• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.425-438
• /
• 2001

The delivery of optimal orthodontic treatment is greatly influenced by clinician's ability to predict and control tooth movement by applying well-known force system to dentition. It is very important to determine the location of the centers of resistance of a tooth or teeth in order to have better understanding the nature of displacement characteristics under various force levels. In this study, three dimensional finite element analysis was used to measure the initial displacement of the consolidated teeth under loading. The purpose of this study was to define the location of the centers of resistance at the upper six anterior segment. To observe the changes of six anterior segment, 200gm, 250gm, 300gm, and 350gm forces at right and left hand side each were imposed toward lingual direction. For this study, two cases, six anterior teeth and six anterior teeth after corticotomy, were reviewed. In addition, it was reviewed the effects of changes on the location of the center of resistance in both cases based on different degree of forces aforementioned. The results were that : 1. The instantaneous center of resistance for the six anterior teeth was vertically located between level 4 and level 5, which is, at 6.76mm, $44.32\%$ apical to the cementoenamel junction level. 2. The instantaneous center of resistance for the six anterior teeth after corticotomy was located vertically between level 4 and level 5, that is, at 7.09mm $46.38\%$ apical to the cementoenamel junction level. 3. Changes of force showed little effect on the location of the center of resistance in each case. 4. It was observed that the location of the instantaneous center of resistance for the six anterior teeth after corticotomy was changed more than the six anterior teeth without corticotomy to the apical part, and the displacement of the consolidated anterior teeth moved further in case of the consolidated teeth after corticotomy.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.743-760
• /
• 1997

This study was done to evaluate the correlations between the size, the form of the cranial base, head posture and the horizontal and vertical position of craniofacial structures. For this purpose, 100 cephalometric radiographs were taken from the sample composed of 51 male and 49 female, 12 measurement criteria and 37 reference points were established and digitized, then calculation was performed for the values of measurement variables and the horizontal and vertical position of reference points. The correlations be4ween them were analyzed statistically and mean facial diagrams were constructed and compared with the selected groups which were composed of 10 Samples each as large and small group from the measurement value. The following results were obtained: 1. The angles n-s-ba and n-s-ar as variables for the ion of cranial base correlated highly to the horizontal and vertical position of reference points in the cervical column with statistical significance($0.1\%$ level). 2. The angles n-s-ba and n-s-ar as variables for the form of cranial base correlated to the horizontal position of the reference points in the facial structure with statistical significance($1\%$ level), but not to the vertical position of them($5\%$ level). 3. The length n-s, s-ba, and n-ar as variables for the size of cranial base were correlated th the position of craniofacial structures in various ways, but in general, highly correlated to the horizontal and vertical position of midfacial structures around the teeth and alveolar area. 4. the angle NSL/CVT and NSL/OPT as postural variables tot the inclination of cranial base and cervical column were correlated to the horizontal position of the craniofacial structures with statistical significance($1\%$ level), but not to the vortical position of them($5\%$ level). 5. The angle OPT/HOR and CVT/HOR as postural variables lot the inclination of cranial base and true horizontal line were not correlated to the horizontal and vertical position of the craniofacial structures with statistical significance($5\%$ level). 6. The correlation between the measurement variables and horizontal and vortical positions of the reference poits in soft tissue were shown as similar to the related hard tissue points.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.54-63
• /
• 2013

In this paper, we evaluate the accuracy of the vertical positioning by distance using Network RTK-GPS. The experimental results confirm that Network RTK-GPS method can acquire data quickly and accurately than conventional leveling methods so that the Network RTK-GPS method is a relatively efficient and economical way for the vertical positioning. Results of validation using permanent GPS stations indicate that visible satellites, PDOP, and VDOP are very good for the vertical positioning. Integrated reference points such as U0997 and U0921 are satisfied with 3 ratings in the rules of public leveling and all the rest are proved improper. When the vertical positioning using Network RTK-GPS is implemented, the geoid height of EGM2008 should be applied for leveling. If the number of geodetic satellite are increasing in the near future, the vertical positioning using Network RTK-GPS can be possible in all the range.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.11a
• /
• pp.75-79
• /
• 2005

최근에 모바일 기기의 급속한 발전과 더불어 다양한 서비스들이 개발되고 있다. 그 중에서도 위치 기반 서비스는 사용자에게 위치와 관련된 유용한 정보를 제공하는 서비스를 말한다. 효과적인 서비스를 제공하기 위해서는 먼저 위치정보를 나타내는 이동 객체 관련기술 연구가 선행되어야 한다. 이러한 연구의 핵심 기술로 현재 빈발한 이동 객체 탐사를 위한 마이닝 기법들에 관한 연구가 진행되고 있다. 본 연구에서는 기존의 수평적 마이닝 기법에서 문제시되었던 많은 후보 이동 객체 발생을 줄이기 위해 새로운 수직적 마이닝 기법을 적용한 방법을 제안한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.343-352
• /
• 2012

In order to precisely determine the vertical displacements of CORS antenna phase centers caused by their replacement, intensive research has been carried out in this paper throughout processing GPS measurements made before and after the events. After applying the estimated displacement in the data processing, results show that coordinate repeatability of the vertical component is able to be 7.9mm on average. Comparing with results (e.g., 23.5mm) without applying the displacement, it was possible to conclude that these accuracies are significantly improved, which is equivalent to those before the event of the replacement.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.210-213
• /
• 1999

수동소나체계에서 음원의 위치와 관련된 매개변수를 산출하기 위해 정합장처리(Matched Field Processing)가 이용된다 본 연구에서는 수직선배열센서를 이용한 정합장처리에서 음원 위치추정에 영향을 미치는 다양한 요인 중, 수직음속분포 오정합(mismatch)에 의한 영향을 MV 프로세서 (Minimum Variance Processor)를 이용하여 모의실험함으로써 그 결과를 분석하였다. 천해 모의환경에서 동일한 기울기로 증감하는 수직음속분포 오정합은 음원 위치추정에서 거리성분의 오차를 가지며, 상이한 기울기를 갖는 수직음속분포 오정합은 거리와 수심 성분의 오차가 유발됨을 확인할 수 있었다. 심해 모의 환경에서 수직음속분포 오정합은 거리와 수심 성분의 오차가 유발되고, 거리추정의 전반적인 경향은 천해의 동일한 기울기를 가지는 경우와 유사함을 확인할 수 있었다.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.425-432
• /
• 1995

The purposee of this study is to investigate the correlation between the horizontal and vertical discrepancy of facial bones and the horizontal and vertical position of glenoid fossa. For this study, the cephalograms were taken to the adults over 18 of age(96 men and 108women). The cephalograms were divided into three groups according to the ANB angle(below 0.5 degree, 0.5 to 4.0 degree and above 38 degree), and they were divided into three groups according to the SN-MP angle(below 30 degree, 30 to 38 degree and above 38 degree). The following conclusions were obtained : 1. In the horizontal discrepancy of facial bone(ANB), the horiontal position of glenoid fossa(X) was anterior position as the order of Class II, Class I, Cias III. 2. The horizontal position of glenoid fossa(X) showed the significant correlation with ANB and SNB, but not with SNA. 3. In the vertical discrepancy of facial bone(SN-MP), thee less anglee was the greater vertical position of glenoid fossa (X) and was followed by the medium and high angle in order. 4. The vertical position of glenoid fossa(Y) showed thhat the SN-FH was the most significant correlation, and it was followed as the order of SN-FH, SN-MP and SN-OP angle. 5. There was the samllest length of anterior cranial base in the Class III malocclusion.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.2
• /
• pp.145-151
• /
• 1994

앞 턱 부위가 짧고 후방으로 위치해 있을 때 턱의 높이를 증가시키고 전방으로 돌출시키는 축조 이부성형술의 방법으로는, 매식체 삽입술, 골 절단술, 골 절제술 또는 이들을 동시에 시행하는 혼합술등이 행해져 왔다. 그러나 매식체 삽입술에서는 감염 또는 매식체의 유동성 등의 합병증의 발병이 빈발하고 매식체의 밑 부위에 골이 흡수된다든지 연조직의 변화를 예측하기 어렵다든지 하는 복잡한 문제점들이 종종 보고되고 있다. 따라서 매식체를 이용하지 않는 골 절단술이나 골 절제술만을 이용한 다양한 방법의 이부성형술이 많이 시행되고 있다. 하악골이 전후방 관계로 발육부전인 환자에게 양측 하악지 시상분할술을 시행하여 전방 이동시킨 후 앞 턱의 위치를 좀더 개선하기 위하여 $Michel{\'{e}}t$ 테크닉의 변형법을 이용한 이부성형술을 추가로 시행하였다. 이 방법의 이부성형술은 턱의 수직적, 수평적 길이를 증가시키기 위하여 하악결합면 부위에 장부와 장붓구멍 모양을 한 골 절단술을 시행하고 광범위한 연조직경을 보존하여 골편으로의 혈류 차단을 최소화하였으며 나사를 이용한 견고한 고정을 용이하게 하였다. 이 술식은 턱을 수직적으로 증가시킬 때 두 골편 사이의 공간에 골 이식을 시행할 필요가 없으며, 금속판을 이용하지 않아도 정확한 위치에 골편을 고정하기가 용이하고, 또한 고정용 나사가 향후 골형성 부위에 위치하게 된다는 장점을 경험하게 되어 이에 한 증례를 보고하는 바이다.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.401-411
• /
• 2002

Precise bracket positioning is essential in modem orthodontics. However, there can be alterations in the vertical position of a bracket due to several reasons. The purpose of this study was to evaluate the effect of variations in the vertical bracket position on the crown inclination in Korean patients with normal occlusion. From a larger group of what was considered to be normal occlusions obtained from the Department of Orthodontics, College of Dentistry, Seoul National University, each of the final 10 subjects (6 males and 4 females, with an average age of 22.3 yews) was selected. The dental models of each of the subjects were scanned three-dimensionally by a laser scanner, and measurements drawn from these were made on the scanned dental casts of the subjects were input into the computer program. From this the occlusal plane and the bracket plane were determined. The tooth plane was then constructed to measure the crown inclination on the bracket plane of each tooth. From a practical standpoint, information was obtained on the extent to which the torque of a tooth would be changed as the bracket position was to be moved vertically (in ${\pm}0.5mm,\;{\pm}1.0mm,\;{\pm}1.5mm$) from its ideal position. A one way analysis of the variance (ANOVA) was used to compare each group of the different vertical distances from the bracket plane on a specific tooth. Duncan's multiple comparison test was then performed. There were statistically significant differences in the crown inclination among the groups of different vertical distances for the upper central incisor, upper lateral incisor, upper canine, upper first and second molars, lower first and second premolars, and lower first and second molars (p<0.05). On the upper anterior teeth, upper molars, lower premolars and lower molars, the resultant torque values due to the vertical displacement of the bracket were different depending on the direction of the displacement, occlusal or gingival. This study implies that the torque of these teeth should be handled carefully during the orthodontic treatment. In circumstances in which the bracket must be positioned more gingivally or occlusally due to various reasons, it would be useful to provide the chart of torque alteration of each tooth referred to in this study with its specified bracket prescription.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.1
• /
• pp.41-50
• /
• 2011

The gingival zenith is the most apical point of the gingival outline. This study aimed to quantify the mesio-distal and apico-coronal displacements of gingival zenith in maxillary anterior dentition. 50 healthy patients, who ranged in age from 25 to 36 years were recruited for the study. Alginate impressions of the study group were made and poured with the type III stone. The gingival zenith positions of maxillary anterior teeth were measured in a mesial-lateral direction from the vertical bisected midline. The apico-coronal displacements of the gingival zenith of lateral incisors were measured from a line joining the gingival zeniths of the central incisor and canine. The gingival zeniths were distally displaced in 90%, 53% and 23% of the maxillary cetral incisors, lateral incisors and canines respectively. The mean distal displacements of the gingival zeniths to the vertical bisected midline of central incisors, lateral incisors and canines were 0.90 mm, 0.29 mm and 0.06 mm respectively. The gingival zeniths of lateral incisors were positioned $0.73{\pm}0.43$ mm coronally to the line joining the gingival zenith of central incisors and canines. Consideration of these findings may improve restorative procedures in the anterior maxillary dentition.