• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.4
• /
• pp.321-328
• /
• 2014

The performance characteristics of a subscale diffuser under non-reacting conditions for high-altitude simulation were numerically investigated with respect to different lengths of the secondary throat diffuser. The ratio of the length of the diffuser entrance to the nozzle exit diameter was set to 0, 50, and 100%. In addition, flow characteristics were studied for a range of length-to-diameter ratios of the secondary throat diffuser. An insufficient diffuser entrance length caused contraction of the plume immediately after the nozzle exit. When the length-to-diameter ratio was less than 8, a strong Mach disk was formed inside the diffuser, resulting in a sharp increase in pressure. In addition, flow characteristics in the diverging part of the diffuser were investigated for a range of diverging part lengths. A short diverging part may lead to abrupt pressure recovery, resulting in the possible application of mechanical load to the diffuser.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.380-384
• /
• 1998

As the development of ultrahigh power laser system, the laser mirrors must require high-resistant and effectively cooled. So, the study for the optical multilayer systems having large thermal diffusivity become important. In this study, we designed and fabricated two-layer anti-reflection (AR) optical coating samples, in different evaporation conditions of coating speeds (10, 20 $\AA$/s) and substrate temperatures (50, 100, 150, 20$0^{\circ}C$), using two dielectric materials $MgF_2$ and ZnS which have different refractive indices and measured the through-plane thermal diffusivity by using photoacoustic effect. The optical thicknesses of $MgF_2$ and ZnS layer were fixed as 5/4λ (λ=514.5nm) and λ, respectively, and the thermal diffusivity of the samples fabricated in the different conditions was obtained from the measured amplitude of photoacoustic signals by changing chopping frequency of $Ar^+$ layer beam. The results told us that the thermal diffusivity of the sample fabricated in the condition of 10 $\AA$/s and 15$0^{\circ}C$ showed the largest value.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.3
• /
• pp.219-226
• /
• 2012

Columns are the key elements supporting load in structure. Column failure causes the structure to collapse. It is important to evaluate residual strength for damaged columns under blast load for preventing progressive collapse. In this paper, columns were investigated to compare the blast resistance on the change of the number of steel bars within the range of reinforcement ratio. And this study was carried out 4 different analytical models to evaluate effects of aspect ratio. The results indicate that the vertical strain was unaffected by the number of steel bars and aspect ratio. As the number of steel bars facing blast load increase, the blast resisting capacity of the columns was improved in the lateral strain. Also, the analysis results showed that a large moment of inertia of area, as compared to a small one would be superior in residual strength as well as force of restitution.

• Journal of Aerospace System Engineering
• /
• v.11 no.1
• /
• pp.1-7
• /
• 2017

While a satellite is carried into orbit by a launch vehicle, it is exposed to the severe launch environment with random vibrations and shock. Accordingly, these vibration sources affect electronic equipment, particularly the printed circuit board (PCB) in the satellite. When the launch load impacts the PCB, it causes negative behavior. This causes perpendicular bending around the boundary of fixation points that finally leads to the failure of solder joints, lead wires, and PCB cracks. To overcome these issues, the electronic equipment design must meet reliability requirements. In this paper, Steinberg's method is used to derive allowable and maximum deflection to verify design from a life perspective concerning the control board of the Antenna Pointing Driver (APD) mounted on KOMPSAT-3.

• Journal of the Korea Convergence Society
• /
• v.9 no.2
• /
• pp.177-182
• /
• 2018

In this paper, the fracture behaviour at CFRP laminated structure due to the vertical falling impact of the fight drone frame composed of CFRP was investigated through the analytical study. As CFRP consists of fiber differently from the existing plastic material, the fracture behaviour becoms complex. So, the preceding study is important through the analytical study before this experiment. By comparing with the existing study model at the same condition as the result of this study, the applied stress value is shown to decrease greatly at the analysis model with the center notch hole of the laminated CFRP drone frame. On the basis of this study result, the esthetic sense can be shown as the foundation data about the notch hole of drone frame are grafted onto the convergence technique.

• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.147-150
• /
• 2011

Since their discovery in the early 1980's, the market for bonded rare earth magnets has shown steady growth. Today these magnets are widely used for our daily life such as computer peripherals, automotive, consumer electronics, and office automation. However, the price increases of rare-earths started from the $2^{nd}$ half of 2010 became even worse in 2011. During $2^{nd}$ quarter of 2011, almost all of rare-earths showed unprecedented vertical price increases, and it brought significant impact to the related industry in terms of the price and supply. This will ask the fundamental change in the policy of the bonded rare earth industry to expand its market share, which has been highly dependent on the replacement of ferrite magnets via relatively higher performance compared to the price at certain applications. In order to achieve the sustainable growth of bonded rare-earth magnets in the future, it needs to change the current paradigm and setup the new business model. This article includes a brief summary of the rare earth price trend and the applications of the rare-earth bonded magnets. The efforts to improve the performance and diversify the applications for future growth have been also presented.

• Elastomers and Composites
• /
• v.41 no.3
• /
• pp.172-181
• /
• 2006

Flame retardant synergism of phyllite was studied in ABS resins containing brominated flame retardant(tetrabromobisphenol A(TBBA) or brominated epoxy oligomer(BEO)) and antimony trioxide($Sb_2O_3)$. Talc was used for the comparison purpose. ABS compounds were manufactured by a twin-screw co-rotating extruder and subsequently injection molded into several specimen for mechanical and thermal properties. Flame retardancy of ABS compounds measured by UL 94 vertical test with 1.6 mm thick bar specimen was enhanced by the replacement of antimony trioxide into phyllite or talc in the range of 12.5%(0.5 wt%) to 37.5%(1.5 wt%). Phyllite showed better synergistic effect comparing with talc especially for BEO. Only phyllite enhanced the flowability of ABS compounds. Notched Izod impact strength decreased with the proportion of phyllite or talc content. Phyllite could replace the antimony trioxide up to the content of 25%(1 wt%) to give better flame retardancy and flowability without darkening problem.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.1-9
• /
• 2005

The interaction between hypersonic free stream and side jet flow at high altitudes is investigated by using the direct simulation Monte Carlo (DSMC) method. In order to alleviate the difficulty associated with the large density difference between the free stream and the side jet flow and to simulate the two flows simultaneously, a weighting factor technique is applied. For validation, the corner flow over a pair of plates perpendicularly attached is calculated with and without a side jet, and the results are compared with experiment. For a more realistic configuration, the flow past a blunted cone cylinder shape is solved. The leeward or windward jet is injected into the free stream and the effect on the aerodynamic force and moment is observed at various flow angles. The lambda shock effect and the wake structure are studied in terms of the surface pressure differential. A higher interaction between the free stream and the side jet flow is observed when the side jet is injected in the windward direction.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.3
• /
• pp.27-32
• /
• 2004

The oceanic tides have an effect on groundwater levels in coastal fractured rock aquifers. The observed groundwater table fluctuations caused by the effective stress through an aquifer are shown as sine curves similar with tidal fluctuation. To estimate a hydrogeologic parameter, tidal method is utilized with groundwater level fluctuations of two monitoring wells. Cross correlation function is used to calculate time lags between observed groundwater levels and tide, and the deeper well shows longer time lag. The storage coefficients calculated by using tidal efficiency and time lag show large differences. The storage coefficients obtained by using time lags are close to the result of slug test, and that of the deeper well shows closer value by slug test. The tidal efficiency is unsatisfied to apply in the tidal method because of an effect of phreatic aquifer and the vertical flow of groundwater through fractured confining bed. This tidal method can be an economical and effective way to define the parameter by considering the location of observation well and hydrogeologic characteristics of a coastal aquifer.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.2
• /
• pp.5-12
• /
• 2022

In this study, a field test was conducted to present a test method for performance evaluation of a rock fall prevention fence, centering on the vertical drop test among the existing test methods of the rock fall prevention fence. A test to determine the support capacity of a rockfall prevention fence in Korea is usually conducted using a combination of wire mesh, poles, and wire rope, and the location of the impact of falling rocks has been conducted centered on the center of the wire mesh. However, in the case of domestic papers and test data, there is no data on direct hit of post. Therefore, the amount of displacement and weak section were analyzed when the impact on 100kJ class rock energy was hit on the post, centering on the Rockfall Protection fence (highway type No. 2).