• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.364-364
• /
• 2022

최근 기후변화에 따른 잦은 이상 가뭄으로 물 부족 현상이 심화되고 있어 물 안보가 중요한 사회적 이슈로 부각되고 있다. 물 부족에 대비하기 위해 수자원은 인류가 마음대로 사용할 수 있는 자유재가 아니라 보호·관리하여야 하는 대상으로, 보유한 미사용량을 회수·재배분하여 물 이용의 공정성을 강화 등 물 이용 제도의 전반에 대한 검토·개선이 필요한 실정이다. 하지만 일부 유역에서는 하천수 사용량이 정확하게 계측되지 않아 공정한 하천수 배분 등에 한계가 발생하고 있다. 본 연구에서는 충주댐 하류 유역에 위치한 자동유량측정소 원주시(남한강대교)와 여주시(남한강교) 상·하류 유량자료를 검토·분석하여 하천수 사용허가권에 등재된 하천수 이용량을 검토하고자 한다. 아울러 상·하류 자동유량관측소 내 지류 하천(섬강, 청미천)이 유입되고 있어, 추가 유입량을 고려한 물수지 분석을 위해 원주시(문막교)수위관측소, 여주시(원부교)수위관측소의 유량자료를 이용하였다. 상·하류 유량자료 검토 결과, 지류 유입량 + 하류 여주시(남한강교)) 유량이 상류 원주시(남한강대교) 유량보다 작은 상·하류 유량이 역전('19~'20, 평균 787,753m³/day)되는 흐름이 발생하였다. 구간 내 등재된 취수시설물(11개소) 허가량(39.66×10⁶m³) 보다 실재 사용량은 많을 것으로 추정되며 상·하류 역전 흐름에 직접적인 영향을 준 것으로 판단된다, 또한 현장 조사에서 허가대장에 미등재된 다수의 시설을 발견하였으며 이는 하천수의 효율적인 관리에 장애요인으로 작용된다. 하천수 사용은 복합허가사항으로 홍수통제소에서 사용허가부터 관리까지 실시하고 있는데 하천수 허가 신청량은 계획수요량 산정과 물수지 분석결과를 통하여 적정성 검토가 이루어지고 있다. 그러나 하천수 사용허가량 대비 실제 하천수 취수량이 얼마나 되는지 파악은 불가능한 실정이다. 결국 하천 유량을 관리하기 위해 강수량, 수위, 유량 등 많은 수문요소를 정확하게 측정하는 것도 필요하지만 이처럼 하천수 이용을 위해 취수되는 양을 정확하게 계측하지 않는다면 효율적인 하천수 관리는 어렵다. 하천수를 관리하고 효율적으로 이용하기 위해 하천수 이용에 대한 제도적인 보완이 필요해 보인다.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.52-54
• /
• 2002

본 연구는 고특성 소결자석 제조용 strip-cast 합금을 개발하기 위한 기초단계 연구로서 파양한 조건을 통해 strip-cast 합금을 제조한 후, 제조조건이 합금의 미세조직 형성에 미치는 영향을 조사하였다. 조성이 Nd/sub 15/Fe/sub 77/B/sub 8/인 strip-cast 합금을 다양한 방법으로 제조한 결과, wheel speed 즉, 냉각속도가 5 m/s 이하에서 strip 표면에 수직한 방향으로 수지상정이 잘 발달한 것을 발견하였으나, 그 이상의 냉각속도에서는 수지상정이 붕괴되며 미세한 결정질로만 구성된 것으로 관찰되었다. 따라서 잘 발달된 수지상정을 얻기 위해서는 냉각속도를 5 m/s로 유지해야 함을 알 수 있었다 이 때 수지상정간 간격은 약 4-7㎛로써 고특성 소결자석의 기준에 잘 부합되었다. 한편 XRD 분석결과, 냉각속도 5 m/s이하에서는 <001> 방향으로 뚜렷하게 preferred orientation이 일어난 것을 확인하였으며, 이것은 strip 합금의 분쇄 및 소결시에 결정립 배향성에 유리하게 작용하여 최종 소결자석의 자기적 특성 향상에 기여할 것으로 예상된다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.05a
• /
• pp.261-262
• /
• 2016

• Journal of Conservation Science
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2000

In 1993, many bronze artifacts were excavated from the Sanoesa Temple(思惱寺), Chongju, Chungbuk. Twelve items were selected and chemically analyzed with AA Spectrometry and ICP-Atomic Emission Spectrometry. They were also observed under the optical microscopy and SEM. According to the results from chemical analysis, production method and use, these artifacts were classified into four groups: casting, wrought and welding products, and bells. Cast products, probably used for ritual, were alloy of 70% Cu, 10% Sn and 20% Pb. They showed ${\alpha}+{\beta}$ phase as a typical microstructure of casting. The ${\delta}$ phase was rarely observed due to the small amount of Sn. These artifacts included more lead than other alloys. They showed segregation like island-shape on the lead part. Wrought products used for daily too1s. were alloy of 80% Cu and 20% Sn. Since they were consist of ${\alpha}$ phase and martensite ${\beta}$ phase, it could be presumed that they were heat-treated. The production method could be identified from twinned grains in ${\alpha}$ phase. Lead was not included in because it had a bad effect to alloy. The bells were alloyed with 85% Cu, 10% Sn, 5% Pb or 90% Cu and 10% Sn. They show the dendrite structure because they were cast and alloyed with many tin. Weldinged were alloyed with 83% Cu, 12% Sn and 5% Pb. lt showed the fine dendrite structure because of fast cooling in air.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.182-189
• /
• 2005

This research was conducted to determine physical properties of four root media, peatmoss + vermiculite (1:1, v/v; PV), peatmoss + composted rice hall (1:1, PR), peatmoss + composted saw-dust (1:1 : PS) and peatmoss + composted pine bark (1:1 PB), as influenced by incorporation rate of Stock-sorb C (STSB). Each root medium containing STSB was packed in 22 cm diameter plastic pot and the physical properties were determined at 5 weeks after packing. As incorporation rate of STSB were elevated, total porosity increased in PV, PS and PB media with statistical differences at $5{\%}$ level. Those also resulted in increase of container capacity in PS and PB media, but statistical differences were not observed in PV and PR media. Elevated incorporation rate of STSB in PV, PS and PB media resulted in increase of air space with statistical differences. Trends in air space of the three root media showed a linear as well as quadratic responses to STSB contents of media. As incorporation rate of STSB increased, more water was retained in four root media at the soil moisture tension of 4.90 kPa, 9.81 kPa, 29.4 kPa and 1.5 MPa. The amount of water retained in PS medium was the highest at the moisture tension at 29.4 kPa and 1.5 MPa followed by PB, PR and PV medium. These results indicated that elevation of incorporation rate of STSB to various root media increased moisture retention capacity, but did not increase the available water holding capacity.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.3
• /
• pp.171-175
• /
• 2011

Lithium secondary batteries using lithium metal count electrode are easy to use and to analyze the specific characteristics of working electrode. Nevertheless, during the charge operation internal electrical short circuit could be caused by the dendritic growth of lithium. The cell failure by the short circuit depends on the condition of separator such as constitutive material and thickness. To prevent the cell failure caused by the dendritic growth of lithium, the electrochemical properties of the cell of lithium metal count electrode were evaluated for four different kinds of separator. Among the tested separators, GMF (glass micro-fiber filter, $300{\mu}m$) was the most promising one because it could effectively prevent the cell failure during the charge. The cell using GMF separator had relatively low impedance. Generally the cell using thicker separator than $50{\mu}m$ could effectively avoid the cell failure by internal short circuit and had the good cycleability. The highest rate capability by the signature method was acquired in the case of GMF separator.

• Journal of Life Science
• /
• v.27 no.4
• /
• pp.482-499
• /
• 2017

Allergic diseases have increased over the past several decade worldwide including developing countries. Allergic inflammatory responses are caused by Th (T helper)2 immune responses, triggered by allergen ingestion by antigen presenting cells such as dendritic cells (DCs). Intestinal microorganisms control the metabolism and physiological functions of the host, contribute to early immune system maturation during the early life, and homeostasis and epithelial integrity during life. Bifidobacteria have strain-specific immunostimulatory properties in the Th1/Th2 balance, inhibit TSLP (thymic stromal lymphopoietin) and IgE expression, and promote Flg (Filaggrin) and FoxP3 (Treg) expression to alleviate allergies. In addition, unmethylated CpG motif ODN (oligodeoxynucleotides) is recognized by TLR (toll-like receptors)9 of B cells and plasmacytoid dendritic cells (pDCs) to induce innate and adaptive immune responses, while the butyrate produced by Clostridium butyricum activates the GPR (G-protein coupled receptors)109a signaling pathway to induce the expression of anti-inflammatory gene of pDCs, and directly stimulates the proliferation of thymically derived regulatory T (tTreg) cells through the activation of GPR43 or inhibits the activity of HADC (histone deacetylase) to differentiate naive $CD4^+$ T cells into pTreg cells through the histone H3 acetylation of Foxp3 gene intronic enhancer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1322-1328
• /
• 2006

In our previous study, a novel herb mixture (HIM-I) of Angelica gigas radix, Cnidium officinale rhizoma, and Paeonia japonica radix was developed to protect= the intestinal and immune systems and to promote their recovery from radiation damage. A new herbal composition (HemoHIM) with the high immune modulating activity was developed from HIM-I. In the present study, we examined the effects of HemoHIM on the maturation process of murine bone marrow (BM)-derived dendritic cells (DC). BM cells were cultured in the presence of iL-4 and GM-CSF and the generated immature DC were stimulated with HemoHIM for 24 hours. HemoHIM significantly enhanced the expression of co-stimulatory molecules, CD80 and CD86, especially. The activation capacity of HemoHIM-treated DC was significantly higher than that of immature DC, as analyzed by IL-2 and $IFN-\gamma$ production and proliferation of the responding T cells in the co-culture with allogeneic T cells. The antigen-presenting capacity of HemoHIN-treated DC was also increased by the co-culture with OVA-specific T cells (HS-1), as analyzed by IL-2 and $IFN-\gamma$ production and the proliferation. These results indicate that HemoHIM causes the maturation and ;Activation of DC, which may be a part of mechanisms of immunomodulation by HemoHIM.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.820-828
• /
• 2000

In this study, biaxially oriented film process was used to improve barrier property of polypropylene (PP)/ethylene-vinyl alcohol copolymer (EVOH) blends by inducing a laminar morphology of the dispersed phase in the matrix phase. In order to examine the extent of deformation during melt extrusion process, the rheological properties of the resins were measured and the viscosity ratio of the dispersed phase to the continuous phase was determined. The effects of compatibilizer content, draw ratio, and draw temperature on the oxygen permeability and morphology of biaxially drawn blend films were studied. The laminar morphology of the EVOH phase with a larger area of thinner layer induced by biaxial orientation was found to result in a significant increase in oxygen barrier property of PP/EVOH (85/15) blends by about 10 times relative to the pure PP When both PP-g-MAH and ionomer were used as the compatibilizers, there existed an optimum level of compatibilizer content for obtaining improved barrier properties with a well developed laminar structure. In addition, higher draw ratio and draw temperature were found to be more favorable processing conditions in obtaining higher barrier blends.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.477-482
• /
• 2002

In order to control the micro-pore structure of glassy carbon (GC), an activation agent of KOH was introduced as the glassy carbon was prepared from phenolic resin with a curing agent of phosphoric acid. The yield and properties of GC were investigated as a function of KOH content. Although the GC produced without KOH had nonporous structure except the trace of bubble formation, the GC with KOH had very porous structure. The surface area of GC with KOH increased continuously up to 870 $m^2$/g with the increase of KOH content. The carbonization yield and apparent density measured in water reduced from 40 to 15% and iron 1.5 to 0.9 g/$cm^3$, respectively, and the electrical resistivity increased from $50{\times}10^{-4}$ to $60{\times}10^{-4}$$\Omega$.cm with the increase of KOH content.