• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.120-125
• /
• 2002

In the preceding tests using the KSR-III Sub.(I) engines, it was observed that the heat resistant capability of the engines was not enough for the mission. So Sub.(I) Mod. engines were designed and tested. The Sub.(I) Mod. engines have three major design parameters - the arrangement of main injectors, the impinging angle of main injectors and thermal barrier coating. More than twenty experiments were carried on to evaluate engine performance and heat resistance capability with respect to design parameters. In this study, the test results are introduced. Analysing the result of Sub.(I) engine tests, it is found that decreasing the impinging angle, adopting the H-type arrangement(rather than radial type arrangement) and adopting the thermal barrier coating can increase heat resistance capacity substantially. Also, engine performance evaluation is conducted using specific impulse and characteristic velocity parameter. The results show that the performance variation is small(about 5%) and the performance is better in the case of radial arrangement. It is suspected that these phenomena are caused by the change of flame structure atomization mixing characteristic of sprays and the distortion of recirculation zone. Also from the low frequency instability point of view, it is observed that reducing the impinging angle and adopting the H type arrangement can increase the instability characteristics.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.103-112
• /
• 2007

In this paper, we implement a hypervisor that runs multiple uC/OS-II real-time kernels on one microprocessor. The hypervisor virtualizes microprocessor and memory that are main resources managed by uC/OS-II kernel. Microprocessor is virtualized by controlling interrupts that uC/OS-II real-time kernel handles and memory is virtualized by partitioning physical memory. The hypervisor consists of three components: interrupt control routines that virtualize timer interrupt and software interrupt, a startup code that initializes the hypervisor and uC/OS-II kernels, and an API that provides communication between two kernels. The original uC/OS-II kernel needs to be modified slightly in source-code level to run on the hypervisor. We performed a real-time test and an independent computation test on Jupiter 32-bit EISC microprocessor and showed that the virtualized kernels run without problem. The result of our research can reduce the hardware cost, the system space and weight, and system power consumption when the hypervisor is applied in embedded applications that require many embedded microprocessors.

• Journal of the Korean Geosynthetics Society
• /
• v.5 no.3
• /
• pp.1-7
• /
• 2006

The Green Wall system, developed in Austria early 1960, is one of segmental concrete crib type earth retaining wall. Green wall is constructed as procedures that lay the front stretchers, rear stretchers and headers then making a rigid body through harden filled soil of interior cell. Green wall has pro-environmental advantages that able to grow grass in front space of stretchers and decrease cutting ground. In Europe, Green wall used without other reinforcement method. However, green wall used with other reinforcement method like a soil nailing because of environmental problem. This study was performed to introduce the design case by 'Two-Body Translation mechanism' to be able to consider distribution of earth pressure in the soil nailing when designing the green wall using soil nailing system. Also, this study attempts to evaluate the earth pressure change when advanced soil nailing system is constructed using $FLAC^{2D}$ ver. 3.30 program and 'Two-Body Translation mechanism'.

• Tunnel and Underground Space
• /
• v.14 no.2
• /
• pp.86-96
• /
• 2004

Rock mass classification methods such as RMR, Q system and GSl have been widely adopted with certain modifications for the design of mine openings. The GSI system is the only rock mass classification system that is related to Mohr-Coulomb and Hoek-Brown strength parameters and gives a simple method to calculate the engineering properties of rock masses which can be useful input parameters for a numerical analysis. A detailed surveying for GSI mapping as well as far calculating RMR values was undertaken at Daesung and Pyunghae underground limestone mining sites. RQD values were determined for row locations in these two mining sites. Based on GSI values and intact rock strength properties, the rock mass strength modulus of elasticity as well as the Mohr-Coulomb strength parameter c$_{m}$ and $\phi$$_{m}$ were determined. GSI and RMR are correlated.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.275-281
• /
• 2013

This space is for the of your study in English. If simple menu item changes or the addition of check items are necessary on GUI menu of existing test equipments for military facilities that are programmed by using RAD tools such as Visual C++, they should go through complex steps, such as numerous conducting steps, coding, flash design modification, recompiling and distribution. It is cumbersome process and waste much time. Also, on implementing them, it was worried about leaking secrets because a number of military security considerations were included. To solve such as the above problem, we proposed commercial RIA technologies and a COTS fault diagnostic knowledge-based system that implemented by the XML data design technique in this research. The proposed approach solves the problem of existing methods, reduced inspection time, and improved performance, usability, and maintainability.

• Journal of the Korean earth science society
• /
• v.39 no.3
• /
• pp.260-274
• /
• 2018

The purpose of this study was to propose curriculum and teaching sequence for seasonal change by exploring a learning progression. For the purpose, 4 steps of construct modeling approach (specifying construct, item design, outcome space, and measurement model) proposed by Wilson (2005) was applied. In the stage of specifying construct, 'length of shadow according to seasons', 'position of constellation according to seasons', 'seasons of the southern hemisphere and northern hemisphere', 'cause and phenomenon of seasonal change' were selected as the subconstructs of seasonal changes, and constructed a construct map showing the level of development from level 1 to level 4 for each subconstruct based on the results of the previous research. In the item design stage, we developed five assessment items consisting of 3 items in the form of C-E (choose and explain) and two items in the form of CR (constructed response), applied it to 383 elementary, middle and high school students. In the outcome space stage, the students' responses to the assessment items were categorized based on the construct map. The categories were classified into 4 levels according to student ability and scores of 1-4 were given. In the measurement model stage, we applied the partial credit model of the Rasch model and compared whether the learning pathway created from the results of students' response coincides with the construct map. Based on the results of the research, we modified the construct map and finally created hypothetical learning progression on seasonal change. Finally, we proposed an orientation of curriculum amendment and effective teaching sequence for seasonal change.

• Korean Journal of Animal Reproduction
• /
• v.7 no.2
• /
• pp.57-71
• /
• 1983

1. Diluted chicken semen can be preserved at 2 to 5$^{\circ}C$ for 24 to 48 hr with resultant fertility of greater than 90% of that of fresh semen. Turkey semen can be preserved at 10 to 15$^{\circ}C$ for 6 to 24 hr and provide economical fertility. 2. Frozen chicken semen has given variable results; a 21 to 93% fertility ranges as compared to 92 to 94% expected with fresh semen. Highest fertility levels obtained with frozen turkey semen intravaginally inseminated have been 61 and 63% using DMSO and glycerol, respectively, as cryoprotectants. 3. The use of glycerol as a cryoprotectant reauires that its concentration in semen be reduced to less than 2% either by dialysis or centrifugation after thawing and before intravaginal insemination if optimal fertility is to be obtained. 4. The temperature at which cryoprotectants are added to semen and the time allowed for equilibration are important for subsequent fertility pre- and post-freezing. 5. The type of container used for packaging the semen, freeze or cooling rates, thaw rates and level of cryoprotectant all interact in affecting cell survival. 6. Plastic freeze straws as a packaging device for semen offers the following advantages: easy to handle, require minimal storage space, offer a wide range of freeze and thaw rates, and insemination can be made directly from them upon thawing. 7. Controlled slow cooling rates of 1 to 8$^{\circ}C$/min have thus far provided the best results for cooling chicken semen throught the transition phase change (liquid to solid) or critical temperature range of ＋5 to -20 or -35$^{\circ}C$. 8. Highest fertilities have been achieved with frozen chicken semen where a slow thaw rate (2。 to 5$^{\circ}C$) has been used regardless of the freeze rate. 9. To maintain a constant high level of fertility throughout a breeding season with frozen semen, a higher absolute number of spermatozoa must be inseminated (2 to 3 times as many) as compared to fresh semen since a, pp.oximately 50% are destroyed during processing and freezing. 10. The quality of semen may vary with season and age of the male. Such changes in sperm quality could be accentuated by storage effects. Thus, the correct number of spermatozoa may very well vary during the course of a breeding period. 11. As to time of insemination, it is best to avoid inseminating chicken hens within 1-2 hr after or 3-5 hr before oviposition; and turkey hens during or 7-10 hr before oviposition. 12. The physiological receptiveness of the oviduct at the time of insemination is a very important biological factor influencing fertility levels throughout the breeding season.

• Korean Journal of Plant Taxonomy
• /
• v.47 no.4
• /
• pp.289-296
• /
• 2017

The three self-compatible, terrestrial orchids Cephalanthera erecta, C. falcata, and C. longibracteata flower synchronously in sympatric populations. Cephalanthera erecta and C. longibracteata, which have white flowers that do not fully open, are predominantly autogamous, whereas the food-deceptive C. falcata, whose bright yellow flowers open completely, is predominantly outcrossing. The formation of hybrids rarely occurs between species owing to strong prepollination barriers (floral isolation). If these three species have evolved toward the prevention of interspecific hybridization, we can expect that the spatial distribution patterns of the three species would be characterized as spatial segregation (i.e., 'spatial repulsion') from each other. To test this prediction, we studied the three Cephalanthera species in sympatric populations showing coincident flowering within Yeonwhasan Provincial Park (YPP, Gyeongsangnam Province, South Korea). We found strong spatial aggregation in each population and spatial independence in the interspecific spatial distribution, differing from previous studies. We further hypothesize that Cephalanthera species in sympatry within YPP are distributed somewhat randomly in space, perhaps due to the sharing of similar mycorrhizal fungi.

• Korean Journal of Animal Reproduction
• /
• v.24 no.4
• /
• pp.407-417
• /
• 2000

The present study was to examine effects of various electrical stimulus treatments used for electro-fusion on the preimplantation development of bovine nuclear transfer (NT) embryos with fetal fibroblast cells. Fetal fibroblast cells were isolated from one fetus at day 45 of gestation in Holstein cow, and passaged 3 to 4 times before being transferred into enucleated oocytes. Single fibroblast cells were individually placed into the perivitelline space of enucleated oocytes by using a micromanipulator. At first, the fusion and developmental rates of reconstructed oocytes were compared between different electric stimulation conditions. When fusion of the reconstructed oocyte was induced by different electric pulse periods (15, 30 and 45 $\mu$sec) at a DC pulse of 1.8 kV/cm, 15 (45.5%, 120/264) or 30 $\mu$ sec group (43.9%, 106/241) showed a higher fusion rate than 45 $\mu$sec group (23.2%, 58/250, P＜0.05). However, no difference was detected in the development rate of the fused oocytes to blastocysts between groups. Next experiment was to examine the effects of different electrical field strengths (1.5, 1.8 and 2.1 kV/cm) for 15 $\mu$sec at electrofusion on in vitro development of the NT embryos. As results, there was no difference in the fusion and developmental rates of the NT embryos between electrical strength (P＞0.05). Finally, developmental competence of bovine NT embryos with somatic cells was compared with IVF-derived embryos. Of enucleated oocytes fused with fibroblast cells, 27.4% (75/274) developed to the blastocyst stage, which is similar to that (24.5%, 58/237) of IVF-derived embryos. However, mean nuclei number of NT blastocysts was smaller than that of IVF-derived blastocysts. Thus, we have established an optimal condition (1.8 kV/cm, 15 $\mu$sec) for electric fusion of bovine NT oocytes with somatic cells. The present study indicates that bovine reconstructed embryos with somatic cells normally develop to blastocyst stage in vitro, although having smaller nuclei numbers of blastocysts as compared to IVF-derived embryos.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.253-258
• /
• 2006

An empirical model of nitrous oxide emission from agricultural soil has been applied. It is based on the relationship between $N_2O$ and three soil parameters, soil mineral N(ammonium plus nitrate) content in the topsoil(0-15cm), soil water-field pore space, and soil temperature, determined in a study on clay loam and sandy loam at the pepper field in 2004. For comparisons between estimated and observed values of $N_2O$ emissions in the pepper field, it was investigated that $N_2O$ amount in the clay loam and sandy loam were overestimated as 12.2% and less estimated as 30%, respectively. However, $N_2O$ emissions were overestimated as 27.1% in the clay loam and 14.7% in the sandy loam from $N_2O$ gas samples collected once a week at the same time analyzing soil parameters. This modelling approach, based as it is well established and widely used soil measurements, has the potential to provide flux estimates from a much wider range of agricultural sites than would be possible by direct measurement of $N_2O$ emissions.