• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.4
• /
• pp.245-251
• /
• 2019

Sonar bearing accuracy is the correspondence between the target orientation predicted by sonar and actual target orientation, and is obtained from measurements. However, when measuring sonar bearing accuracy, many errors are included in the results because they are made at sea, where complex and diverse environmental factors are applied. In particular, parallax error caused by the difference between the position of the GPS receiver and the sonar sensor, and the time delay error generated between the speed of underwater sound waves and the speed of electromagnetic waves in the air have a great influence on the accuracy. Correcting these parallax errors and time delay errors without an automated tool is a laborious task. Therefore, in this study, we propose a sonar bearing accuracy measurement equipment with parallax error and time delay error correction. The tests were carried out through simulation data and real data. As a result of the test it was confirmed that the parallax error and time delay error were systematically corrected so that 51.7% for simulation data and more than 18.5% for real data. The proposed method is expected to improve the efficiency and accuracy of sonar system detection performance verification in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.6
• /
• pp.317-324
• /
• 2005

Detection and localization of a quiet target in shallow water environments is a challenging problem because of the complicated acoustic Propagation and the Prevalence of loud surface ship interference. Matched Field Processing (MFP) can help address the concern by using a Propagation model to determine the steering vectors, thus Providing optimal away gain and localization accuracy. However, Performance of MFP have yet realized in practice, for several reasons. The most important limitation is that precise information on the underwater environments is generally not available. To examine the Performance of MFP in the East Sea of Korea, we have accomplished a series of matched acoustic Properties and localization experiment (MAPLE). We analyzed the array data measured from MAPLE which is accomplished using a vertical line array and a towed acoustic source off the east cost of Korea in Oct. 2003. We localized the acoustic source using MFP. It is well known that the temperature structure in the experimental site is affected by the short period fluctuation such as internal wave. In this paper, it is found that the sidelobe level on the MFP ambiguity surface is increased being affected by the short period fluctuation.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.363-369
• /
• 2015

This paper describes deployment of a sea based sensor platform for the detection of a submarine launched ballistic missile (SLBM). Recently, North Korea successfully conducted the underwater launching test of the SLBM, which will seriously threaten the global security. To defend these threats successfully, a sensor platform of the ballistic missile defense (BMD) should be deployed in the area of high detection probability of the missile. The maximum detection range characteristics of the typical radar sensor system, however, depend on the radar cross section (RCS) and flight trajectories of the target. In this point of view, this work analyzed the flight trajectories based on the tactics and calculated the RCS of the SLBM. In addition, sea based sensor platform position is proposed from the analysis of the detection time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1123-1129
• /
• 2003

The noise of maneuvering submarines or vessels can be divided into the tonal signals and broadband ambient noise. Tonal signals are from the revolution of motors and engines of vessels, and broadband ambient noise is from the bubbles which are generated by the propellers and the flow of water around vessels. We can analyze the kinds and the speed of vessels if we analyze the tonal signals and ambient noise. But, it is difficult to divide the tonal signals form the ambient noise when the power of tonal signal is much weaker than the power of ambient noise. In this paper, we detect the direction of arrival(DOA) of the noises generated by vessels with the automatic tracking window(ATW) preprocessing algorithm, and make a beam to the direction of the targets. We suggest a method which can separate weak tonal signals from broadband ambient noise with the ATW algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.5
• /
• pp.478-484
• /
• 2002

Linear towed arrays (LTA) have a nonlinear shape due to tow vessel motion, ocean swells and currents. By reasons of nominally linear shape, various towed array shape estimation techniques have been developed since the perturbed shape cause the error in target detection. In this paper,, we propose the beamforming method for the perturbed LTA with simple structure. The proposed method linearizes a nonlinear phase of steering vector with position information measured by two reference sensors. It can be proved using some properties of Markov transition matrix, and iteration number of linearization process is decided by variance of cross phase difference. As a result of computer simulation in the ocean environment, beampattern of the proposed method is almost same with the ideal case in my type of array shape. In the signal-to-noise ratio (SNR) performance simlation, the DOA estimation performance of the proposed beamforming method is evaluated, and the comparison with Bartlett beamformer of the LTA shows that the proposed method can estimate. the spatial characteristic of sources more accuracy.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.138-146
• /
• 2013

Passive sonars employ DEMON (Detection of Envelope Modulation on Noise) processing to extract propeller information from the radiated noise of underwater targets. Conventional DEMON processing improves SNR(Signal to Noise Ratio) characteristic by Welch method. The conventional Welch method overlaps several different time domain DEMON outputs to reduce the variance. However, the conventional methods have high computational complexity to get high SNR with correlated acoustic signals. In this paper, we propose new DEMON processing method that divides acoustic signal into several frequency bands before DEMON processing and averages each DEMON outputs. Therefore, the proposed method gathers independent acoustic signal faster than conventional method with low computational complexity. We prove the performance of the proposed method with mathematical analysis and computer simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.12-22
• /
• 2017

It is important to predict accurately reverberation level, which is a limiting factor in underwater target detection. Recently, the studies have been expanded from monostatic sonar to bistatic sonar in which source and receivers are separated. To simulate the bistatic reverberation level, the computation processes for propagation, scattering strength, and scattering cross section are different from those in monostatic case and more complex computation processes are required. Although there have been many researches for bistatic reverberation, few studies have assessed the bistatic scattering cross section which is a key factor in simulate reverberation level. In this paper, a new method to estimate the bistatic scattering cross section is suggested, which uses the area of intersection between two circles. Finally, the reverberation levels simulated with the scattering cross section estimated using the method suggested in this paper are compared with those estimated using the methods previously suggested and those measured from an acoustic measurements conducted in May 2013.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.3
• /
• pp.231-238
• /
• 2022

Mine detection has been mainly studied with images of the forward-looking sonar. Forward-looking sonar assumes the propagation path of the sound wave as a straight path, creating the surrounding images. This might lead to errors in the detection by ignoring the refraction of the sound wave. In this study, we propose a mine localization method that can robustly identify the location of mines in an underwater environment by considering the refraction of sound waves. We propose a method of estimating the elevation angle of arrival of the target echo signal in a single receiver, and estimate the mine location by applying the estimated elevation angle of arrival to ray tracing. As a result of simulation, the method proposed in this paper was more effective in estimating the mine localization than the existing method that assumed the propagation path as a straight line.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.601-609
• /
• 2022

In August 2007, coastal upwelling occurred off the east coast of Korea, and vertical water temperature and salinity data were obtained from a real-time surface ocean buoy. Based on the time series observation data, a vertical sound velocity structure was calculated before, during, and after the occurrence of the coastal upwelling, and how the coastal upwelling affects the sound propagation and detection environment through acoustic modeling considering the horizontal scale and actual seabed topography. As a result of comparing and analyzing the low-frequency (500 Hz) sound transmission loss and the target detection range by depth using the parabolic equation model, it was analyzed that if coastal upwelling occurs, a detection gain of up to about 10 dB can be expected. In addition, through this study, it was confirmed that the characteristics of sound propagation can be greatly changed even in a short period of about 2 to 3 days before and after coastal upwelling.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.345-356
• /
• 2023

Target signal of passive sonar shows narrow band harmonic characteristic with a variation in intensity within a few seconds and long term frequency variation due to the Lloyd's mirror effect. We propose a signal classification algorithm based on Gated Recurrent Unit (GRU) that learns local and global time series features. The algorithm proposed implements a multi layer network using GRU and extracts local and global time series features via dilated connections. We learns attention mechanism to weight time series features and classify passive sonar signals. In experiments using public underwater acoustic data, the proposed network showed superior classification accuracy of 96.50 %. This result is 4.17 % higher classification accuracy compared to existing skip connected GRU network.