• Spatial Information Research
• /
• v.22 no.4
• /
• pp.59-65
• /
• 2014

Recently, increasing demand for 'Digital Elevation Model(DEM)' to climate change research and various development by global warming in the Arctic region. So we need to verify the accuracy to utilize DEM. In this research, we verified 'ASTER GDEM' and 'GIMP DEM' in several DEM which constructed in the Greenland that most of the area is covered ice sheet. We divided greenland into two part, ice sheet area and non ice sheet area by using the ESA globcover. Then, comparing a difference between 'ASTER DEM', 'GIMP DEM' and ICESat elevation data to verify the accuracy. As a result, GIMP DEM has higher accuracy in ice sheet area and ASTER GDEM has higher accuracy in non-ice sheet area.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.63-78
• /
• 2009

This paper presents the development of dynamically combined Typhoon generated surge-tide-wave numerical model which is applicable to shallow water. The newly developed model is based on both POM (Princeton Ocean Model) for the surge and tide and WAM (WAve Model) for wind-generated waves, but is modified to be applicable to shallow water. In this paper which is the first paper of the two in a sequence, we verified the accuracy and numerical stability of the hydrodynamic part of the model which is responsible for the simulation of Typhoon generated surge and tide. In order to improve the accuracy and numerical stability of the combined model, we modified algorithms responsible for turbulent modeling as well as vertical velocity computation routine of POM. Verification of the model performance had been conducted by comparing numerical simulation results with analytic solutions as well as data obtained from field measurement. The modified POM is shown to be more accurate and numerically stable compare to the existing POM.

• Journal of Radiation Protection and Research
• /
• v.27 no.1
• /
• pp.67-75
• /
• 2002

The groundwater flow and contaminant transport numerical models have been established for understanding the movement of pollutants in surface soil environment. The numerical solutions were compared with the analytic solutions for the verification and the application of the models. The numerical solutions from the groundwater and transport models agreed welt with analytic solutions. Especially, the results of groundwater flow model were validated in one- and two-dimensional heterogeneous media. Therefore, it will represent well the characteristics of the heterogeneous media in the field applications. Also, the phenomena of the pollutant dispersion represented quite well by the advection and the hydrodynamic dispersion in the results of the transport model. The important input factor is the choice of complicated boundary conditions in operating the numerical models. The numerical results are influenced by the choice of the proper boundary conditions.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.2
• /
• pp.33-43
• /
• 2010

Geothermal energy is gaining wide attention as a highly efficient renewable energy and being increasingly used for heating/cooling systems of buildings. The standing column well (SCW) is especially efficient, cost-effective, and suitable for Korean geological and hydrological conditions. However, a numerical model that simulates the SCW has not yet been developed and applied in Korea. This paper describes the development of the SCW numerical model using a finite-volume analysis program. The model, through hydro-thermal coupled analyses, simulates heat transfer through advection, convection, and conduction. The accuracy of the model was verified through comparisons with field data measured at SCWs in the U.S. and Korea. Comparisons indicated that the SCW numerical model can closely predict the performance of a SCW. The numerical model was used to perform a comprehensive parametric study in the companion paper.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.6
• /
• pp.39-44
• /
• 2017

The behavior of the lateral resistance beyond the yield condition on single pile has been evaluated by comparative analysis. Pushover analysis of single pile has been performed to compare to the results on lateral load test of the pile foundation. The study for the behavior beyond the yield condition on single pile had been performed on the results on the lateral load test and pushover analysis considering mechanical conditions of the ground soil and the pile foundation.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.99.1-99.1
• /
• 2012

Hapke의 양방향 분포 함수를 균일하게 입힌 실 크기 3차원 달표면 BRDF 모델을 이용한 달의 조도 수치모사 와 Big Bear Solar Observatory(BBSO)의 달빛 조도 관측 결과를 비교하였다. 1999년 9월 5일 UT9:30에서 UT12:30까지 지구상의 $34^{\circ}$ 15'30.04"N $116^{\circ}$ 55'16.49"W 위치에서 계산된 달의 조도가 관측된 조도와 1% 이내의 차이를 보이는 것을 확인하였다. 이후 검증된 달의 BRDF 모델과 램버시안 산란 지구 모델을 이용해 시간별 전 지구 알베도 추이를 광선 추적 수치 모사한 결과와 실제 BBSO에서의 측정결과 간 1% 이내의 차이를 보이는 것을 확인하여, .BRDF 모델과 광선추적 수치모사 기법의 타당성을 검증하였다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2002.03b
• /
• pp.49-59
• /
• 2002

이 연구에서는 강원도 삼척시를 대상으로 산불취약지역 분석모델을 개발하고, 개발된 분석모델을 기반으로 산불취약지역을 표출하였으며, 이를 위한 전산프로그램을 개발하였다. 산불취약지역 공간분석자료로는 NGIS 사업을 통해 구축된 1/25천 축척의 수치지형도, 수치임상도 그리고 과거 산불발화위치자료를 사용하였다. 산불발화위치에 대한 공간적 분포특성(지형, 임상, 접근성)을 기반으로 모델을 설정하였으며, 공간분석은 간단하면서도 일반인들이 이해하기 쉬운 Conditional probability, Likelihood ratio 방법을 사용하였다. 그리고 각각의 모델에 대한 검증(cross validation)을 실시하였다. 모델 검증방법으로는 과거 산불발화위치자료를 발생시기에 따라 두 개의 그룹으로 나누어 하나는 예측을 위한 자료로 사용하고, 다른 하나는 검증을 위한 자료로 사용하였다. 모델별 예측성능은 prediction rate curve를 비교·분석하여 판단하였다. 삼척시를 대상으로 한 예측성능에서 Likelihood ratio 모델이 Conditional probability 모델보다 더 낳은 결과를 보였다. 산불취약지역 분석기술로 작성된 상세 산불취약지역지도와 현재 산림청에서 예보하고 있는 전국단위의 산불발생위험지수와 함께 상호보완적으로 사용한다면 산불취약지역에 대한 산불감시인력 및 감시시설의 효율적인 배치를 통하여 일선 시군 또는 읍면 산불예방업무의 효율성이 한층 더 증대될 것으로 기대된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.723-728
• /
• 2014

Hydraulic experiments are performed in order to verify the swash effect of seashore structures installed to prevent scouring. However, a great deal of investment and time are required for producing the test apparatus and seashore structure used to perform the hydraulic experiment. The swash effect can be predicted, however, by using a numerical model and validation can be done based on comparisons of the numerical model and hydraulic experiment analysis results, thereby saving the cost and time required for producing the test apparatus and seashore structure. Taking a polyhedral rubble mound structure as the subject, this study performed a comparative analysis of wave run-up and run-down height of the numerical model interpretative results and the hydraulic experiment results, and validated the interpretative simulation wave test modeling technique. The study also predicted the swash effect by using the numerical interpretation approach method, whereby the volume ratio and friction area of the rubble mound were varied for different results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.79-90
• /
• 2009

This paper presents the development of dynamically combined Typhoon generated surge-tide-wave numerical model which is applicable from deep to shallow water. The dynamically coupled model consists of hydrodynamic module and wind wave module. The hydrodynamic module is modified from POM and wind wave module is modified from WAM to be applicable from deep to shallow water. Hydrodynamic module computes tidal currents, sea surface elevations and storm surges and provide these information to wind wave module. Wind wave mudule computes wind waves and provides computed information such as radiation stress, sea surface roughness and shear stress due to winds. The newly developed model was applied to compute the surge, tide and wave fields by typhoon Maemi. Verification of model performance was made by comparison of measured waves and tide data with simulated results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.9-9
• /
• 1998

가스터빈 연소기의 난류유동장을 구성하는 기본적인 유동형태는 크게 밀폐관내의 돌연 확대를 가지는 동축제트, 선회유동, 그리고 연소공기공 및 회석공기공을 통해 연소실에 수직방향으로 유입되는 제트유동 등으로 분류할 수 있다. 실제 가스터빈 연소기내의 난류유동장을 수치해석하기 위해서는 임의의 형상을 갖는 3차원 유동장을 모사할 수 있는 수치해석법과 고차정확도를 유지하면서도 수렴안정성을 만족시키는 대류항 처리기법 등과 같은 수치모델의 개발이 선행되어야 하며, 이와 함께 복잡한 난류연소유동장을 정확히 묘사할 수 있는 난류모델 및 난류연소모델의 개발 및 검증이 가장 중요한 요인이 된다. 또한 가스터빈 연소기의 최적 설계는 넓은 작동구간에서 높은 효율, NOx 및 CO 배기량의 저감, 희박연소 가연한계의 확장, 연소계통에서의 낮은 압력강하, 낮은 연소벽면온도와 온도구배를 유지시키기 위한 공기에 의한 충분한 냉각 같은 서로 상충되는 설계조건을 만족해야 한다. 그리고, 이러한 상충된 연소설계조건들을 충족시키는 최적 연소기의 설계를 위해서는 실험적인 연구뿐만 아니라 연소기내의 물리적인 현상을 잘 반영할 수 있는 물리적 모델을 바탕으로 한 연소유동의 해석적인 연구를 필요로 한다. 본 연구에서는 원통형 가스터빈 연소기의 등온 및 연소유동장, 그리고 연소기와 연결되는 Scroll 내부의 난류유동장에 대한 수치해석을 수행하여 수치 및 물리모델의 예측능력을 검증하였고, 가스터빈 연소유동장 해석에 관련된 중요 논점들에 대하여 심도있게 분석하였다.