• Journal of Korea Water Resources Association
• /
• v.36 no.5
• /
• pp.851-861
• /
• 2003

Snow accumulation and snow melt was simulated and included in the computation of the watershed runoff for Soyanggang Dam and Chungju Dam. A modified Tank Model was used for the simulation, which has three serial tanks and a pulse response function. The model parameters were estimated through the global optimization method of Shuffled Complex Evolution-University of Arizona (SCE-UA). A watershed was divided into four zones of elevation. The temperature decrease of the zones was a rate of -0.6$^{\circ}C$/100m. Almost all precipitation from December to February become accumulated as snow, and then the snow melts and runs off from March to April. The average runoff with snow melt was greater than the average runoff without snow melt during the period from March to April. The improved amount from snow melt simulation was about one fifth of the observed one for Soyanggang Dam. The increased amount for Chungju Dam was about one fourth of the observed average runoff during the same period. Although the watershed runoff was simulated including snow melt, it was less than the observed one for both of the dams.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.3
• /
• pp.47-59
• /
• 1994

The irrigation reservoir operation models developed were tested with weather and field data, and the sensitivity of the water requirement deficiency indices(WRDI) were checked with different initial reservoir storages, irrigated areas, and other water uses from the reservoir storage. Seven reservoir release rules were applied to Yongseol Reservoir. Twenty year WRDIs were computed to check performances of those reservoir release rules. Mean WRDIs were 138, 198, 198, 200, 240, 344, and 1033mm for ROM, TOS, COS, CRR, MSC, FAS, and SRC, respectively. The results indicated that ROM contributes consistently to higher operation efficiencies of an irrigation reservoir. The test results of LFROM and SFROM showed that reservoir operation with the proposed optimization technique ROM would be better suited for an irrigation district than those with the other rules. And the proposed model could be used as a tool to improve reservoir operations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.432-432
• /
• 2015

농업용 저수지의 하류유역은 저수지로부터 농업용수를 공급받는 관개지구와 산림지 등 관개를 실시하지 않는 비관개지구의 수문순환이 복합적으로 연계된다. 이러한 저수지 하류유역의 하천유량은 배후 유역에서 발생하는 유역 유출량, 관개지구의 농업용수 회귀수량, 저수지에서 방류되는 환경용수 방류량과 제한수위 및 만수위 방류량, 그리고 지하수 유출량 등으로 구성된다. 본 연구에서는 저수지 하류의 하천유량 구성 요소를 해석하는 하천망 모형을 구성하였고, 대상지구의 자료를 구축하였으며, 모형의 보정 및 검정을 수행하였다. 비관개지구의 유출량 모의는 수정 3단 Tank 모형을 이용하였다. 관개지구의 배수량은 논 포장 배수량과 용수로 배수량을 구분하여 모의하며, 논 포장 배수량은 논 물수지식을 기반으로 모의하였다. 저수지 방류량은 저수지 유입량과 저수지 운영방식을 고려하여 모의하도록 구성하였다. 하도 추적은 Muskingum 방법을 이용하였다. 연구 대상지로 이동저수지 유역을 선정하여 기상, 지형, 수문, 그리고 영농 자료를 수집하여 모형의 입력 자료를 구축하였다. 모형의 평가를 위한 통계적 지표는 Nash-Sutcliffe efficiency (NSE), root mean square error-observations standard deviation ratio (RSR), 그리고 percent bias (PBIAS)를 이용하였다. 보정 및 검정 결과 구성된 모형의 모의 결과는 실측치의 경향을 잘 반영하는 것으로 나타났다. 본 연구 결과는 우리나라 농촌유역 물순환에 대한 이해를 넓히며, 저수지 하류유역 유량 해석을 위한 기초자료로 이용될 수 있을 것으로 사료된다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.316-322
• /
• 2017

The primary objective of the current study is to develop outstanding hull form on resistance performance by using numerical analysis code. Model tests were conducted to assess the resistance performance of the developed hull form. The investigation of an existing vessel was performed for validating the actual ship design based on the drawing. The operating displacement and speed were mainly confirmed through investigation of the existing vessel. The resistance performance of the existing vessel was analyzed using numerical code. The developed vessel was derived through studies on wave improvement of the bow shoulder, the balance of displacement distribution, the modification of the frame shape, and the size and shape change of the center skeg. Based on the results of a computational fluid dynamics analysis, the resistance performance of the developed vessel showed an improvement of 15% over the existing vessel at a speed of 11 knots. Resistance tests were conducted to evaluate the performance of the existing vessel and the developed vessel in the towing tank. Finally, the effective horsepower of the developed vessel showed an improvement of 17% over the existing vessel.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6B
• /
• pp.551-560
• /
• 2010

This study presents the export of constituent transport loads through a river system. The proposed constituent transport load estimating procedure can be operated with the on-going Korean TMDL monitoring system. This study firstly discusses the use of a hydrologic simulation model (TANK) to estimate stream-flow for the 40 sub-catchments. Model parameters are estimated from 8-days intervals flow data which has been monitored by NIER since 2004. Constituent transport loads are estimated with the 7-parameter log linear model whose parameters are estimated by the minimum variance unbiased estimator. Results from Nakdong river basin reveals that the proposed procedure provides satisfactory TN, TP and SS transport load estimates. As an application, a representative load duration curve is derived to represent the overall hydrologic flux of TN, TP and SS at Nakdong river basin.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.1-6
• /
• 1992

The finite difference simulation method for ship waves is introduced for hull form improvement. Numerical simulations were performed for a series of modified hull forms and the simulated results were used for the determination of the better hull forms. A 4,400 TEU container carrier which was designed and experimented in towing tank was chosen for the purpose. The calculation results are compared with those of model test, of simplified Neumann-kelvin problems and of Rankine source method. In this study, it is shown that the combination of the computer simulation by our method with the experiment provides one of the most economical and reliable procedures of hull form improvement and that the degree of accuracy of this method is so high that it can cope with very practical design purposes.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.21-30
• /
• 1990

Theoretical and experimental techniques to analyze the two-dimensional liquid motion in a tank are discussed. A Lagrangian FEM with a velocity correction procedure is introduced to describe incompressible free surface fluid flow. A mesh rezoning technique is used to prevent strong distortion of finite elements in the Lagrangian description. Model test technique for sloshing tank is developed using a hydraulic type bench tester. The influence of the variation in the exciting frequency and amplitude are observed for various fill depths. The results of theoretical calculations are compared with those of experiments.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.335-344
• /
• 2011

A curvilinear non-hydrostatic free surface model is developed to investigate nonlinear wave interactions in a circular channel. The proposed model solves the unsteady Navier-Stokes equations in a three-dimensional domain with a pressure correction method, which is one of fractional step methods. A hybrid staggered-grid layout in the vertical direction is implemented, which renders relatively simple resulting pressure equation as well as free surface closure. Numerical accuracy with respect to wave nonlinearity is tested against the fifth-order Stokes solution in a two-dimensional numerical wave tank. Numerical applications center on the evolution of nonlinear waves including diffraction and reflection affected by the curvature of side wall in a circular channel comparing with linear waves. Except for a highly nonlinear bichrmatic wave, the model's results are in good agreement with superimposed analytical solution that neglects nonlinear effects. Through the numerical simulation of the highly nonlinear bichramatic wave, the model shows its capability to investigate the evolution of nonlinear wave groups in a circular channel.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.189-189
• /
• 2021

최근 기후변화로 인한 가뭄, 홍수 등의 기상재해 발생빈도가 증가함에 따라 저수지의 용수공급 안정성이 감소하고 있다. 우리나라 농업용수는 총 수자원 이용량의 48%를 차지하고 있으며 영농활동의 필수 자원으로 농업용 저수지의 용수공급에 크게 의존하고 있다. 하지만 유효저수용량을 기준으로 다목적댐과 비교하였을 때 농업용 저수지의 규모가 작으므로 가뭄이 발생하게 된다면 용수공급에 큰 어려움을 겪을 수 있다. 또한 농업용 저수지의 절반 이상이 준공년도가 70년 이상으로 농업용 저수지의 노후화가 심각한 상태이며 수문 실측자료가 부족하여 이수 측면의 활용성과 관련된 연구가 부족한 실정이다. 이에 따라 농업용 저수지의 안정적인 용수공급 및 이수 측면의 분석을 위해서는 농업용 저수지 상류의 정확도 높은 장기유출량 산정이 선행되어야 한다. 현재 농업용 저수지의 장기유출량 산정을 위해 사용되고 있는 DIROM 모형은 Sugawara의 TANK 모형을 우리나라 농업용 저수지의 유역 특성에 맞게 수정한 일별 유입량 모의 발생 모형이다. 그러나 DIROM 모형의 매개변수는 1980년대에 개발된 이후 현재까지 특별한 개선없이 사용되고 있다. 따라서 최근 우리나라의 기후 및 토지이용 특성이 변화함에 따라 유출 특성이 변화하였기 때문에 장기유출량 산정을 위한 매개변수 개선이 필요하다. 본 연구에서는 하천의 최상류에 위치한 수위 관측소의 유출량 자료를 활용하여 지역별 DIROM 모형의 매개변수를 추정하고, 추정된 매개변수를 활용하여 회귀식을 개발하고자 하였다. 개발된 회귀식의 검증을 위해 최근 수문자료 관측을 수행하기 시작한 농업용 저수지의 실측 수문자료를 활용하였다. 이를 통해 농업용 저수지의 안정적인 용수공급 및 저수지 관리를 통해 농업용수의 활용성을 개선할 수 있을 것이라 판단된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.830-839
• /
• 2010

This study presents a constituent load estimating procedure that can be operated with the present Korean TMDL monitoring system. The modified TANK model is used as a daily river flow simulation model whose parameters are estimated from 8-day intervals flow data. Constituent loads are estimated with the 7-parameter log linear model whose parameters are estimated by the minimum variance unbiased estimator. Results from Nakdong river basin reveals that the proposed procedure provides satisfactory TOC and BOD load estimates. As an application, a representative load duration curve is derived for working out a way to represent the overall hydrologic flux of BOD, COD and TOC at Nakdong river basin. The present water quality can be checked stochastically by Load Duration Curve through this study and presented visually.