• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2374-2382
• /
• 2002

Aluminum alloy/aramid fiber reinforced plastic(Al/AFRP) laminates consists of high strength metal(A15052) and laminated aramid fiber with structural adhesive bond. The mixture ratio effect of epoxy resin curing agent accelerator on the tensile strength and T-peel strength characteristic in Al AFRP laminates were investigated in this study. The epoxy. diglycidylether of bisphenol A(DCEBA), It'as cured by methylene dianiline(MDA) with or without an accelerator(K-54). Eight different kinds of resin mixture ratios were selected for the test , five kinds of Al/AFRP laminates were named as Al/AFRP(1) and three others of Al/AFRP laminates were named as Al/AFRP(2). The comparison of tensile strength and T-peel strength with variation of resin mixture ratio were studied. Respectively. Al/AFRP(1) and Al/AFRP(2) indicated approximately 6.0 times and 7.0 times more improved maximum tensile strength in comparison with those of monolithic A15052. Al/AFRP(2) indicated approximately 1.5 times more impoved maximum T-peel strengths in comparison with those of Al/AFRP(1). As results. Al/AFRP(2) turned out to have more effective characteristics on the tensile strength and T-peel strength than those of Al/AFRP(1).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.90-90
• /
• 2010

Cycloaliphatic Epoxy와 Bisphenol Epoxy를 각각 mol-wt%비 (80:20, 50:50, 20:80)로 혼합하고 Epoxy Silaned Silica, 바ed Silica, Spherical Silica, ATH(Aluminum Trihydrate)를 충진하여 내트래킹 특성 및 인장강도, 충격강도 등의 기계적 강도를 비교하였다. Cycloaliphatic 수지는 Huntsman사(社)의 CY5622, Bisphenol 수지는 Hexion사(社)E의 Epikote2200을 사용하였으며, Silaned Silica 및 Fused Silica는 Quatzwerke사(社)의 W12, FW12를 사용하였다. 전체 혼합물 중, 에폭시는 약 36%, 실리카는 약 34~540%, ATH는 약 10~30% 이다. 실험결과, ATH 함량이 높은 조성 및 Epoxy Silaned Silica를 사용한 조성과 Cycloaliphatic 혼합비율이 높은 조성이 우수한 내트래킹 특성을 보였다. 또한, Silica의 함량이 증가할수록 기계적 강도가 증가하였으며, Silaned Silica를 사용하였을 때 가장 우수한 특성을 나타내었다. 본 실험의 결과를 통해 옥외용 내트래킹 특성 규격인 IEC60587 4.5kV/6h를 만족하는 조성에 대해 가늠이 가능하였고, 각 조성에 따른 기계적 강도의 확인이 가능하였다.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.452-457
• /
• 2015

The physical properties, such as the heat resistance and thermal durability of the temperature difference fatigue resistance should be excellent when preparing an epoxy type resin for a neon transformer housing. In this study, 50 wt% of $SiO_2$ and silica were selected as a reinforcement and diluent filler for epoxy type resins, respectively. Thermal conductivity and thermal stability were measured as the mixing ratio varied upon the particle sizes. The optimal amount of the mixed silica was 50 wt%. Thermal stability was improved with increasing the amount of larger silica particles. The optimal mixing ratio of differently sized silica particles was 28/3 : 14/18 : 8/10 mesh = 1 : 1 : 1. From these results, it is thought that neon transformer is producible which has excellent thermal durability.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.131-139
• /
• 2012

The exothermic cure kinetics of epoxy resin was controlled by hardener containing fast and slow curing agents. The epoxy risen comprises hydrogenated bisphenol A-based epoxide (HBA), fast curing agent (FH) and slow curing agent poly(propyleneglycol)bis(2-aminopropylether) (SH). Talc was used as an inorganic additive. In the process of curing, cure kinetics along with temperature was monitored by differential scanning calorimeter (DSC) and thermocouple to show that the temperature increase was well controlled by adjusting the hardener mixture. Additionally, bending and tensile strengths of the epoxy/talc composites were also measured to be lower and higher with the amount of the talc inorganic additive, respectively. It is thus concluded that the increase in the temperature during exothermic curing reaction and mechanical properties of epoxy resins are tuned by optimizing hardener mixture for successful stone conservation.

• The Korean Journal of Rheology
• /
• v.2 no.2
• /
• pp.56-65
• /
• 1990

열방성 액정고분자와 폴리카보네이트를 대상 수지로 하여 용융혼합기로 액정고분자 의 함량, 혼합속도 및 온도등의 변환에 따른 훈련 특성을 측정하고 고분자 혼합물의 혼련조 건과 유변학적 특성 모폴로지 사이의 관계를 조사하였다. 혼련 토크는 100rpm의 혼합속도 에서 극소값을 보이며 혼합기 내의 전단속도가 낮기 때문에 혼력에의해서는 LCP가 섬유상 으로 형성되지 못하고 구형의 입자로 존재함을 알수 있었다. 혼합물의 점도는 시험된 전단 속도 영역에서 순수한 고분자보다 현저히 낮으며 5wt%의 소량 첨가로도 5배의 점도 감소 효과를 보이고 LCP함량이 약 30wt%일 경우 점도 및 혼합에너지가 최소로 되었다. Capillary 레오미터의 실험결과 LCP/PC의 점도비가 1보다 작거나 같튼 전단장하에서 LCP 는 섬유상을 형성하였으며 높은 점도비의 경우 LCP의 변형이 어려워 구형의 입자로 존재하 였다. 또한 혼합물의 PC Tg 이동은 에스터르 교환 반응에 의한 부분적인 혼화성의 증가에 기인함을 알수 있었다.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.439-450
• /
• 2009

The purpose of this study is to find out characteristics of the fillers made by epoxy resin (L-30) and filling epoxy resin (L-50) with talc, quartz sand and wollastonite with different mixture ratio of 5%, 50%, 80%, 120%, and 150%. The viscometer and colorimeter were used to measure the viscosity and chromaticity of the fillers. Additionally, IC and SEM were used to reveal characteristics of the filler, and checked ultrasonic wave velocity, compressive strength and contact angle to estimate the stability between the filler and stones which are essential for conservation treatments. The filler mixed with the talc had the lowest value in the ultrasonic wave velocity analysis, and its compressive strength decreased as the mixing rate of talc increased. On the other hand, wollastonite had higher values than others in the ultrasonic wave velocity and the compressive strength regardless of epoxy resin type, also, these values increased as mixing rate increased. The properties of the filler, which include the granularity and shape, have influence on characteristics of the stone conservation adhesives. Thus, the filler type, characteristic, and mixture ratio must be considered for effective conservation treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.50-61
• /
• 1988

접착제(接着劑) 제조(製造)를 위하여 펄프폐액(廢液)중의 리그닌을 이용(利用)하는 연구(硏究)가 1930년경(年傾)부터 진행(進行)되여 아황산펄프폐액(廢液)중의 Lignosulfonate의 경우는 페놀수지(樹脂)나 요소수지(要素樹脂)에 증량(增量)시키거난 반응(反應)시키는 연구(硏究)인데 비하여 kraft 리그닌을 이용(利用)하는 경우는 페놀수지(樹脂)의 보문(報文)이 주류(主流)를 이루고 있으나 요소계(要素系) 공축합수지(共縮合樹脂)는 아직 발표(發表)된 바 없으며 또한 아직까지 리그닌을 이용(利用)한 상업적(商業的)인 접착제(接着劑)가 제조(製造)되어 활용(活用)되지 못하고 있는 실정(實情)이다. 따라서 본(本) 연구(硏究)는 합판제조(合板製造)의 원가절감(原價節減), 폐액이용(廢液利用)의 환경보존관점(環境保存觀點)에서 Krfat Pulp 폐액(廢液)중의 리그닌접착제(接着劑)의 제조(製造)하고져 실시(實施)하였으며, Urea-Lignin 접착제(接着劑)의 도포량(塗布量)은 일반적(一般的)으로 합판(合板)에 도포(塗布)되는 요소수지(要素樹脂)의 량(量)(320g/$m^2$)과 동일(同一)하고 압축응력(壓縮應力)은 균일(均一)하게 12kg/$cm^2$으로 하여 열압조건(熱壓條件)(온도(溫度), 시간(時間))의 영향(影響))을 아울러 규명(糾明)하였다. Urea-Formaldehyde와 Kraft lignin의 혼합비(混合比)는 중량비(重量比)(N.V.C)로 7:3으로 합성수지(合成樹脂)를 만들어 합판제조(合板製造)를 통(通)하여 구명(究明)를 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1. 본(本) 실험(實驗)의 결과(結果) 요소수지(要素樹脂)의 약(約) 30%가 krfat lignin으로 대체(代替)할 수 있음을 보여준 바, Pulping 공정(工程)의 부산물(副産物)로 얻어진 폐액(廢液)은 합판제조시(合板製造時) 접착제(接着劑)의 대체원(代替源)으로 유효(有效)하다. 2. 경제적관점(經濟的觀點)에서 합판제조(合板製造)를 위한 최적열압조건(最適熱壓條件)은 $160^{\circ}C$에서 3분(分)으로 압착(壓搾)하는 것이 적절(適切)하였다.(상태(常態)): 16.49kg/$cm^2$, 내수(耐水) : 18.56kg/$cm^2$, 내온수(內溫水) : 12.53kg/$cm^2$). 3. 요소-리그닌 접착제(接着劑)로 제조(製造)된 합판(合板)의 전단인장강도(剪斷引長强度)는 양호(良好)한 접착력(接着力)을 나타냈으며, 내수접착력(耐水接着力)($30^{\circ}C$에서 3시간(時間) 심적후(沈積後) 시험(試驗)은 상태접착력(狀態接着力)과 별차이가 없거나 더 높은 인장강도력(引長强度力)을 보여준 바, 내수합판용(耐水合板用) 접착제(接着劑)로 상당한 전망(展望)을 나타냈다.

• Composites Research
• /
• v.24 no.5
• /
• pp.34-38
• /
• 2011

Carbon nanotubes (CNTs) have been widely investigated as reinforcements of CNT/polymer nanocomposites to enhance mechanical and electrical properties of polymer matrices since their discovery in the early 90's. Furthermore, the number of studies about incorporating CNTs into carbon fiber reinforced plastics (CFRP) to reinforce their polymer matrices is increasing recently. In this study, single-walled carbon nanotubes (SWNT) were dispersed in epoxy with 0.2 wt.% and 0.5 wt.%. Then, the SWNT/epoxy mixtures were processed to carbon fiber composites by a vacuum assisted resin transfer molding (VARTM) and a wet lay up method. The processed composite samples were tested for the interlaminar shear strength (ILSS). The relationship between the interlaminar shear strengths and processing, and the reinforcement mechanism of carbon nanotubes were investigated. CNT/epoxy nanocomposite specimens showed the increased tensile properties. However, the ILSS of carbon fiber composites was not enhanced by reinforcing the matrix with CNTs because of processing issues caused by increased viscosity of the matrix due to addition of CNTs particularly for a VARTM method.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.218-224
• /
• 1999

Continuous ion exchange characteristics of the synthetic coolant contained Ni, Co and Ag ions of low concentration in acidic-oxidizing conditions have been studied to suggest the guideline for the optimum operation of mixed-bed demincralizer during the shutdown period of a pressurized water reactor (PWR). In the effect of the form of cation resins on the removal capacity of metal ions, the performance of a $H^+$-form resin was about 6% higher than that of a $Li^+$-form resin. Mixed-bed of cation and anion resins in comparison with nonmixed-bed of them, had no affected on the removal capacity of metal ions but very slightly increased the slope of breakthrough curves of metal ions. In the effect related to acidic-oxidizing conditions of the coolant, the addition of boric acid very slightly decreased the slope of breakthrough curves of metal ions, while the addition of hydrogen peroxide slightly decreased the removal capacity of metal ions.

• Journal of Korea Foresty Energy
• /
• v.24 no.1
• /
• pp.28-32
• /
• 2005

This study was performed to find a new use of wood tar from the manufacturing process of wood charcoal. Plywoods made of phenol adhesives mixed with wood tar were manufactured, and physical, mechanical properties and formaldehyde emission were investigated. Plywoods made of phenol adhesives mixed with wood tar were almost same as an original phenol adhesive in physical and mechanical properties and tensile-shear adhesive strength of the plywood was higher than the original one in both non-waterproof and waterproof tests. Formaldehyde emission was lower as the amount of wood tar increased in phenol adhesive.