• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.350-355
• /
• 2009

Bond strength depends on characteristics of bonding surface and restorative technique. The majority of studies dealing with dentin bond strength were carried out on flat bonding surface, therefore, difference of bond strength between axial wall and pulpal wall is not clear yet. This study evaluated bonding difference between cavity walls in class I composite resin restoration with different filling techniques. Twenty extracted caries-free human third molars were used. Cavities were prepared in 6 ${\times}$4 ${\times}$3 mm box-type and divided into four groups according to filling technique and bonding surface: Group I; bulk filling - pulpal wall, Group II; bulk filling - axial wall, Group III; incremental filling - pulpal wall, Group IV; incremental filling - axial wall. Cavities were filled with Filtek $Z250^{(R)}$(3M/ESPE., USA) and Clearfill SE $bond^{(R)}$(Kuraray, Japan). After 24 hour-storage in $37^{\circ}C$water, the resin bonded teeth were sectioned bucco-lingualy at the center of cavity. Specimens were vertically sectioned into 1.0 ${\times}$1.0 mm thick serial sticks perpendicular to the bond surface using a low-speed diamond saw (Accutom 50, Struers, Copenhagen, Denmark) under water cooling. The trimmed specimens were then attached to the testing device and in turn, was placed in a universal testing machine (EZ test, Shimadzu Co., Kyoto, Japan) for micro-tensile testing at a cross-head speed of 1 mm/min. The results obtained were statistically analyzed using 2-way ANOVA and t-test at a significance level of 95%. The results were as follows: 1. There was no significant difference between bulk filling and incremental filling. 2. There was no significant difference between pulpal wall and axial wall, either. Within the limit of this study, it was concluded that microtensile bond strength was not affected by the filling technique and the site of cavity walls.

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.453-460
• /
• 2010

Objectives: To evaluate the accuracy and consistency of two different apex locators at both the Apex and 0.5 marks. Materials and Methods: Twenty-six root canals was scheduled for extraction for periodontal or prosthodontic reasons. Thirteen canals were measured using Root ZX and the rest by i-ROOT. The root canal length was measured both the at 0.5 mark and the Apex mark. The file was then fixed to the toot, and the distance from the file tip to the major foramen of each canal was measured after removing the root dentin under the microscope so that the major foramen and the file tip were seen. Results: 1. When the Apex mark was used, 100% of both the Root ZX and i-ROOT groups were within 0.5 mm of the major foramen. 2. When 0.5 mark was used, 100% of the Root ZX group and 77% of the i-ROOT group were within 0.5 mm of the major foramen. 3. In terms of standard deviation and quartile value, the Apex mark was more consistent than 0.5 mark in the Root ZX group, and 0.5 mark was more consistent in the i-ROOT group, but there was no statistically significant difference when compared with t-test. 4. The root canal length difference between the Apex mark and 0.5 mark was 0.22 mm and 0.46 mm in the Root ZX and i-ROOT groups, respectively. Conclusions: In this study, the Apex mark was the more consistent mark. Therefore, it is recommended to subtract 0.5 mm, which is the average length between the apex and apical constriction, from the root canal length at the Apex mark to obtain the working length clinically.

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.445-452
• /
• 2010

Objectives: The aim of this study was to compare apical sealing ability and physical properties of MTA, MTA - AH-plus mixture (AMTA) and experimental Portland cement - Epoxy resin mixture (EPPC) for a development of a novel retro-filling material. Materials and Methods: Forty-nine extracted roots were instrumented and filled with gutta-percha. Apical root was resected at 3 mm and the retro-filling cavity was prepared for 3 mm depth. Roots were randomly divided into 3 groups of 15 roots each. The retro-filling was done using MTA, AMTA, and EPPC as the groups divided. Four roots were used as control groups. After setting in humid condition for 24 hours, the roots were immersed in 1% methylene blue dye solution for 72 hours to test the apical leakage. After immersion, the roots were vertically sectioned and photos were taken to evaluate microleakage. Setting times were measured with Vicat apparatus and digital radiographs were taken to evaluate aluminum equivalent thickness using aluminum step wedge. The results of microleakage and setting time were compared between groups using one-way ANOVA and Scheffe's post-hoc comparison at the significance level of 95%. Results: AMTA and EPPC showed less microleakage than MTA group (p < 0.05). AMTA showed the highest radio-opacity than other groups and the novel EPPC showed 5 mm aluminum thickness radio-opacity. EPPC showed the shortest initial and final setting times than other groups while the MTA showed the longest (p < 0.05). Conclusions: Under the condition of this study, the novel composite using Portland cement-Epoxy resin mixture may useful for retro-filling with the properties of favorable leakage resistance, radio-opacity and short setting time.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.69-79
• /
• 2007

The purpose of this study was to investigate the effects of composite resin restorations on the stress distribution of notch shaped noncarious cervical lesion using three-dimensional (3D) finite element analysis (FEA). Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072 ; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid or flowable resin and each restoration was simulated with adhesive layer thickness ($40{\mu}m$) A static load of 500 N was applied on a point load condition at buccal cusp (loading A) and palatal cusp (loading B). The principal stresses in the lesion apex (internal line angle of cavity) and middle vertical wall were analyzed using ANSYS. The results were as follows 1. Under loading A, compressive stress is created in the unrestored and restored cavity. Under loading B, tensile stress is created. And the peak stress concentration is seen at near mesial corner of the cavity under each load condition. 2. Compared to the unrestored cavity, the principal stresses at the cemeto-enamel junction (CEJ) and internal line angle of the cavity were more reduced in the restored cavity on both load con ditions. 3. In teeth restored with hybrid composite, the principal stresses at the CEJ and internal line angle of the cavity were more reduced than flowable resin.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.45-55
• /
• 1998

Phytoplankton community and primary productivity have been investigated in a fall season in the southern coastal waters of the last Sea, Korea. A strong thermocline formed at the 20\~60\;m$ layer and a cold water mass also existed in the bottom around Yong-il Bay. The offshore of the surveyed area was likely to be influenced by relatively warmer water, whereas the inshore represented Higher primary productivity with lower water temperature and lower salinity. A total of 133 species of phytoplankton occurred, representing 107 spp. of diatom, 23 spp. of dinoflagellate 3 spp. of silicoflagellate. Skeletonema costatum and Asterionellepsis glacialis were most predominant with more than $30\%$ dominance ratio, while Leptocylindrus danicus was also dominant at all transect lines. Standing crops of phytoplankton ranged from $2.7{\times}10^3\;to\;141.6{\times}10^3\;cell^{\ell-1}$. Chlorophyll a concentration varied with stations and layers, but the $30\~50$ m layer showed maximun with about $1.18{\mu}g{\ell}^{-1}$ rather than at the surface layer. It is believed that the maximun in standing crops and chlorophyll of phytoplankton formed at the $20\~50$ m layer above the thermocline during the survey. Phytoplankton primary productivity ranged from 0.32 to 3.04 mgC $m^{-3}\;hr^{-1}$, showing higher at the inshore than at the offshore. The range of integrated primary productivity was $263.3\~1085.5 mgC\;m^{-2}\;day^{-1}$ for the euphotic layer. Photosysthesis rates varied with the range from 0.76 to 8.04 mgC mgChl $\alpha^{-1}\;hr^{-1}$. Phytoplankton photosynthesis at the inshore was saturated at lower irradiance ($15\~35\%$ of surface) and showed higher efficiency, Thus, it revealed that the phytoplankton community probably adapted to the middle of euphotic layer because the depth of mixing layer became thinner due to the formation of thermocline.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.144-161
• /
• 1990

Pine forest communities developed in Mt. Palgong, southeastern Korea, were studied phytosociologically, with special reference to multiple management of local forests, and were classified into two communities, Pinus densiflora - Quercus mongolica community(I : mountain forest) and P. densiflora-Climbing plants community (II : valley forest) and six subgroups accompanied by several subgroups. Judging from the coincidence method, the division of communities (vegetation units) was closely related to altitude and topography. Based on vegetation units, a vertical distribution map of pine forest communities was prepared. The species composition(%) of pine forest communities under stratification, in upper and lower tree layer, teas I higher than II, in middle and shrubs lacer II higher than I (Total : Upper 15.5%, Middle 28.4%, Lower 34.6%. Shrubs 21.5%. Sum of mean coverage%i of understory vegetation was II twice as high as I (Total. shrubs 28.4%. forbs 11.4%, Graminoids 11.8%, ferns 1.0%). Based on constance, coverage and d.b.h. class etc., an actual growth and occurrence table of tree species and understory vegetation by vegetation unity were prepared, and could assume a criterion for judging potential dominance-growth conditions.

• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.359-366
• /
• 1990

This study was carried out to investigate rooting rate, plagiotrophic growth and root-promoting effect of IBA in Taxus cuspidata S, et Z. cuttings. The results obtained were summarized as follows ; 1. As the ortet ages of cuttings were increased in 5, 10, to 20 years, the rooting rates were decreased in order of 85.7%, 81.7% and 62.4%, and the number of primary roots were also decreased in 5.3, 3.7 and 2.9, respectively. 2. Rooting rate by cutting types of lateral shoot were higher than those of main shoot type, significant at the 1% level. 3. IBA(l00ppm) treatment promoted the rooting rates and the number of primary roots. 4. As the ortet ages were increased in 5, 10 to 20 years, angles of central shoot of rooted cuttings which mesured cyclophysis were decreased in order of $75.9^{\circ}$, $68.5^{\circ}$ and $59.6^{\circ}$, respectively, significant at the 1% level. 5. Average angles showed $77.0^{\circ}$ for main shoot cutting, $65.9^{\circ}$ for upper lateral shoot and $61.7^{\circ}$ for lower lateral, which was significant at 1% level, and lateral shoot cutting showed more topophysis than main shoot cutting. 6. Shoot length of rooted cuttings from main shoot cutting was longer than that from lateral shoot significant at the 1% level. 7. Relationship between some characteristics showed highly positive correlation.

• Korean Journal of Social Welfare
• /
• v.51
• /
• pp.29-61
• /
• 2002

This study was designed to find out the determinants of types of bullying behavior, and the effects of types of bullying behavior on the bullies. For this purpose, a hypothetical model which explains the relationships among 6 environmental factors, 5 types of bullying behavior, and 5 outcome variables for the bullies was developed. Using the data collected from 177 junior and high school students who have bullied the other students, the hypothetical model was tested. For data analysis, a path analysis was used, and the best-fitting model was found (df=78, GFI=0.953, CFI=1.00). As a result of analyzing the model, types of bullying behavior were found to be determined by the different environmental factors: Isolation was determined by 2 factors (feeling of isolation from friends, exposure to bullying), social bullying by 2 factors (lack of support from parents, exposure to bullying), verbal bullying by conflicts with parents, physical bullying by 3 factors (lack of support from parents, exposure to isolation and exposure to bullying), and instrumental bullying by lack of support from parents. On the other hand, the pleasure that the bullies feel after bullying behavior was increased by isolation, verbal bullying and physical bullying, while decreased by instrumental bullying. Guilt feeling was decreased by isolation and instrumental bullying, while increased by physical bullying. Isolation increased the tendency of blaming the victim. Isolation and instrumental bullying increased bullies' self-esteem, while social bullying decreased self-esteem. Verbal bullying increased the extent of bullying, while instrumental bullying decreased the extent of bullying. Based on the findings, the intervention strategies to change the bullies' attitudes toward victim, and to increase social support from the significant others as well as the effective ways to reorganize the school environment in order to reduce and prevent bullying behavior were suggested.

• Journal of The Korean Ophthalmological Society
• /
• v.59 no.11
• /
• pp.1049-1055
• /
• 2018

Purpose: To investigate the factors associated with glaucoma in patients with pseudoexfoliation syndrome by comparing features of the anterior segments and ocular biometry according to the presence or absence of open-angle glaucoma in pseudoexfoliation syndrome. Methods: We analyzed 96 patients (115 eyes) diagnosed as having pseudoexfoliation syndrome in this study. The patients were divided into two groups of simple pseudoexfoliation syndrome (64 patients, 76 eyes) and pseudoexfoliation glaucoma (32 patients, 39 eyes). We compared the age, sex, underlying disease, location of pseudoexfoliative material, iris change, degree of nuclear cataract, pupil dilatation, corneal endothelial cell counts, central corneal thickness, anterior chamber depth, axial length, corneal curvature, and intraocular pressure (IOP). Results: There were no significant differences between the two groups in terms of age (p = 0.694), sex (p = 0.161), diabetes (p = 0.440), hypertension (p = 0.238), pseudoexfoliative material observed in anterior capsule (p = 0.700), pupillary margin (p = 0.210), iris depigmentation (p = 0.526), pupillary ruff loss (p = 0.708), degree of nuclear cataract (p = 0.617), pupil dilatation (p = 0.526), central corneal thickness (p = 0.097), anterior chamber depth (p = 0.283), axial length (p = 0.095), or horizontal and vertical corneal curvature (p = 0.066 and 0.306, respectively). In pseudoexfoliation glaucoma, significantly higher IOP (p = 0.026), a high frequency of membrane formation (p = 0.047), and decreased corneal endothelial cell counts (p = 0.048) were observed. Conclusions: Pseudoexfoliation syndrome with open-angle glaucoma was shown to be associated with high IOP, decreased corneal endothelial cell counts, and a high frequency of membrane formation. Therefore, when such changes are observed in pseudoexfoliation syndrome patients, a higher risk of open-angle glaucoma should be recognized, and careful attentionis required accordingly.

• Journal of The Korean Ophthalmological Society
• /
• v.58 no.11
• /
• pp.1260-1268
• /
• 2017

Purpose: Strabismus affects any age and represents various functional or non-functional eye problems. This population-based study was conducted to determine the prevalence of strabismus and nystagmus in South Korea according to various sociodemographic factors. Methods: We acquired data from the Korea National Health and Nutrition Examination Survey, a nation-wide cross-sectional survey and examinations of the non-institutionalized civilian population in South Korea (n = 30,538), conducted from July 2008 to December 2011. The prevalence of strabismus and nystagmus were verified, and associated sociodemographic factors was evaluated. Results: The overall prevalence of strabismic disorder in participants over 3 years of age was $1.4{\pm}0.1%$ (95% confidence interval [CI] 1.3-1.6%; $1.5{\pm}0.1%$ in males, $1.3{\pm}0.1%$ in females). The prevalence of exodeviation (15 or more prism diopters), esodeviation (10 or more prism diopters), vertical deviation, and other complicated strabismus and nystagmus was 1.0%, 0.2%, 0.2%, 0.1% and 0.1% respectively. The prevalence was highest in the 6 to 15-year age group ($1.9{\pm}0.3%$), and lowest in the 40 to 49 years age group ($0.8{\pm}0.1%$) (p = 0.005). There were no statistically significant differences for gender, region, residential area, household income, educational level and occupation. Conclusions: This nation-wide epidemiologic study demonstrated that the prevalence of strabismus and nystagmus according to various sociodemographic factors in South Korea was not statistically significant except for age group. Further investigations are required based on more surveys to better recognize the etiologic or risk factors that may be related to strabismus and nystagmus.