• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.395-408
• /
• 1987

Turbulent flows in an axisymmetric reciprocating engine are numerically simulated at it's suction and compression stage. Amounts of heat transfer through the wall of the cylinder are also estimated. k-.epsilon. turbulence model is adopted and the law of the wall is applied at grid-points near the wall. More than 40 * 40 grids are reguried to reasonably predict flows and the 3-level finite difference scheme for the time derivative term appears to be effective rather than the 2-level scheme. Calculated mean velocity distributions shows good agreements with an available experimental data. The program reasonably simulates flow patterns and pressures throughout the suction and the compression stages of the reciprocating engine. Predicted intensities of turbulence are still deviated from measured data. Further researches for turbulence modeling are expected.

• Spatial Information Research
• /
• v.7 no.1
• /
• pp.1-12
• /
• 1999

The DTM(Digital Terrain Model) in GIS(Geographical Information System) shows the elevation from interpolation using data points surveyed. In panoramic flat landform, pixel size, resolution of source data may not be the problem in using DTM However, in mountainous landform like Korea, appropriate resolution accuracy of source data are important factors to represent the topography concerned. In this study, the difference in contour interval of source data, the resolution after interpolation, and different data structures were compared to figure out the accuracy of slope calculation using DTM from the topographic maps of Togyusan National Park Two types of GIS softwares, Idrisi(grid) ver. 2.0 using the altitude matrices and ArcView(TIN) ver. 3.0a using TIN were used for this purpose. After the analysis the conclusions are as follows: 1) The coarser resolution, the more smoothing effect inrepresenting the topography. 2) The coarser resolution the more difference between the grid-based Idrisi and the TIN-based ArcView. 3) Based on the comparison analysis of error for 30 points from clustering, there is not much difference among 10, 20, 30 m resolution in TIM-based Airview ranging from 4.9 to 6.2n However, the coarser resolution the more error for elevation and slope in the grid-based Idrisi. ranging from 6.3 to 10.9m. 4) Both Idrisi and ArcView could net consider breaklines of lanform like hilltops, valley bottoms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.368-377
• /
• 2021

Plum is a typical fruit that is consumed processed rather than raw. In this study, we manufactured one of the processed foods, viz., plum Jangachi. In this process, the manpower-dependent seed separation and flesh cutting operations were automated by mechanizing, thereby altering the manufacturing process. Quality and Safety were assessed through microbial evaluation, analysis of color, and detection of preservatives in the plum Jangachi. Preference factors were identified through sensual evaluation. When compared with other plum Jangachi currently available in the market, our product was determined to contain 2.7±0.1 Log CFU/g total aerobic bacteria, which is slightly higher than the average of other products. This was not surprising, as the figures are due to the inherent characteristics, which were determined to be lower as compared to other commercial plum Jangachi. Other coliforms, tar dyes, and preservatives were undetected, thereby conferring satisfactory Quality and Safety. In general, there was no statistical difference in the sensual evaluation and appearance; overall, our product received better feedbacks than products on the market. Taken together, our results provide a foundation for applying the mechanization of plum-processed foods, thereby promoting the local economy in the main production area, and overall characteristics obtained are regarded sufficient in terms of market competitiveness.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.921-926
• /
• 2022

Sugar solutions (5%, 10%, 15% and 20%) were tested by seven sensors of Astree E-Tongue for selecting a sensor for sweetness. NMS sensor was chosen as a sensor for sweetness among two sensors (PKS and NMS sensors selected in first stage) by considering precision, linearity and accuracy. Sugar, fructose, glucose and xylitol (5%, 10% and 15%) were tested by E-tongue. The principal component analysis (PCA) result by E-Tongue with seven sensors at 5% concentration level of four sweetners was not satisfactory (Discrimination index was -0.1). On the other hand, the relative NMS sensor response values were derived as 1.08 (fructose), 0.99 (glucose) and 1.00 (xylitol) comparing to sugar. Only the E-Tongue relative glucose response 0.99 was different from 0.5~0.75 of the relative sweetness range reported as the human sensory test results. Considering the excellent precision (%RSD, 1.53~3.64%) of E-Tongue using NMS single sensor for three types of sweeteners compared to sugar in the concentration range of 5% to 15%, replacing sensory test of sweetened beverages by E-Tongue might be possible for new product development and quality control.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.43-49
• /
• 2019

Purpose : We apply the Layered Rescanning PBS designed to complement the Pencil Beam Scanning(PBS), which is vulnerable to moving organs with the Moving Phantom, and compare the homogeneity with the single scan PBS. Methods and materials: Matrix X (IBA, Belgium) and Moving Phantom (standard imaging, USA) were used. A dose of 200 cGy was measured in the AP direction on a hypothetical tumor $10{\times}10{\times}5cm$. The plan type was planned as 4 kinds of sinlge scan PBS, rescan number 4, 8, 12 times. Were measured three times for each types. During the measurement, the respiratory cycle of the Moving Phantom was generally set to 4 seconds per cycle, and the movement radius in the S-I direction was set to 2 cm. In addition, beam on time was measured. Results : The mean values of $D_{max}$ in the PTV were $246.47{\pm}18.8cGy$, $223.43{\pm}8.92cGy$, and $222.47{\pm}7.7cGy$, $213.9{\pm}6.11cGy$ and the mean values of $D_{min}$ were $165.53{\pm}4.32cGy$, $173.13{\pm}11.94cGy$, $184.13{\pm}8.04cGy$, $182.67{\pm}4.38cGy$ and the mean values of $D_{mean}$ $192.77{\pm}6.98cGy$, $196.7{\pm}4.01cGy$, $198.17{\pm}4.96cGy$, $195.77{\pm}3.15cGy$ respectively. As the number of rescanning increased, the Homogeneity Index converged to 1. The beam on time was measured as 2:15, 3:15, 4:30, 5:37 on average. In the measurement process, in the low dose layer of the MU, the problem was found that it was not rescanned as many times as the set number of rescan. Conclusions : In the treatment of tumors with long-term movements, the application of layered rescanning PBS showed a more uniform dose distribution than single scan PBS. And as the number of rescan increase, the distribution of homogeneity is uniform. Compared with single scan plan and 12 rescan plan, HI value was improved by 0.32. Further studies are expected to be applicable to patients who can not be treated with respiratory synchronous radiation therapy.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1792-1798
• /
• 1991

In this paper the path independent $J_{k}$(k=1, 2) integrals are evaluated in a rectilinear anisotropic body for two dimensional case. The relationship among elastic constants are examined. Using those relationship the expression of $J_{2}$ Integral in terms of $K_{I}$ is found to be very simple.e.e.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.422-423
• /
• 2022

국제해사기구의 e-Navigation 전략은 선박에 새로운 기술을 도입하여 더욱 편리하고 안전한 항해를 지원하는 것이다. e-Navigation 전략 이행을 위해 다양한 해양 정보 서비스에서 발생 가능한 요구사항을 수용할 수 있는 공통 데이터 모델이 필요하게 되었고, 최종적으로 국제수로기구의 S-100 표준이 선정되었다. 이 중 해양기상정보를 차세대 전자해도정보시스템에서 표출하기 위한 S-41X 제품표준은 현재 개발이 미완료된 의 논의가 시작되고 있는 상황이다. 본 논문은 S-41X 제품표준 중 격자 데이터 기반의 S-413 제품에 대한 데이터 모델을 설계하였다. 또한 격자 데이터 형식을 지원하는 타 S-100 데이터 제품을 참고하여 국내 원시자료인 기상청 수치예보모델 결과를 활용한 제품 인코딩 테스트 단계의 연구를 수행하였다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.1
• /
• pp.47-55
• /
• 2010

UV-screening agents have some adverse effects that raise consumers' concern. The organic agents often cause irritation and may penetrate into human body while the inorganic agents raise aesthetic issues because they often turn opaque. Organic agents with high molecular weights and nano-sized inorganic agents have been developed respectively to minimize transdermal intrusion into human body and suppress turning opaque. Recently, we reported preparation of powdery UV-screening agents made of polysilsesquioxane, an organic-inorganic hybrid material. Powders would not penetrate into epidermis and organic-inorganic hybrid nature would suppress the opaqueness problem. In this study, we continued our research on this powdery polysilsesquioxane UV-screening agent, SESQUV, regarding its chemical composition, its synergic UV-screening effects when mixed with other organic agents, and its applicability in practical formulation. Results showed SESQUV was promising UV-screening agents useful in sunscreen formulation.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.23-29
• /
• 2019

Rechargeable battery such as lithium-ion battery has been noticed as a kinds of the energy storage system in the recent energy utilization and widely used actually in various small electronic equipment and electric vehicles. However, many thermal runaway caused battery accidents occurred recently, which still is obstacle for advanced application of lithium ion battery. One of the main differences to general fires is the existence of ionized electrolyte with electron during combustion. Therefore, we simply simulated the ion addition effects of battery fires by introducing an ionized fuel in jet diffusion flames. When the ionized methane through a corona discharge was used as fuel, the overall flame stability and shape such as flame length showed no significant difference from normal methane flame, but NOx and CO emissions measured at the post flame region decreased. The ion addition effect of methane oxidation was also numerically simulated with the modeling of hydrogen addition in the mixture. It was confirmed that the hydrogen addition at a fixed temperature had a similar effects on ionization of methane and hence could be modeled successfully.

• Journal of Life Science
• /
• v.24 no.11
• /
• pp.1209-1216
• /
• 2014

The aim of this study was to investigate the effect of water-soluble sulfated ${\beta}$-glucan (SBG) obtained from Ganoderma lucidum mycelia on the antihyperlipidemic and serum lipid levels in high-fat diet-induced obese rats. Five-week-old male Sprague-Dawley rats were fed a high-fat diet for two weeks to induce obesity. They were ten divided into five groups-normal control diet group (NC), high-fat control diet group (HC), high-fat diet and 200 mg/kg of SBG group (HC-HSBG), high-fat diet and 20 mg/kg of SBG group (HC-LSBG), and high-fat diet and 20 mg/kg of lovastatin group (HC-Lov)-and fed one of five diets for two more weeks. Although food intake and final body weight after four weeks of SBG consumption were similar in the five experimental groups, food efficiency ratio was higher in the high-fat diet groups(2, 3, 4, and 5) than in the NC group. In evaluating the hematological parameters of the rats, the neutrophil and monocyte ratios were higher in the HC-HSBG, HC-LSBG, and HC-Lov groups than in the HC group. Serum lipid profiles were analyzed after a 12 hr fast at the end of the study. Total cholesterol, triglyceride, and low-density lipoprotein cholesterol (LDL-C) levels were significantly lower in the HC-HSBG and HC-LSBG groups than in the HC group. These results suggest that chemically engineered sulfated mushroom ${\beta}$-glucan (SBG) might contribute to lower cholesterol and lipid levels in blood.