• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.161-166
• /
• 1999

The GPS ability for detecting the deformation is experimently tested by analyzing how precisely GPS can detect the true movement value of the GPS test bed with three axis. As the result, we found that GPS can detect the deformation with the precision of 2 mm in horizontal componts and 8 mm in vertical component for the short baseline of 16 km. The applicable possibilities of GPS for measuring the structure deformation are discussed on the base of this result.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.225-230
• /
• 2004

강변여과수 취수에 있어 수직정의 문제점을 해결하기 위해 방사형 집수정에 의한 취수 방식을 해결 방안으로 모색되어 지고 있다. 본 인구는 방사형 집수정에 의한 강변여과수 개발시 개략적 산출량 예측을 위한 방법으로 사용하는 경험식 (Petrovic 경험식, Milojevic 경험식) 적용성 및 군우물을 이용한 방사형 집수정 모델링 가능성에 대해 모의 하였다. 강변여과수 산출시 Milojevic 경험식이 하천의 자연조건, 설치 위치 등을 고려하여 강변여과수 적용성이 Petrovic 경험식에 비해 적용성이 크며, 군우물을 이용한 방사형 집수정 지하수위 특성에 대한 모델링에서 수위하강률 등이 유사하게 나타났다. 또한 방사형 집수정의 설치각도등을 조정함으로 수위 하강율을 감소 시킬수 있으면 체류시간 확보에 일정부분 기여 할 것으로 나타났다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.275-282
• /
• 1996

일체형 원자로는 증기발생기 및 가압기를 압력용기 내에 설치한 것으로서 연결배관이 없기 때문에 배관의 파단에 의한 대형 냉각재 상실사고를 근원적으로 배제하고 전체계통을 단순화 시킬 수 있다. 증기발생기는 대부분 관류식으로서 일체식과 모듈식이 사용되고 있다. 본 연구에서는 모듈식 나선형 증기발생기를 사용한 일체형 신형경수로의 예비 개념설계를 수행하였다. 가압기는 원자로 내에 별도의 용기를 설치하는 내장형 자기가압기를 채택하였다. 제어봉 구동장치는 핵분열 반응열을 이용한 원자로 기동을 위하여 반응도를 미세하게 조정하는 것이 가능하고 지진하중과 같은 동하중의 영향을 최소화하기 위하여 원자로용기 외부로의 돌출부분을 최소화하는 설계개념을 채택하였다. 냉각재 펌프는 Canned Motor Pump를 원자로용기 상부에 수직으로 직접 부착하는 개념을 사용하였다.

• Korean Journal of Cognitive Science
• /
• v.10 no.3
• /
• pp.51-66
• /
• 1999

Selective attention induces perceptual distortions. ranging from repulsion of objects located near the attended area(Suzuki & Cavanagh. 1997) to magnification of the u unattended objects (Tsal & Shalev. 1996). Two hypothetical mechanisms have been p postulated: a shift of receptive fields' positions away from the locus of attention(receptive-field-recruitment hypothesis) or the enlargement of perceived space around the a attended location(space-enlargement hypothesis). The present study distinguished between these hypotheses by investigating the spatial and temporal properties of attention-induced d distortions. Perceptual judgements on vernier alignment. line tilt. line length were used to measure attention-induced changes in perception. Attention was induced exogenously(by blinking a specific set of dots around the test stimuli} or endogenously(by instructing the subject to selectively attend the dots). After inducing attention. the test stimuli were briefly flashed. A staircase method was used to measure the attentional effect. A vertical line was perceived as repelled from the locus of attention. and a line segment appeared longer when attention was given to its vicinity. The effects decreased as the distance between the locus of attention or the time between the onset of attention and the stimulus presentation increased. The results imply that the space-enlargement hypothesis provides a better explanation for the attention-induced changes in perception than the receptive-field-recruitment hypothesis.

• Korean Journal of Labor Studies
• /
• v.14 no.2
• /
• pp.415-441
• /
• 2008

본 연구는 자동차부품산업의 구조조정과정에서 나타나는 산업재편과정과 노동조합의 대응을 조직환경론의 세 가지 관점으로 분석해보려고 하는 탐색적 연구이다. 조직환경론은 환경변화에 대응하는 조직의 논리와 전략을 다루는 분야이다. 따라서 조직환경론의 분야는 조직과 환경의 관계를 어떻게 보아야 할 것인가, 그리고 조직이 어떻게 환경변화에 대처하느냐, 나아가 환경의 변화를 유도하기 위하여 어떤 자원과 전략을 활용해야 하는가에 대한 유용한 시사점을 줄 수 있다. 본 연구에서는 환경과의 의존을 회피하는 것이 좋다는 자원의존관점, 오히려 환경에 대한 의존을 높여 성공할 수 있다는 협력 네트워크관점, 조직변화는 불가능하고 적소를 찾아가야 한다는 조직군생태학 관점을 적용하여 기업의 전략을 분석해보고자 하였다. 이에 따라 원청업체 의존을 회피하려는 기업, 협력네트워크관계에 적극적으로 가입하는 기업, 한국이라는 조직군을 떠나 해외로 이전하는 기업을 대상으로 설문을 분석하고 그 영향요인을 살펴보고자하였다. 분석결과 자원의존을 회피하려는 기업은 가격의 변동과 단가인하가 큰 경우 회피하려는 성향을 보였으며, 반대로 협력네트워크에 들어가려고 하는 기업은 매출의존도가 높아 납품안정성을 기하려는 목적이었으며 해외로 이전하는 기업은 장기간의 경험과 규모가 커지며 새로운 장소로 이전하는 것으로 분석되었다. 즉 자동차부품기업은 단가나 가격의 변화가 심하면 의존을 줄이려고 하며, 안정적 납품을 원할 때 의존을 늘리며 이러한 상태가 장기화되면 새로운 적소를 찾아 떠나는 경향이 있는 것으로 이해된다. 또한 노동조합의 대응차원에서 자원의존관점에 의하여 내부적 전략방향의 설정과 공동연대의 필요성을, 협력네트워크관점에 의하여 산별노조 및 연대의 필요성을, 조직군생태학 관점에 의하여 노동자 통제권의 확보문제를 이론적 차원에서 정리하고자 하였으며 실증은 추후의 연구과제로 제시하였다.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.331-342
• /
• 2008

The countries are trying to expand the sea limit such as the territorial sea, fishing zone or the exclusive economic zone as far as the Law of the Sea permit to do for the benefit of their national interest. Especially, they are eager to claim the base point where it locates far from the coastline even if it is uninhabited island or reef under the sea. The baseline has been claimed to maximize the territorial sea. Another way to expand the sea limit is to lower the vertical datum to change the land limit. China claimed Dongdo which is located about 79 miles far from the coast as the base point. Japan also claimed many uninhabited island or the reef which is located very far from the coast such as Okino Dorishima. As Korea is the party who negotiate the maritime limit with Japan and China, we should be keen and sensitive on the issues claimed by neighboring countries in terms of base point and the baseline. This paper is to review the characteristics of the base points or baselines of neighboring countries and to suggest the views how to maintain and to relocate our base points. As western coast of Korean peninsula is one of the largest tide fluctuation zone in the world, with long tidal record to prove the vertical datum adjustment, Korea can find the way to lower the vertical datum especially in Yellow Sea. So, major and critical tidal station has to be set up along the western coast to verify tide fluctuation record which can be met with international standard.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.3
• /
• pp.311-319
• /
• 2012

Purpose: One of the critical aspects on dispensing glasses is to match the center of pupils to the optical center of lenses as the mismatched glasses are able to induce uncomfortable effects called prism which has been known to induce phoria, a main cause for asthenopia in many cases. Therefore, we investigated the induced prism occurred by mismatching centers between the center of pupils and the optical center of lenses. Methods: In this study, total 103 subjects were examined whether the center of pupils and the optical center of lenses are matched in horizontal and vertical directions, and then, the data was categorized into 4 groups based on the structural components of glasses. Total amount of prism was compared to show the effect of the glasses frame on the prism induction, and the value of measured prism was compared with the German RAL-RG 915 regulations. Results: The results in respect to the horizontal component showed that the induced prism was not found in 10.7% of total subjects. 73.8% of total subjects were influenced by induced prism, the range of prism was in a tolerance level. However, the 15.5% of total subjects seemed to be influenced by prism which is out of the criterion of tolerance. In case of vertical component, 23.3% of total subjects showed no effects of prism while early adopting glasses, 54.4% of total subjects showed a little prism effect within the criterion of tolerance, and 22.3% of total subjects showed the prism effect out of the tolerance range. This data indicates that group A and B that are less likely adjustable by fitting induce more prism than group C and D in horizontal and vertical components. Conclusions: In higher refractive error condition, it was found that aligning the optical center of lenses with the center of pupils by pre-fitting of glasses frame minimized prism induction in horizontal and vertical components, which ameliorates ocular fatigue. Therefore, appropriate optometric dispensing through fitting by opticians and precise design about monocular PD and monocular Oh are necessary to improve visual perception.

• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.1-11
• /
• 2018

Discrete event system specification (DEVS) has been used in many simulations including hybrid systems featuring both discrete and continuous behavior that require a lot of time to get results. Therefore, in this study, we proposed the acceleration of a DEVS-based hybrid system simulation using multi-cores and GPUs tightly coupled computing. We analyzed the proposed heterogeneous computing of the simulation in terms of the configuration of the target device, changing simulation parameters, and power consumption for efficient simulation. The result revealed that the proposed architecture offers an advantage for high-performance simulation in terms of execution time, although more power consumption is required. With these results, we discovered that our approach is applicable in hybrid system simulation, and we demonstrated the possibility of optimized hardware distribution in terms of power consumption versus execution time via experiments in the proposed architecture.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.385-395
• /
• 2012

This clinical report presents the case using overlay dentures to treat a patient with cleft lip and palate and malocclusion. This patient requires vigorous treatment such as orthodontic treatment and combined orthodontic/oral surgery procedures. Overlay denture can be used as an alternative treatment option. Intraoral and radiographic examinations were done. The vertical dimension of occlusion was evaluated for proper prosthetic procedures and the surveying in the diagnostic cast was done. Considering the tissue and teeth undercut, the alterations of teeth shape were done. Final preparation and impression was performed. After the evaluation of vertical dimension and occlusion with wax-denture, the dentures were polymerized. Clinical remounting and occlusal adjustment were done on the articulator. Overlay dentures were delivered and the patient was recalled for relining. The overlay dentures satisfied patient's esthetic and functional requirements and provided a stable occlusion. Overlay dentures in this case were a reversible and relatively inexpensive treatment for this patient, however the potential possibilities of caries and periodontal disease as a result of poor oral hygiene should be prevented with periodic recall.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.37-49
• /
• 2021

Micropiles are widely used in construction field to enhance bearing capacity and reduce settlement of existing foundation. It has various benefits such as low construction expense, simple installation process, and small construction equipment. Recently, new microple equipped with the base expansion structure at the end has been developed to improve the foundation bearing capacity. The improvement of load capacity can be conceptually achieved by expanding the base expansion structure when a load is applied to the micropile. However, the expansion mechanism of the base expansion structure and the improvement of load capacity of the micropile were not yet experimentally validated. Therefore, in this study, a series of centrifuge model tests was performed to evaluate the effect of the base expansion structure on the improvement of load capacity. Two types of soil, sand and weathered rock, were prepared and the loading tests were performed using the real micropile with the base expansion structure. During the tests, the earth pressures surrounding the base expansion structure were monitored. As a result, when a load of 30 kN was applied to the micropile, the increase in the ratio of the horizontal to vertical pressure increment (∆σ_h/∆σ_𝜈) ranged from 0.4 to 0.58 in sand and ∆σ_h/∆σ_𝜈 = 0.19 in weathered rock, respectively. Therefore, it can be concluded that the increase in the horizontal earth pressure adjacent to the base expansion structure will improve the bearing capacity of the micropile.