• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.3
• /
• pp.135-140
• /
• 1999

To simulate the wave transformation by an energy dissipation region, a numerical model is suggested by discretizing the elliptic mild-slope equation. Generalized conjugate gradient method is used as solution algorithm to apply parabolic approximation to open boundary condition. To demonstrate the applicabil-ity of the numerical procedure suggested, the wave scattering by a circular damping region is examined. The feature of reflection in front of the damping region is captured clearly by the numerical solution. The effect of the size of dissipation coefficient is examined for a rectangular damping region. The recovery of wave height by diffraction occurs very slowly with distance behind the damping region.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.5
• /
• pp.139-149
• /
• 1998

동적하중하에서 강섬유보강 콘크리트(SFRC)는 유연도 및 균열억제에서 우수한 재료로서 최근에 각종 구조물에 널리 사용되었으며, 특히 내진설계를 위한 강섬유보강 콘크리트 의 재료적 감쇠에 관한 규명이 절실히 요구되고 있다. 본 연구는 강섬유보강 콘크리트(SFRC)보의 재료적 감쇠효과증진을 실험적 및 수치해석적 방법으로 규명하는 데에 목적이 있으며, 일반적으로 강섬유 보강콘크리트(SFRC)보의 감쇠거동은 인장철근비, 강섬유의 혼입량과 형태, 콘크리트의 강도 그리고 응력의 크기에 좌우된다. 강섬유보강 콘크리트보의 감쇠비는 보의 균열상태 변화에따른 동적실험결과로부터 얻을 수 있으며, 일반적으로 강섬유보강 콘크리트는 증가된 에너지감쇠능력으로 인장철근이 소성전 상태에서 철근 콘크리트보의 경우보다 향상된 감쇠거동을 갖고 있는 것으로 판명되었다. 이들 결과의수치해석적인 입증을 위하여 curvature(곡률)와 감쇠값사이의 관계를 기초로 유한요소프로그램 (TICAL)을 개발하였으며, 결론적으로 0.44%인장철근비을 갖고 있는 강섬유보강 콘크리트의 감쇠비는 하중상태에 따라 철근 콘크리트보의 경우보다 약 5%에서 35%정도 향상된 감쇠비를 갖고 있는 것으로 조사되었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.449-453
• /
• 2010

본 논문에서는 점성 및 감쇠가 있는 단자유도 구조물의 등가감쇠비를 효율적으로 구하는 방법을 제시하였다. 건물에 설치된 마찰감쇠기는 외력의 크기에 따라 정지와 운동의 상태를 반복하여 외부 입력에너지를 소산시키기 때문에 외력과 응답관계가 비선형이다. 마찰감쇠기가 설치된 단자유도 건물은 마찰감쇠기외에 점성감쇠가 동시에 존재하므로 해석적인 정해를 구하기가 어렵다. 등가감쇠비를 산정하기 위해서 첫째, 점성과 마찰감쇠가 있는 단자유도계 건물의 자유진동 정해를 통하여 변위응답과 가속도 응답특성을 분석하였다. 둘째, 자유진동의 경우 응답이 멈출 때까지 소산에너지식을 이용하여 등가점성감쇠비를 구하였다. 셋째, 조화가진 일 때는 수치해석을 통하여 마찰력비 $F_r$에 따른 응답 특성을 알아보았다. 넷째, 조화가진의 경우 에너지 균형식을 바탕으로 등가점성감쇠비를 유도하였다. 등가점성감쇠비는 변위응답비의 영향을 받으므로 응답을 알아야만 구할 수 있다. 건물 응답의 진동수 특성은 협소영역(narrow band)이므로 고유진동수에 의해 지배된다고 가정하여 등가점성감쇠비를 구하였다. 마지막으로, 유도한 자유진동과 조화가진의 등 가점성감쇠비를 이용한 등가선형운동방정식의 해를 비선형 수치해석 한 결과와 비교하여 검증하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.1
• /
• pp.89-98
• /
• 2000

본 연구에서는 비비례 감쇠시스템을 효율적으로 해석할 수 있도록 모드 가속도법(mode acceleration method)과 모드 절삭 보강법(modal truncation augmentation method)을 확장하고 그 사용성을 검증하였다,. 비례 감쇠시스템의 동응답해서에 널리 사용되는 모드 가속도법과 모드 절삭보강법은 누락된 고차모드의 영향을 보정하여 모드 중첩법의 결과를 개선하는 방법이다. 기존의 방법들로 비비례 감쇠시스템을 해석하는 경우 비비례 감쇠특성을 무시하지 않으며 정확하고 효율적으로 해석할 수 있도록 모드 가속도법과 모드 절삭보강법을 확장하였다. 비례 감쇠시스템에서는 모드 가속도법보다 모드 절삭보강법이 더 효율적인 반면에 비비례 감쇠시스템에서는 대부분의 경우에 있어서 확장된 두 방법의 효율성이 동일하다. 그러나 수치적 안정성은 확장된 모드 가속도법이 모드절삭 보강법보다 우수하다. 이와 같은 확장된 모드 가속도법과 모드 절삭보강법의 사용성 검？을 위해서 이론적 방법과 수치예제를 수행하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.4
• /
• pp.232-239
• /
• 2016

In this study, the two-way coupled analysis method of LES-WASS-2D and DEM has been newly developed to review numerically wave attenuation due to behavior of vegetation zone could not yet applied in numerical analysis. To verify the applicability, two-way coupled analysis method is analyzed comparing to the experimental result about characteristics of wave attenuation using vegetation. Numerically analyzed behavior and characteristics of wave attenuation according to height length, distribution length, spacing of vegetation zone and incident wave conditions. It was confirmed to be effective of 3~4% wave attenuation were increased height length and distribution length, narrowed spacing of vegetation. Finally, this study is applicable to behavior and wave attenuation prediction of vegetation zone.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.2 s.42
• /
• pp.7-15
• /
• 2005

Numerical analysis model is proposed to predict the dynamic behavior of a single-degree-of-freedom structure that is equipped with hybrid base isolation system. Hybrid base isolation system is composed of friction pendulum systems (FPS) and a magnetorheological (MR) damper. A neuro-fuzzy model is used to represent dynamic behavior of the MR damper. Fuzzy model of the MR damper is trained by ANFIS (Adaptive Neuro-Fuzzy Inference System) using various displacement, velocity, and voltage combinations that are obtained from a series of performance tests. Modelling of the FPS is carried out with a nonlinear analytical equation that is derived in this study and neuro-fuzzy training. Fuzzy logic controller is employed to control the command voltage that is sent to MR damper. The dynamic responses of experimental structure subjected to various earthquake excitations are compared with numerically simulated results using neuro-fuzzy modeling method. Numerical simulation using neuro-fuzzy models of the MR damper and FPS predict response of the hybrid base isolation system very well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5306-5313
• /
• 2011

Most previous studies for finding optimal design parameters of a tuned mass damper(TMD) have been focused on the harmonic excited single-degree-of freedom system. In this study, optimal values of damping ratio and tuning frequency ratio of a TMD applied to control a seismically excited structure are investigated through numerical analyses. Considering that the structural responses due to earthquake loads are strongly dependent on the soil condition, the site effects on the optimal parameters of the TMD are studied and compared to those presented by previous studies. Numerical analyses results indicate that better control performance can be obtained by using the parameters proposed by this study in the seismic application of the TMD.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.281-284
• /
• 2009

Acoustic tuning frequency of quarter-wave resonators is investigated numerically to suppress combustion instability in a liquid rocket engine. A quarter-wave resonator is adopted, which was designed from the cold acoustic test for optimal damping condition. First, in a model combustion chamber scaled down from a full-scale chamber, reactive flow filed is analyzed numerically and acoustic-pressure responses are examined. Next, thermodynamic properties in the resonators are predicted. Based on the data, frequency tuning method is studied. The optimum tuning length of each resonator is proposed and thereby, sufficient damping is produced.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.3
• /
• pp.1-8
• /
• 2010

Acoustic tuning of quarter-wave resonator is investigated numerically to suppress combustion instability in liquid rocket engines. A model combustion chamber is adopted. First, basic acoustic characteristics are examined and acoustic damping is pursued by quarter-wave resonators. Next, for frequency tuning of the resonators, thermodynamic properties inside the acoustic resonators are estimated based on the numerical data. Maximum damping capacity is obtained when the resonators are designed to have the optimum length calculated with the properties. But, damping capacity induced by the resonators with the same length is comparable with it.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.1
• /
• pp.23-31
• /
• 1994

Sound scattering by cylindrical tubes submerged in water is numerically analyzed with material attenuation considered. Complex wave numbers is introduced to see the effects of material attenuation on resonance scattering Backscattering pressures from the shells immersed in water are calculated for air-filled aluminium and acryl tubes. In order to investigate the resonance characteristics in detail, numerical analysis program has been completed which enables us to evaluate the effects of material attenuation. The testing of the program by comparison with previous results is reported and calculation results are compared and discussed for both aluminium and acryl tubes with material attenuation considered. The resonance peak and width is strongly affected by attenuation and this becomes severe as the peak is sharp and narrow and $k_{1{\alpha}}$ is high.