• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.314-319
• /
• 2021

The measurement of the Underwater Radiated Noise (URN) for the underwater vehicle should consider both the acoustic interference due to the surface reflection and the calculation of the Closet Point of Approach (CPA). In this paper, I tried to analyze the underwater vehicle's URN using the Lloyd's mirror effect. First, the theoretical Lloyd's mirror pattern was compared with the sea trial result, and the sea trial results corresponded well with the theoretical predicted pattern. And then the CPA distance could be estimated by the Lloyd's mirror pattern. As a results, acoustic source level shows the spectral fluctuation due to the acoustic interference of the Lloyd's mirror effect.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.407-408
• /
• 2014

본 논문은 3차원 수중방사패턴 예측을 위하여 수중구조물의 표면진동장을 이용하여 3 차원 원음장 패턴을 예측한 뒤 수중구조물의 근접음장 계측데이터를 활용하여 산출된 원음장 음향파워를 이용하여 산출된 원음장 패턴의 음압크기를 보정하였고 이를 실험데이터와 비교 분석한 논문이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.240-242
• /
• 2014

This paper presents the system which can be predicted 3-D underwater radiated noise pattern using submarine hull velocity and can be analyzed the counter detected performance for threats in real time. To verify the developed system the tests were done in a water tank for structure like a submarine. The far field radiated noise pattern predicted using the developed system is compared with the result calculated using the near field measurement system, these results have shown good agreement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.599-607
• /
• 2006

The ship radiated noise appear the various characteristic signals due to the mechanic system in the ship, the propeller and the interaction between ship body and sea water. Generally, it is classified two main components: the speed dependent signal and the speed independent signal. It is required that very complex procedure to classify the signal origin from the ship-radiated noise. This paper presents techniques to automatically detect and classify the tonal signals ken the ship-radiated noise, using the Q factor and the neural network.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.10
• /
• pp.770-779
• /
• 2014

In this study, a numerical estimation method for 3D underwater radiated noise pattern using hull vibration and total acoustic power of the vibrating structure in the far-field is proposed. The underwater radiated noise pattern is known to be predicted using the vibration signals and radiation efficiency of each surface patch. But it is very difficult to know radiation efficiency of each surface patch which is one of important factors to calculate the 3D underwater radiated noise pattern. Instead of using radiation efficiency of each patch, the underwater radiated noise level is modified with the total acoustic power of the vibrating structure. The suggested estimation method for underwater radiated noise pattern is discussed with numerical model.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.629-632
• /
• 2004

수중 표적을 식별하기 위해서는 표적이 방사하는 소음의 특징을 미리 알고 있어야 한다. 소음의 특징은 스펙트럼상의 상이한 주파수나 특징적 패턴을 형성하는데 수중에서 표적을 구별하는 주요 성분이다. 이 논문에서는 이런 표적의 고유 식별 정보를 모델링하고 구축하는 수중 음향 분석 시스템을 설계, 구현하였다. 이로써 표적관련 음파 특징 정보를 수치화하고 체계적으로 구축해 정밀분석의 토대를 마련하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.175-178
• /
• 2004

선박의 수중방사소음은 다양한 기계류나 추진기 혹은 선체와 유체간의 상호 작용으로 인하여 여러 형태의 특성신호로 나타나게 된다. 이는 선박의 운용조건, 장비 회전특성 및 내부구조에 따라 스펙트럼상에 상이한 주파수로 확인됨은 물론, 신호의 출현 형태에도 다양성을 보이고 있다. 일반적으로 선박소음은 속력 종속적인 추진 계통 성분과 비종속적인 보기류 신호로 구분되나 다수의 신호성분이 혼재되어 발생기원을 분류하는 것은 복잡한 과정을 거쳐야 한다. 본 연구에서는 이러한 점을 해결하기 위해 선박의 Tonal성 신호를 자동으로 탐지하고 분류하기 위해 규준화된 스펙트로그램 상에서 연속되는 신호에 가중치를 주어 지속성 신호여부를 판별한 후에 정해진 임계치를 초과하는 성분을 Tonal로 선정하였다. 선정된 Tonal에 대해 주파수선의 대역특성 및 시간 변동성에 대한 패턴인식 방법을 적용하여 Tonal의 발생기원이 속력 종속/비종속적인지를 자동으로 판별하는 알고리즘의 유용성에 대한 결과를 기술하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.12
• /
• pp.969-976
• /
• 2014

Nowadays, it is required for naval ships to estimate 3D underwater radiated noise pattern in all direction at peak frequencies of hull vibration for the reduction of being detected and doing the effective operation. For this purpose, the numerical method has to be developed to calculate 3D underwater radiated noise pattern with experimental data. It is very difficult to obtain the experimental data for the real ship. Alternative to get the experimental results is to use NAH(near-field acoustic holography) in acoustic tank with experimental model. Application of NAH in acoustic tank for the experimental model needs some investigation of reflection wave from the wall of the acoustic tank and unmeasured zone of the experimental model due to the supporting structure for it. In this study, the effect of reflection wave in the acoustic tank and unmeasured area of the experimental model when using the NAH was investigated with experiment and numerical model. From these, it is known for the error due to reflection wave can be reduced when the distance between the measurement plane and source is being shorten. Also, unmeasured area of the experimental model gives rise to some error in the estimation of the far-field acoustic pressure.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.11
• /
• pp.907-918
• /
• 2014

In this study for the prediction of 3D underwater radiated noise pattern, a comparison between the proposed method(DHIE, Discrete Helmholtz Integral Equation) and the 3D underwater radiated noise calculation results using the measurement of near-field acoustic pressure data is performed. The near-field acoustic pressure in water is measured for the calculation of the far-field radiated noise pattern and the far-field acoustic power. Also the vibration field of the underwater structure is measured in simultaneously. Using the total far-field acoustic power and the vibration field on the surface of the structure, the proposed method(DHIE) can predict the underwater radiated noise pattern of the far-field The predicted results show the reasonable agreement within about 5dB comparing with the experiment result.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.4
• /
• pp.173-181
• /
• 2007

In this paper, we propose a moving target localization algorithm using acoustic spectrograms. A time-versus-frequency spectrogram provide a information of trajectory of the moving target in underwater. For a source at sufficiently long range from a receiver, broadband striation patterns seen in spectrogram represents the mutual interference between modes which reflected by surface and bottom. The slope of the maximum intensity striation is influenced by waveguide invariant parameter ${\beta}$ and distance between target and sensor. When more than two sensors are applied to measure the moving ship-radited noise, the slope and frequency of the maximum intensity striation are depend on distance between target and receiver. We assumed two sensors to fixed point then form a circle of apollonios which set of all points whose distances from two fixed points are in a constant ratio. In case of three sensors are applied, two circle form an intersection point so coordinates of this point can be estimated as a position of target. To evaluates a performance of the proposed localization algorithm, simulation is performed using acoustic propagation program.