• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.593-599
• /
• 2021

The demand for e-VTOL aircraft is expected to be increased rapidly in the future as a means of urban transportation due to operating cost reduction, eco-friendliness and convenience of vertical take-off and landing using pilot-aids automation system. However, there are many technical hurdles to be solved in securing safety and certification which are essential for commercialization and urban operation. So far, there is no e-VTOL aircraft that has received type certificate and standard airworthiness certificate due to the technical problems and safety requirement differences with conventional aircraft. The e-VTOL aircraft certification should also meet the equivalent level of safety required by the current airworthiness standards, but there are existing problems in securing safety and meeting current standards. In this study, the e-VTOL's certification problems and technical limitations in satisfying the current standards are presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.819-828
• /
• 2022

Sensitivity of aircraft sizing depending on battery performance was studied for a generic quad tilt rotor type electric vertical takeoff and landing vehicle. The mission requirements proposed by Uber Elevate and NASA were used for initial sizing, and the calculated gross weight is ranged between 5,000lb and 11,000lb for battery specific energy range of 200-400Wh/kg in pack level and continuous discharge rate range of 4-5C. For the assumed gross weight of 7,000lb, the required battery performance was calculated with two different criteria: available power and energy, and the effects of battery specific energy and discharge rate are analyzed. The maximum discharge rate is also recommended considering failure cases such as one battery pack inoperative and one prop rotor inoperative.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.448-455
• /
• 2022

In this study, when establishing a UTM(UAS Traffic Management) system, a corridor must be set to separate the flight distance between unmanned aerial vehicles, and the size of the corridor was calculated in consideration of TSE(Total System Error). The flight data of the straight section and the turning section were collected using a hybrid vertical take-off and landing unmanned aerial vehicle. The flight data were derived from the TSE using the SQSM(Scalar Quantity Summation Method) method, and the impact on the straight and turning sections was analyzed by calculating in detail by NSE(Navigation System Error) and FTE(Flight Technical Error). The corridor size was calculated by referring to the TSE analysis results and PBN (Performance-based Navigation) manual.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.788-797
• /
• 2023

In this paper, we introduced a test environment to test a vision-aided navigation system, as an alternative navigation system when global positioning system (GPS) is unavailable, for vertical take-off and landing (VTOL) unmanned aerial system. It is efficient to use a virtual environment to test and evaluate the vision-aided navigation system under development, but currently no suitable equipment has been developed in Korea. Thus, the proposed test environment is developed to evaluate the performance of the navigation system by generating input signal modeling and simulating operation environment of the system, and by monitoring output signal. This paper comprehensively describes research procedure from derivation of requirements specifications to hardware/software design according to the requirements, and production of the test environment. This test environment was used for evaluating the vision-aided navigation algorithm which we are developing, and conducting simulation based pre-flight tests.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.639-648
• /
• 2023

In modern society, UAM (Urban Air Mobility) transportation system is being developed as an alternative to urban traffic congestion and environmental problems, and electric vertical take-off and landing (eVTOL) is a combination of vertical take-off and landing function and electric power. It is attracting attention as an innovative next-generation transportation method as an eco-friendly alternative that reduces noise and air pollution by providing efficient mobility within the city. Since eVTOL development requires designing and implementing airframes suitable for various mission purposes, the power system needs to be developed as a platform concept before airframe development. In this study, we empirically proposed a test bench concept equipped with a stable power supply and an efficient control system, essential in developing a power platform with a combined function in the form of a fuselage and module type specialized for various mission purposes. The proposed drivetrain platform test bench consists of a system verifying the stable take-off and landing software and a power platform adjusting the motor's thrust. It will serve as a verification system that can be developed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.9
• /
• pp.599-608
• /
• 2022

Urban air mobility (UAM) equipped with rotor system is subject to ground effect at vertiport during takeoff and landing. The aerodynamic performance of the aircraft in ground effect should be analyzed for the safe operation. In this study, The ground effects on the aerodynamic performance and wake structure of the quadcopter electric vertical takeoff and landing (eVTOL) configuration equipped with coaxial counter-rotating propellers were investigated by using the lattice Boltzmann method (LBM). The influence of the ground effect was observed differently in the upper and lower propellers of the coaxial counter-rotating propeller system. There was no significant change in the aerodynamic performance of the upper propeller even if the propeller height above the ground was changed, whereas the averaged thrust and torque of the lower propeller increased significantly as propeller height decreased. In addition, the amplitude of the thrust fluctuation tended to increase as the propeller height decreased. The propeller wake was not sufficiently propagated downstream and was diffused along the ground due to the outwash flow developed by the ground effect. The impingement of the rotor wakes on the ground and a fountain vortex structure were observed.

• Journal of Advanced Navigation Technology
• /
• v.14 no.4
• /
• pp.479-488
• /
• 2010

The aim of this paper is to research the change in the turbulent flow and the AOA occurred by the wind perpendicular to the direction of runway according to the three-dimensional numerical analysis. The maximum amplitude of AOA variation on runway reached $6^{\circ}$ within 1 second because of the wake formed by the constructions in the vicinity of the airport. The overall effects appeared in aperiodic forms. It was also observed the rapid flow generated between the buildings shifted into the existing wake and eventually merged with it. It is expected thai the strong wake will cause instability during takeoff and landing.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.spc3
• /
• pp.262-268
• /
• 2012

In the recent research technical solutions have been studied to integrate renewable energy into unmanned aerial vehicles to use it as the main power source. As the weight of the aerial vehicle body is essential for its performance, we consider to use light-weight solar cell technology. Furthermore fuel cells are also integrated create a highly energy-efficient aerial robot. In this paper, construction concept and software design of the tilt-rotor aerial vehicle GAORI is introduced which uses solar cells and fuel cells as power source. The future work direction and prognosis are discussed.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.163-166
• /
• 2005

사이클로콥터는 회전축에 평행하게 회전하는 블레이드로 구성된 사이클로이드 블레이드 시스템으로부터 추력을 얻는 수직이착륙 무인기이다. 본 논문에서는 공기역할을 고려한 최적 설계를 통해 결정된 로터 형상을 갖는 사이클로콥터에 대해서 구조 해석을 수행하였다. 복합재료 블레이드의 적층각, 적층수 등을 MSC/NASTRAN 과 반응면 기법 등에 의해서 결정하였다. 블레이드를 포함한 로터 정적 해석을 통해 각 요소가 허용 응력 이내의 값을 가짐을 확인하였고, 동적 해석을 통해 주요 저차 모드가 로터 회전과 불일치하게 함으로써 공진의 가능성을 없앴다.

• Journal of Institute of Convergence Technology
• /
• v.5 no.2
• /
• pp.1-6
• /
• 2015

Flying Saucer(flying disk type UFO) is a rotating disk that flies through the air. Thus, the aerodynamical features of the Flying Saucer can be estimated by taking a close look on the aerodynamics of the rotating disk. In the present paper, the aerodynamics of the rotating disk are reviewed focusing on the their application to the possibility of the UFO type VTOL aircraft. Finally, a combination of Avro Aircraft and Frisbee concepts is suggested as a possible new UFO type VTOL aircraft.