and management. Existing classification systems are either morphometric or generic, which have limitations to characterize continuous ecological processes over the landscape. A new classification system was developed to delineate the land surface into different geomorphological units from Digital Elevation Models(DEMs). This model assumes that there are pedo-geomorphological units in which distinct sets of hydrological, pedological, and consequent ecological processes occur. The classification system first divides the whole landsurface into eight soil-landscape units. Possible energy and material nows over the land surface were interpreted using a continuity equation of mass flow along the hillslope, and subsequently implemented in terrain analysis procedures. The developed models were tested at a 12$\textrm{km}^2$ area in Yangpyeong-gun, Kyeongi-do, Korea. The method proposed effectively delineates land surface into distinct pedo-geomorphological units, which identify the geomorphological characteristics over a large area at a low cost. The delineated landscape units mal provide a basic information for natural resource survey and environmental modeling practices.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.77-85
• /
• 1997

Researches in the field of Computer Graphics and Geographical Information Systems(GIS) have extensively studied the method of photo-realistic landscape modelling, because it have become a commom requirement in applications such as flight simulators, mission rehearsal, and construction planning. A common approach to the display of terrain uses a Digital Elevation Model(DEM). DEM is an evenly spaced array of the terrain elevation data and can be obtained from stereo satellite data. With the DEM data, the process of 3D terrain modelling consists of three steps. The first step is to extract the meaningful data (such as peak, pit, passes...) from DEM data based on LOD(Level Of Detail) criteria. The second is to construct the 3D surface by TIN, which represents a surface as a set of non-overlapping continuous triangular facets of irregular size and shape. The third is a rendering of 3D terrain model. The goal of this research is a construction of 3D terrain with TIN. To do this, we are going to app]y Radial Sweep Algorithm. Radial Sweep Algorithm for generating TIN works quickly and efficiently. However, it does not solve the problem caused by the approximated nature of triangulated surface. To solve this problem, this research derive improved radial sweep algorithms with the optimal triangle definition.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.63-69
• /
• 2005

Interferometric Synthetic Aperture Radar(InSAR) is a rapidly evolving technique. Spectacular results obtained in various fields such as the monitoring of earthquakes, volcanoes, land subsidence and glacier dynamics, as well as in the construction of Digital Elevation Models(DEMs) of the Earth's surface and the classification of different land types have demonstrated its strength. As InSAR is a remote sensing technique, it has various sources of errors due to the satellite positions and attitude, atmosphere, and others. Therefore, it is important to validate its accuracy, especially for the DEM derived from Satellite SAR images. In this study, Real Time Kinematic(RTK) GPS and Kinematic GPS positioning were chosen as tools for the validation of InSAR derived DEM. The results showed that Kinematic GPS positioning had greater coverage of test area in terms of the number of measurements than RTK GPS. But tracking the satellites near and/or under trees md transmitting data between reference and rover receivers are still pending tasks in GPS techniques.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.295-298
• /
• 2006

본격적인 지표 피복 분류 수행 전 국내 지형 특성에 부합하는 분석을 위해 위성영상 전처리 과정으로 지형보정 수행이 필요하다. 수치지형도로부터 추출된 수치고도모델과 고분광영상을 이용하여 충청남도 홍성군에 위치한 암반 사면에서의 지형보정을 cosine 보정법, Minnaert 보정법, c 보정법을 이용하여 수행하였다. 세 방법을 사용하여 화강암 단일 암종으로 이루어진 클래스의 화소값 표준편차를 비교 분석한 결과 cosine 보정법, c 보정법보다 Minnaert 보정법을 이용한 방법에서 향상된 결과가 도출되었다.