• Spatial Information Research
• /
• v.16 no.3
• /
• pp.331-342
• /
• 2008

The countries are trying to expand the sea limit such as the territorial sea, fishing zone or the exclusive economic zone as far as the Law of the Sea permit to do for the benefit of their national interest. Especially, they are eager to claim the base point where it locates far from the coastline even if it is uninhabited island or reef under the sea. The baseline has been claimed to maximize the territorial sea. Another way to expand the sea limit is to lower the vertical datum to change the land limit. China claimed Dongdo which is located about 79 miles far from the coast as the base point. Japan also claimed many uninhabited island or the reef which is located very far from the coast such as Okino Dorishima. As Korea is the party who negotiate the maritime limit with Japan and China, we should be keen and sensitive on the issues claimed by neighboring countries in terms of base point and the baseline. This paper is to review the characteristics of the base points or baselines of neighboring countries and to suggest the views how to maintain and to relocate our base points. As western coast of Korean peninsula is one of the largest tide fluctuation zone in the world, with long tidal record to prove the vertical datum adjustment, Korea can find the way to lower the vertical datum especially in Yellow Sea. So, major and critical tidal station has to be set up along the western coast to verify tide fluctuation record which can be met with international standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.3B
• /
• pp.273-279
• /
• 2001

본 논문에서는 LCD MW를 이용한 각다중화 시스템에서 인접한 수직방향 MW사이에서 발생하는 영상누화현상에 대해 분석하였다. LCD MW를 이용한 각다중화 방법으로 LCD 상에서 수평, 수직방향으로 움직이는 각 창들을 통과한 기준빔이 서로 다른 파벡트로 입사되기 때문에 이러한 창들의 전자적인 제어만으로 효과적인 각다중화된 홀로그램을 얻을 수 있다. 그러나, 수직방향으로 인접한 MW 사이에서 영상누화가 발생하기 때문에 공간적으로 고밀도의 정보저장 및 복원이 제한되고 있다. 따라서, 본 논문에서는 고밀도의 정보저장을 위해 여러 가지 요소들에 의한 영상누화를 이론적으로 분석하고 이에 대한 광학 실험 결과를 제시하였다.

• Journal of KSNVE
• /
• v.10 no.4
• /
• pp.623-628
• /
• 2000

This paper presents the automatic plumbness measuring system form improving the accuracy and working time for plumbness measuring of semi-umbrella type hydraulic turbine generator. It is general practice that rotating shaft should run within acceptable vibration limit. In order to obtain more accurate measuring data for single stage shaft on the semi-umbrella type, plumbness approach must be established carefully and accurately. Generally, present plumbness procedure is required several calculation algorithm, laser sensor and data acquisition devices. As a result of application to actual new system it is confirmed that working time could be saved over 80% and accurate measurement data could be acquired.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.5
• /
• pp.466-477
• /
• 1987

본 논문에서는 NTSC칼라 TV합성신호를 프레임내에서 색도신호와 명도신호성분으로 분리하기 위한 두 종류의 적응 필터링 방식을 제시하였다. 적응 필터링 방식에 있어서 합성신호는 수직필터와 수평필터에 의하여 필터링 되어 지고 화상의 국부적인 특성에 따라 필터의 출력이 선택되어 진다. 첫번째 방식에서는 조건형 스위칭 알고리즘에 의하여 수직필터 또는 수평필터의 출력이 최종단의 출력으로 결정되어 진다. 두번째 방식에서는 선형 조합 검출 알고리즘에 의하여 수직필터와 수평필터의 출력의 가중치합이 최종단의 출력이 된다. 사용된 필터들은 NTSC 칼라 TV 합성신호를 4fsc로 샘플한 경우에 대하여 설계되어졌다. 몇가지 정량적인 기준을 이용하여 여러가지 방식들을 컴퓨터 시뮬레이션에 의하여 비교평가하였다.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2017

Displacement of dams by various instrumentations has been monitored for its safety management and analyzing the behavior after a dam collapse accident. However, unknown displacement of dam has frequently been occurred and it's difficult to analyze behavior of dams more accurately. In this study, improvement of reliabilities for displacement of dams measured by a total station was suggested by calibrating the monitoring system. The position of total station was initially measured through 2-3 given points and the coordinate of the total station was considered as an absolute value. Also, base horizontal and vertical angles had not been considered even if they are important factors when displacement was estimated. In this study, location of the total station and variations of base horizontal and vertical angles were investigated during measuring displacements of targeting points. From the results of this study, they are important factors which are affecting measurements of dam displacements. Before the calibrating, the displacement at 50 m from total station was ${\pm}20mm$. After the calibrating, the displacement was decreased by ${\pm}5mm$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.215-221
• /
• 2015

Treating patients with severely worn dentition often requires comprehensive prosthetic treatments. Oral rehabilitation and long-term stability could be achieved by analyzing the cause of the wear and changing vertical dimension. The temporary restoration procedure is executed and patient's adaptation is evaluated by long-term observation when treatment is accompanied with increasing vertical dimension. In this case, 54 year-old male presented with worn dentition and esthetic dissatisfaction. In oral manifestations, severely worn dentition with attrition and erosion is diagnosed. To evaluate change of vertical dimension, interocclusal rest space, facial appearance, pronunciation, clinical crown length, distance from incisor edge to labial vestibule are evaluated. Consequently, 2.5 mm increase of vertical dimension that based on articulator incisal pin is determined. After 8 weeks stabilization period with temporary prostheses, definitive prostheses are fabricated. After 6 months follow up period, satisfactory outcomes were achieved both in functional and esthetic aspects through this procedure.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.40-51
• /
• 2021

In this paper, the design requirements was produced by analyzing domestic and foreign regulations of the vertical takeoff and landing site required to operate the urban air mobility (UAM) system in Korea and the size of the take-off and landing pads were defined, and the configuration of vertiport was proposed. First, for the metropolitan area with high population density, pilot locations of the vertical take-off and landing site were selected based on the demonstration routes suggested by the Ministry of Land, Infrastructure and Transport and analyzed the characteristics of each location and determined the number of possible installations of vertiport by measuring each site. After that, variables necessary for the operation of the vertical takeoff and landing area were set, and the hourly, daily, monthly aircraft operating cycle, the number of acceptable people, and efficiency were calculated according to the number of simultaneous operation and the number of stand. Finally, using CATIA, the configurations of the virtual vertiport was created by applying the design requirements.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.451-463
• /
• 2007

This paper describes issues of GPS network adjustment to determine coordinate sets of the $2^{nd}$ order national geodetic control points based on the Korean Geodetic Datum (KGD2002) which has been newly adopted in 2003, After outlining theoretical background of the GPS network processing, the adjustment procedure applied for this project is detailed. Throughout performing a series of minimally constrained adjustments, some outliers have been removed and magnitude of absolute and relative error for a stochastic modeling has been determined as 4mm+0.4ppm and 8mm+0.8ppm in the horizontal and vertical component, respectively. The over constrained adjustment by fixing the $1^{st}$ order control points was performed to derive final solution, indicating that the accuracy of the estimated coordinates was 2cm and 4cm in the horizontal and vertical component.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.95-96
• /
• 2018

허리는 등부터 엉덩이 사이의 잘록한 부분을 뜻하며 상체와 하체를 구분하는 기준이 되기도 한다. 본 논문에서는 허리의 Flexion과 Extension에 대해 다루도록 한다. Flexion은 몸통의 수직선을 축으로 앞으로 몸을 구부리는 덧을 말한다. 이때 구부리는 각은 70~80도의 움직임이 기준이다. 이보다 크거나 적고 고통을 동반하면 이상이 있는 것이다. Extension은 엉덩관절을 고정한 채 몸을 뒤로 구부리는 것이다. 이때 각도는 25~35도 정도이다. 이보다 크거나 적고 고통을 동한하면 이상이 있는 것이다. 실험을 통하여 50대 사람들의 Flexion과 Extension의 이상 여부를 알아보았다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.272-273
• /
• 2010

본 연구에서는 NOAA에서 발간된 자료와 ICSM에서 발간한 자료를 토대로 조위관측의 정확도를 검토한 결과 최소 3개월, 또는 1년 이상의 장기관측을 하는 방안이 권장되며 NOS에서 공식적으로 인정된 19년 주기의 관측에 의한 국가기준(시기)을 정할 필요가 있음을 제시하고 있다.