• ICROS
• /
• v.15 no.1
• /
• pp.29-36
• /
• 2009

무인차량의 야지 자율주행에 있어서 지형 및 환경 인식기술은 다양한 지형/지물에 대한 인식, 분류 및 융합을 통하여 최종적인 자율주행 및 임무 목적용 인식 맴을 제작하기 위한 기술이다. 병렬기구는 조립, 포장, 기계가공, 크레인, 수중공학, 항공 및 해양구조, 비행 및 3D 시뮬레이션, 위성 접시안테나 위치제어, 망원경 자세제어, 그리고 정형외과 수술 등 여러 분야에 사용되고 있다.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1180-1187
• /
• 2018

This paper had implemented the underwater stage through interaction with fish robots and visitors in the background of traditional fairy tales using 3D floating hologram in an aquarium. The recognition of the object position of the spectator and the underwater robot were performed using the color recognition algorithm. Also, the position tracking algorithm was proposed to follow the object of the visitor and the original fairy tale. This experimental system consists of fish robot, camera, KIOSK for underwater robot control and beam project for underwater imaging. This experiment was carried out by the National Busan Science Museum, and it had satisfied the performance of the underwater stage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.6
• /
• pp.457-465
• /
• 2014

This paper introduces a test bed for communication protocol schemes of underwater acoustic sensor network, and also shows experimental results obtained from the test bed. As a testing protocol, carrier sense multiple access/collision avoidance (CSMA/CA) is evaluated on underwater acoustic channel. A sensor node is equipped with a DSP control board of ATmega2560 and a commercial underwater modem produced by Benthos. The control board not only manipulates a GPS signal to acquire the information of location and time, but also controls the underwater modem to operate according to the procedure designed for a given testing protocol. Whenever any event takes place such as exchanging control/data packets between underwater modems and acquiring location and timing information, each sensor node reports them through radio frequency (RF) air interface to a central station located on the ground. The four kinds of packets for CSMA/CA, RTS(Request To Send), CTS(Clear to Send), DATA, ACK(Acknowledgement) are designed according to the underwater communication environment and are analyzed through the lake experiment from the point of feasibility of CSMA/CA in underwater acoustic communications.

• Journal of Navigation and Port Research
• /
• v.33 no.6
• /
• pp.387-393
• /
• 2009

In this paper, a 3-D simulator was developed to estimate visually the performance of propelling and integrated control system of the underwater cleaning robot. Based on the dynamics analysis of the UCR, the 3-D model of the UCR was used in the simulator in which position and velocity are included Also, an input and control system using a joystick was developed, and the simulator was applied to the input and control of the simulator. Moreover, an integrated navigation control system was designed, and its performance was validated by a way-point simulator including a PI-based fuzzy control law.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.237-244
• /
• 2018

When underwater rubble leveling work is carried out by a robot, real-time information on the topography around the robot is required for remote control. If the topographical information with respect to the current position of the robot is displayed as a 3D graphic image, it allows the operator to plan the working schedules and to avoid accidents like rollovers. Up until now, the topographical recognition was conducted by multi-beam sonars, which were only used to assess the quality before and after the work and could not be used to provide real-time information for remote control. This research measures the force delivered to the bucket which presses the mound to determine whether contact is made or not, and the contact position is calculated by reading the cylinder length. A variable bang-bang control algorithm is applied to control the heavy robot arms for the positioning of the bucket. The proposed method allows operators to easily recognize the terrain and intuitively plan the working schedules by showing relatively 3-D gratifications with respect to the robot body. In addition, the operating patterns of a skilled operator are programmed for raking, pushing, moving, and measuring so that they are automatically applied to the underwater rubble leveling work of the robot.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.1
• /
• pp.38-48
• /
• 2020

In order to inspect the existing or newly constructed ship's hull, a professional diver directly inspects the ship's bottom of the water. However, since it is a work done by people, there are many dangers such as human casualties and crashes. To solve this problem, it is necessary to develop underwater drones for ship inspection for visual inspection. The technology applied to underwater drones, the use and manufacturing process of each component, and the method of manufacture such as firmware development were described, and the difference was compared by measuring the drone's own driving ability and driving ability using crawler under water, and the location tracking device test confirmed the error from the actual location. It is estimated that the use of underwater drones produced through this research will prevent human casualties and achieve economic effects and stability.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.1
• /
• pp.48-54
• /
• 2007

In this paper we have implemented a 3-D PL (Position Location) system to estimate the 3-dimensional position of a moving object in underwater environments. In this research, we let four sensors fixed in different Positions and moving sensorsto communicate with each other to find the 3-dementianal positions for both the fixed and moving objects. Using this we were also able to control the moving object remotely. When finding the position, we calculated the norm of the Jacobian matrix every iteration in the Newton algorithm. Also by using a different initial value for calculating the solution when the norm became higher than the critical value and the solution from the inverse matrix became unstable, we could find a more reliable position for the moving object. The proposed algorithm was used in implementing a DSP system capable of real-time position location. To verify the performance, experiments were done in a water tank. As a result we could see that our system could located the position of an object every 2 seconds with a error range of 5cm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.3-9
• /
• 2017

Due to difficulties of continuous electric power provision to underwater communication nodes, the efficient power usage is highly required in underwater network protocol. In this paper, we studied the energy efficient MAC(Medium Access Control) protocol for underwater network supporting mobile nodes such as UUV(Unmanned Underwater Vehicle) and AUV(Autonomous Underwater Vehicle). The mobile nodes could waste the electric power in vain when the receiver moves out of the radio propagation coverage during the data exchange and thus the transmitted data fails in reaching the receiver. Expecially, such a failure is much more obvious in underwater acoustic channels since the propagation delay is about $10^5$ times slower than in terrestrial radio channels. This proposed mobility-MAC controls the data dropping stochastically in the Dropping Zone by considering the receiver's location and moving velocity. In conclusion, this selective dropping method not only improves latency and throughput by reducing invalid droppings but also boosts power efficiency by valid droppings.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.510-515
• /
• 1993

본 연구에서는 저속에서도 시스템의 자세 제어가 용이하게 하기 위하여 추진기 뒤에 제어판이 위치하도록 설계하였으며, 일반 서보 시스템과는 달리 무게와 공간 제약이 크고, 제어판 운동에 따른 외란 등록성의 변화가 심하므로 push-pull 형태의 소형, 고출력 편로드 복동 복수 실린더의 작동기를 설계하였다. 또한 일반적으로 서보밸브와 작동기는 일체형으로 설계되나 본 시스템의 공간상 심한 제약으로 인하여 서보밸브와 작동기를 분리하는 방법으로 구조설계를 하고 그 사이 유로는 매니폴드식으로 하여 동력전달을 하였다. 설계된 구동장치를 실제 정밀제작하여 실험을 수행하였으며, 시뮬레이션 결과와 실험에 의하여 얻어진 결과를 비교 분석하여 설계의 타당성 및 시스템의 성능을 검증하였다. 고속 수중운동체에 대하여 저속에서 자세제어를 용이하게 하고, 제한된 좁은 설치공간의 문제점을 해결하기 위하여 1) 추진기 후미에 독립된 4개의 상, 하, 좌, 우 제어판 설치 2) 서보밸브는 몸체에, 작동기는 Tail Tube에 분리 작동 설계 3) 소형의 편로드 복동 복수 실린더로 설계 구성된 유압식 구동장치는 시뮬레이션과 실험 결과를 통하여 시스템의 타당성을 입증하였다. 그러므로, 개발한 구동장치는 저속에서도 큰 제어력으로 자세 제어가 용이하기 때문에 얕은 수심에서 발사시 예상되는 위험 요소를 상다ㅇ 개선 시키므로써 운용범위의 다양화를 가져 올것으로 기대된다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.3 s.303
• /
• pp.33-40
• /
• 2005

In order to successfully exploit underwater resources, the first step would be a marine environmental research and exploration on the seafloor. Traditionally one sets up a long-term underwater experimental unit on the seafloor and retrieves the unit later after a certain period time. Essential to these applications is the reliable teleoperation and telemetering of the unit. This study presents ultrasonic-wave remote control system and an underwater sound recognition algorithm that can identify the sound signal without the influence of disturbances due to underwater environmental changes. The proposed method provides a means suitable for units which require low power dissipation and long-time underwater operation. We demonstrate its ability of securing stability and fast sound recognition through experimental methods.