• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.321-322
• /
• 2011

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.4
• /
• pp.17-22
• /
• 2003

This paper presents a new circular curve fitting approach of articulated manipulators, based on least square. The approach aims at gaining the interpolation of circle from n data points, under the condition that the fitted circle should pass both a starting point and an ending point. First a spherical fitting should be performed, using least squares. Then the circular curve fitting can be resulted from the intersection of the fitted sphere and the plane obtained from 3 points, i. e., a starting point, an ending point and the center of a sphere. The proposed algorithms are shown to be efficient by using MATLAB-based simulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.570-575
• /
• 2002

This paper presents a new circular curve fitting approach of articulated manipulators, based on pseudoinverses. The paper aims at gaining the interpolation of circle from n data points, under the condition that the fitted circle should pass both a start point and an end point. In this paper, two algorithms of circular interpolation are presented. Prior to circular interpolation, are a spherical fitting should be performed, using least squares. In the first algorithm, the relationship between point data and normal vector on the sphere is used. In the second algorithm. the equation of plane which can be obtained from 3 points, i.e., a start point, an end point, and center of a sphere. The proposed algorithms are show to be efficient by using MATLAB-based simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.481-488
• /
• 2000

This paper presents a new passive gravity -compensating system for articulated robot manipulators. The system, which consists of linear zero- free -length springs, achieves exact counterbalancing o f the gravitational loads throughout the entire range of the manipulator workspace, A basic concept is to design springs such that the total potential energy of the system including the manipulator and the springs should be maintained constant. A prototype has been developed for a direct-drive five-bar manipulator and its performances have been investigated. Results show that the gravity-induced motor torques have been reduced to less than 5% of those of uncompensated robots. Also, the gravity-compensating system simplifies the position control algorithm while maintaining the trajectory-tracking errors in a satisfactory level. In conclusion, the proposed system efficiently improves the manipulator performances by reducing the driving motor size and the energy consumption as well as by simplifying the control systems.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1252-1264
• /
• 1988

Recently industrial robots together with positioners are often used to enhance the system performance for arc welding. In this paper, a redundancy control method is proposed to the robot-positioner system with seven degrees of freedom, where one kinematic modelling technique is employed. Also, manipulability in the given cutting plane of the workspace. An algorithm maximizing the manipulability is applied to the robot and the positioner and the simulation results are shown for the task following a linear path.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.109-115
• /
• 2019

In arc-welding applying to the present automobile part manufacturing process, a wrist-hollow type arc welding robot can shorten the welding cycle time, because feedability of a welding wire is not affected by a robot posture and thus facilitates high-quality arc welding, based on stable feeding with no entanglement. In this paper, we will propose the optimization of wrist design for a wrist-hollow type 6-Axis articulated robot. Specifically, we will perform the investigation on the optimized design of inner diameter of hollow arms (Axis 4 and Axis 6) and width of the upper arm by using the simulation of robot motion characteristics, using a Genetic Algorithm (i.e., GA). Our simulations are based on $SolidWorks^{(R)}$ for robot modeling, $MATLAB^{(R)}$ for GA optimization, and $RecurDyn^{(R)}$ for analyzing dynamic characteristics of a robot. Especially $RecurDyn^{(R)}$ is incorporated in the GA module of $MATLAB^{(R)}$ for the optimization process. The results of the simulations will be verified by using $RecurDyn^{(R)}$ to show that the driving torque of each axis of the writs-hollow 6-axis robot with the optimized wrist design should be smaller than the rated output torque of each joint servomotor. Our paper will be a guide for improving the wrist-hollow design by optimizing the wrist shape at a detail design stage when the driving torque of each joint for the wrist-hollow 6-axis robot (to being developed) is not matched with the servomotor specifications.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.165-170
• /
• 2000

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, in the synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed for a hierachical control structure consisting of basic level and high level that modify control rules.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.3
• /
• pp.318-324
• /
• 2014

Recent years have witnessed a growing demand for a wide variety of high-performance industrial robots. In this paper, for accurate gain tuning of a 6-axis articulated industrial robot with reduced noise, a program routine for a dynamic signal analyzer (DSA) using the frequency response method will be programmed using $LabVIEW^{(R)}$. Then, robot transfer functions can be obtained experimentally using the frequency response method with the DSA program. Data from the robot transfer functions are transformed into Bode plots, based on which an optimal gain tuning will be executed. Gain tuning can enhance the response quality of the output signal for a given input signal during real-time control of the robot. The effectiveness of our proposed technique will be verified by implementation with a (lab-manufactured) 6-axis articulated industrial robot (hereinafter called "RS2") and comparison with the zero position gain tuning, as well as other positions.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.1
• /
• pp.10-17
• /
• 2016

In general, articulated robot control technology is limited to the design of robot arm control systems considering each joint of the robot joint as a simple servomechanism. This method describes the varying dynamics of a manipulator inadequately because it neglects the motion and configuration of the whole arm mechanism. The changes of the parameters in the controlled system are significant enough to render conventional feedback control strategies ineffective. This basic control system enables a manipulator to perform simple positioning tasks such as in the pock and place operation. However, joint controllers are severely limited in precise tracking of fast trajectories and sustaining desirable dynamic performance for variations of payload and parameter uncertainties. In many servo control applications the linear control scheme proposes unsatisfactory, therefore, a need for nonlinear techniques that increasing. for Forging process automation.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.1
• /
• pp.34-48
• /
• 2017

This study proposes a new approach to control a trajectory control of vertical type articulated robot arm with six revolution joints by computed torque method for manufacturing process automation. The proposed control scheme takes advantage of the properties of the fuzzy controllers. The proposed method is suitable to control of the trajectory and path control in cartesian space for vertical type articulated robot manipulator for forging manufacturing process automation. The results is illustrated that the proposed fuzzy computed torque controller is more stable and robust than the conventional computed torque controller. This study is included with an analytical methodology of inverse kinematic computation for 6 DOF manipulators. And an intelligent PID based on feed forward fuzzy control structure is applied to control the working path control with disturbances caused by uncertainty parameters of the manipulator dynamic model. Lastly, the validity of proposed is verified by simulations and experiments.