• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.450-459
• /
• 2009

The aim of this study was to measure the initial dynamic modulus changes of light cured composites using a custom made rheometer. The custom made rheometer consisted of 3 parts: (1) a measurement unit of parallel plates made of glass rods, (2) an oscillating shear strain generator with a DC motor and a crank mechanism, (3) a stress measurement device using an electromagnetic torque sensor. This instrument could measure a maximum torque of 2Ncm, and the switch of the light-curing unit was synchronized with the rheometer. Six commercial composite resins [Z-100 (Z1), Z-250 (Z2), Z-350 (Z3), DenFil (DF), Tetric Ceram (TC), and Clearfil AP-X (CF)] were investigated. A dynamic oscillating shear test was undertaken with the rheometer. A certain volume ($14.2\;mm^3$) of composite was loaded between the parallel plates, which were made of glass rods (3 mm in diameter). An oscillating shear strain with a frequency of 6 Hz and amplitude of 0.00579 rad was applied to the specimen and the resultant stress was measured. Data acquisition started simultaneously with light curing, and the changes in visco-elasticity of composites were recorded for 10 seconds. The measurements were repeated 5 times for each composite at $25{\pm}0.5^{\circ}C$. Complex shear modulus G*, storage shear modulus G', loss shear modulus G" were calculated from the measured strain-stress curves. Time to reach the complex modulus G* of 10 MPa was determined. The G* and time to reach the G* of 10 MPa of composites were analyzed with One-way ANOVA and Tukey's test ($\alpha$ = 0.05). The results were as follows. 1. The custom made rheometer in this study reliably measured the initial visco-elastic modulus changes of composites during 10 seconds of light curing. 2. In all composites, the development of complex shear modulus G* had a latent period for $1{\sim}2$ seconds immediately after the start of light curing, and then increased rapidly during 10 seconds. 3. In all composites, the storage shear modulus G" increased steeper than the loss shear modulus G" during 10 seconds of light curing. 4. The complex shear modulus of Z1 was the highest, followed by CF, Z2, Z3, TC and DF the lowest. 5. Z1 was the fastest and DF was the slowest in the time to reach the complex shear modulus of 10 MPa.

• Korean Journal of Plant Taxonomy
• /
• v.42 no.3
• /
• pp.215-221
• /
• 2012

Five Korean Calanthe species, C. discolor, C. bicolor, C. sieboldii, C. reflexa, and C. aristulifera, were studied using amplified fragment length polymorphism (AFLP) to assess their taxonomic and genetic relationships. Sixteen accessions belonging to five native Calanthe spp. and mutants with yellow tepal and white lip (YW mutants) were studied. We identified 50 putative markers using AFLP analysis. The results of AMOVA showed that genetic variance was higher between species than within species. Genetic dissimilarity when compared with the rest of the species was the lowest for individuals of the YW mutants and the highest for individuals of C. reflexa. The mutants clustered outside the major group. Calanthe bicolor clustered with C. discolor, suggesting that its genetic composition is closer to that of C. discolor. Though it is suggested to have originated as a result of natural hybridization between C. sieboldii and C. discolor, introgression is likely to have occurred in the direction of C. discolor based on the data of molecular marker, clustering and genetic dissimilarity. Calanthe reflexa and C. aristulifera were genetically the most diverse of the species studied. In conclusion, the results showed that there is genetic diversity in Korean Calanthe species, that C. bicolor introgressed in the direction of C. discolor and that the YW mutants are genetically closer to C. sieboldii.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.664-669
• /
• 2010

The forest area of domestic is 6370304 ha, which covers 70% of the whole country, and especially Gangwon-do is remarkably larger than other Province. A thick forest of the country has the most basic component among other natural environments as well as it has invaluable worth to human being such as scientific research and educational value. However due to the breakout of forest fire since 1990s, the loss of trees, destruction of natural environment and ecology, economic damage have been occurring and its scale also has become larger. The causes of becoming larger in scale are resulted from forest components which mainly consist of needle leaf trees, wide leaf trees, fallen leaves, herbaceous plants so that it has been a direct cause for forest fire. However, few research on combustion and pyrolysis characteristics has been done in domestic and abroad. The study on the combustion and pyrolysis for Pinus densiflora which are typical needle leaf trees has been tried using TGA. Pinus desiflora started to being ignited at around $162^{\circ}C$ and pyrolysis was done at around $197^{\circ}C$. Differential method was applied to calculate activation energy and frequency factor according to the variation of conversion. Activation energy in pyrolysis was increased from 79 kJ/mol to 487 kJ/mol with increasing conversion and average activation energy was 195 kJ/mol. The activation energy in combustion was decreased from 148 kJ/mol to 133 kJ/mol.

• Korean Journal of Environment and Ecology
• /
• v.11 no.3
• /
• pp.366-386
• /
• 1997

This study was conducted to investigate the flora of Mt. Myongji and also to find the distribution characteristecs of rare and endangered plants in this mountain. Field surveys were carride out 21 times from 1991 to 1997. Main results obtained from this study were as follows; 1. Mt. Myougji was covered with Pinus koraiensis and Sarix leptolepis stands at the altitude lower than 600m, and deciduous forests which were consisted of Quercus mongolica, Carpinus sp., Acer sp., Cornus sp., Fracinus sp., etc. occupied at the altitude higher than 600m. Dicentra spectabilis population and Anemone population were remardable, and Adenophora grandiflora and Astilbe chinensis var. davidii with white flowers were found. 2. The vascular plants in Mt. Myoungji were recorded as 677 taxa such as 19 families, 358 genera 576 species 90 varieties 11 forma. Among them. 19 families 31 genera 32 taxa were endemic plants and 27 taxa were naturalized plants. 3. 26 taxa of rare and endangered plants protected by Forestry Administration were found in Mt. Myonfji. Among them, Asarum maculatum. Hanabusaya asiatica, Lilum cernum. Jeffersonia dubia, and Cypripedium japonica populations could be regarded as very important in a biogeraphical aspect. So it is necessary to monitor this area in a long term and to establish the conservation strategies.

• Journal of Forest and Environmental Science
• /
• v.9 no.1
• /
• pp.67-80
• /
• 1993

There are a lot of serious problums associated with conventional pulping processes, such as kraft and sulfite. In order to tackle these difficulties, organic acid pulping of Populus tomentiglandulosa T. Lee and Pinus densiflora S. et Z. have been investigated as on alternative method. The acetic acid cooking of Populus tomentiglandulosa T. Lee achieved good delignification with pulp yields of 55-65% under almost all cooking conditions. In the acetic acid cooking of Pinus densiflora S. et Z., it was not cooked at a low temperature. The strength properties of the acetic acid pulps from Pinus tomentiglandulosa T. Lee showed the optimum with 95% acetic acid concentration at $185^{\circ}C$ maximum cooking temperature for 0.5hr cooking time. The strength properties of the acetic acid pulps from Pinus densiflora S. et Z. displayed excellent tear strength in comparison with those of the other softwoods. In the process of acetic acid cooking, glucose has been removed a little, but other sugars have been eliminated. The elemental compositions and $C_9$ formulas of acetosolv lignins from Populus tomentiglandulosa T. Lee were 63.88% carbon, 5.45% hydrogen and 30.67% oxygen and $C_9H_{9.15}O_{3.24}$ The elemental compositions and $C_9$ formulas of acetosolv lignins from Pinus densiflora S. et Z. were 61.85% carbon, 6.14% hydrogen and 32.01% oxygen and $C_9H_{9.15}O_{3.50}$ The Wt. av. MWT's of the acetosolv lignins from Pinus tomentiglandulosa T. Lee and Pinus densiflora S. et Z. were 731 and 725.

• The Korean Journal of Ecology
• /
• v.27 no.5
• /
• pp.257-261
• /
• 2004

Juniperus chinensis var. sargentii Henry is a short and creeping evergreen shrub which reaches about 50㎝ in height and occurs in the northeast Asia and in high mountains over the South Korea. Its distribution is restricted, and the number of individuals are gradually decreasing. This study was conducted to estimate spatial pattern, genetic diversity and spatial genetic structure of J. chinensis var. sargentii. A total of 131 clumps were studied in the study area (40m × 60m). The spatial pattern of this population was random (Aggregation index R=1.031). In spite of the small number and the limited distribution, the level of genetic diversity (Shannon's index 1=0.463) was relatively high as compared with those of other plant species with similar ecological characteristics. ISSR genotypes of all individuals were investigated to find the genetic relationship of clumps and genets. Fifteen clumps were composed to be clones, and a total of 116 unique genotypes were composed by separate genets. Spatial autocorrelation analysis using Tanimoto distance showed that the genetic patch was established within 8m. The effect of clonal reproduction on genetic structure was almost nothing.

• Journal of Korean Society of Forest Science
• /
• v.77 no.1
• /
• pp.53-64
• /
• 1988

The idiogram of pine chromosomes was obtained from the length, the ratio of the long and short arm, and the position of the secondary constriction. The descending order of the long arm was found by analyzing the idiogram for 6 species of hard pines and 5 species of soft pines growing in Korea. The basic chromosome number of the genus Pinus was n=12, of which the ten chromosomes were the M-type showing similar S/L ratio, and the other two short chromosomes were the heterobrachial SM-type and the sub-median centric SM-type. The interspecific identification was able to made by comparing the number and the position of the secondary constriction, and the pattern of descending order of the long arm. The intraspecific variation was also able to be identified by comparing the long arms Descending order among the provenaces. Some differences were found in the chromosomal structures between the hard- and the soft-pines. However, the differences were not apparent as much as those in the morphological characteristics. The results might not be exactly reproducible because of the variable responses of chromosomes depending on concentration of the chemicals, the temperatures and time of the treatments, and the analytical errors during the preparateur preparation.

• Journal of Korean Society of Forest Science
• /
• v.68 no.1
• /
• pp.37-45
• /
• 1985

The second year's results of surface fire effects on forest vegetation and soil properties and fire tolerance of various tree species were investigated in Mt. Gwanak, Kyunggi-do, successively after the study of the first year's effect in the same place. Soil moisture contents, organic matters, and most of soil nutrients including exchangeable bases had increased just after fire and went down to become somewhat constant. Available phosphorous at fired area decreased until it became similar to that at unfired area, while pH of subsoil was continuously increasing from just after fire till after 1 year. For Lespedeza and Weigela species, fire tolerance of tree crown was the lowest but reproductive capacity was the highest. And both of them were high for Rhododendron species. More exact classification into Increasers, Decreasers, Invaders and Neutral species was possible in the second year's study. According to comparison of similarities, it was found that the vegetational structure at fired area is slowly restoring to original state as time goes.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.4
• /
• pp.268-275
• /
• 2012

This study was carried out to understand the anatomical characteristics of Korean mistletoe (Viscum album var. coloratum) and host tree of Mongolian oak (Quercus mongolica) by the aid of light and scanning electron microscopy. The branch diameter of host tree at the parasitic part by mistletoe is larger than that of non-parasitic part. In the mistletoe, phloem consists of bast fiber and parenchyma cell and xylem is composed of fiber, ray and axial parenchyma cell, and vascular tracheid. The volume of ray parenchyma cell is higher than common wood species and is heterocellular made up of procumbent, upright, and square cells in the mistletoe. In the vascular tracheid of mistletoe, coarse spiral thickenings and bordered pit are present. Due to the insertion of the mistletoe haustorium, some deformed vessels but no tylosis are observed in the mistletoe. The shapes of mistletoe haustorium are sharp, and the destruction of the host tree cells due to the insertion of the mistletoe haustorium are not identified.

• Journal of Wetlands Research
• /
• v.15 no.4
• /
• pp.501-508
• /
• 2013

We have researched heterogeneity of naturalized river plant community by ${\beta}$-diversity for restoration of river community which has high diversity plant species. As a result the average of heterogeneity was 0.32(range 0.23~0.37) from the river to the inland. This value shows community turnover of species composition of plant communities 6 times. The ${\beta}$-diversity was no difference among water system of Seomjin river, Han river, Nakdong river and Geum river. The upper-river valley(0.36) was higher than lower-river valley(0.23) in each water system(p level<0.05). Multiple regressing analysis was used for look the relationship with Environmental factors as a result, it shows ${\beta}$-diversity significant on a slope. River mimetic diagram with dominant species that appear through Belt-transect painted. Dominant plant species turned 6 time in upper-river and turned about 5 time in lower-river. The result of this study suggested practical basis of planting species and planting pattern. To improve species diversity of river plant community, slope degree raise is the most important.