Browse > Article
http://dx.doi.org/10.14478/ace.2015.1053

Thermal Durability of Neon Transformer with Diluent Mixing Ratio  

Hong, In Kwon (Department of Chemical Engineering, Dankook University)
Jeon, Gil Song (Department of Chemical Engineering, Dankook University)
Lee, Seung Bum (Department of Chemical Engineering, Dankook University)
Publication Information
Applied Chemistry for Engineering / v.26, no.4, 2015 , pp. 452-457 More about this Journal
Abstract
The physical properties, such as the heat resistance and thermal durability of the temperature difference fatigue resistance should be excellent when preparing an epoxy type resin for a neon transformer housing. In this study, 50 wt% of $SiO_2$ and silica were selected as a reinforcement and diluent filler for epoxy type resins, respectively. Thermal conductivity and thermal stability were measured as the mixing ratio varied upon the particle sizes. The optimal amount of the mixed silica was 50 wt%. Thermal stability was improved with increasing the amount of larger silica particles. The optimal mixing ratio of differently sized silica particles was 28/3 : 14/18 : 8/10 mesh = 1 : 1 : 1. From these results, it is thought that neon transformer is producible which has excellent thermal durability.
Keywords
neon transformer; epoxy type resin; thermal stability; diluent filler; mixing ratio;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 C. A. May, Epoxy Resins Chemistry and Technology, Marcel Dekker Inc., NY (1988).
2 W. Yasuo, T. Takeshj, H. Takashi, and H. Takashi, Development of outdoor epoxy resin molded apparatus for distribution systems, IEEE Trans. Power Deliv., 5(1), 204-211 (1990).
3 L. W. Pierce, An investigation of the temperature distribution in cast-resin transformer windings, IEEE Trans. Power Deliv., 7(2), 920-926 (1992).   DOI   ScienceOn
4 R. S. Bauer, Epoxy Resin Chemistry, American Chemical Society, Washington D. C. (1979).
5 S. J. Park, F. L. Jin, and J. S. Shin, Physicochemical and mechanical interfacial properties of trifluorometryl groups containing epoxy resin cured with amine, Mater. Sci. Eng: A, 390, 240-245 (2005).   DOI
6 S. G. Hong and J. S. Tsai, The effect of metal surfaces on the adsorption and degradation behavior of an epoxy/amidoamine system, Macromol. Mater. Eng., 276, 59-65 (2000).
7 S. J. Park and F. L. Jin, Thermal stabilities and dynamic mechanical properties of sulfone-containing epoxy resin cured with anhydride, Polym. Degrad. Stab., 86, 515-520 (2004).   DOI   ScienceOn
8 J. Froflich, D. Golombowski, R. Thomann, and R. Mulhaupt, Synthesis and characterisation of anhydride-cured epoxy nanocomposites containing layered silicates modified with phenolic alkylimidazolineamide cations, Macromol. Mater. Eng., 289(1), 13-19 (2004).   DOI   ScienceOn
9 R. Byron Bird, Warren E. Stewart, Edwin N. Lightfoot, Transport Phenomena, 2nd ed., Wiley (2002).
10 S. J. Park, F. L. Jin, and J. R. Lee, Synthesis and Thermal Properties of Epoxidized Vegetable Oil, Macromol. Rapid Commun., 25(6), 724-727 (2004).   DOI   ScienceOn
11 C. H. Lee, Handbook of Epoxy formulation, Kyowoosa, Seoul (2009).
12 S. B. Lee and I. K. Hong, Thermal deformation of epoxy type resin for neon transformer housing, J. Ind. Eng. Chem., 17(3), 404-409 (2011).   DOI   ScienceOn
13 S. B. Lee, H. J. Lee, and I. K. Hong, Diluent filler particle size effect for thermal stability of epoxy type resin, J. Ind. Eng. Chem., 18(2), 635-641 (2012).   DOI   ScienceOn
14 W. L. McCabe, J. C. Smith, and P. Harriott, Unit Operations of Chemical Engineering, 7th ed., 251-258, McGraw-Hill (2005).
15 S. B. Lee, Y. S. Yoon, and I. K. Hong, Selection of thinner for epoxy type resins for neon transformer housing, J. Ind. Eng. Chem., 18(5), 1997-2003 (2012).   DOI   ScienceOn