• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.489-495
• /
• 2023

Radiation shielding facilities are constructed in locations where diagnostic radiation generators are installed, with the aim of preventing exposure for patients and radiation workers. The purpose of this study is seek to compare and validate the trend of attenuation thickness of lead, the primary material in these radiation shielding facilities, at different maximum tube voltages by Monte Carlo simulations and measurement. We employed the Monte Carlo N-Particle 6 simulation code. Within this simulation, we set a lead shielding arrangement, where the distance between the source and the lead sheet was set at 100 cm and the field of view was set at 10 × 10 cm². Additionally, we varied the tube voltages to encompass 80, 100, 120, and 140 kVp. We calculated energy spectra for each respective tube voltage and applied them in the simulations. Lead thicknesses corresponding to attenuation rates of 50, 70, 90, and 95% were determined for tube voltages of 80, 100, 120, and 140 kVp. For 80 kVp, the calculated thicknesses for these attenuation rates were 0.03, 0.08, 0.21, and 0.33 mm, respectively. For 100 kVp, the values were 0.05, 0.12, 0.30, and 0.50 mm. Similarly, for 120 kVp, they were 0.06, 0.14, 0.38, and 0.56 mm. Lastly, at 140 kVp, the corresponding thicknesses were 0.08, 0.16, 0.42, and 0.61 mm. Measurements were conducted to validate the calculated lead thicknesses. The radiation generator employed was the GE Healthcare Discovery XR 656, and the dosimeter used was the IBA MagicMax. The experimental results showed that at 80 kVp, the attenuation rates for different thicknesses were 43.56, 70.33, 89.85, and 93.05%, respectively. Similarly, at 100 kVp, the rates were 52.49, 72.26, 86.31, and 92.17%. For 120 kVp, the attenuation rates were 48.26, 71.18, 87.30, and 91.56%. Lastly, at 140 kVp, they were measured 50.45, 68.75, 89.95, and 91.65%. Upon comparing the simulation and experimental results, it was confirmed that the differences between the two values were within an average of approximately 3%. These research findings serve to validate the reliability of Monte Carlo simulations and could be employed as fundamental data for future radiation shielding facility construction.

• Korean Journal of Social Welfare Studies
• /
• v.41 no.4
• /
• pp.225-246
• /
• 2010

The family environment children are exposed to growing up greatly influences their future potential and achievements. Previous findings show that changes in family structure during childhood, particularly those resulting from divorce or death, cause lasting negative consequence that affect the child physically, psychologically, economically, and socially. Unfortunately, single-parent households are becoming increasingly common in Korea, nearly doubling to more than a million cases in the last two decades. Existing domestic and international studies of this area tend to focus on the short-term effects of growing up in a single-parent household. In addition, these studies group their samples in ways that result in findings that may be too broad or are not necessarily an accurate representation of the subjects. This study attempts to address some of these shortcomings by focusing on the long-term effects of how changes in family structure early in children's lives affect achievement during their transition to adulthood. In addition, it takes into account the development cycle the child is in at the time of family restructuring, and what kind of long-term effects result from that. In this analysis, we find that there are several cases of statistically significantly differences in domain achievement depending on the developmental stage the child was in when the parental divorce or death occurred. The findings indicate that changes in family structure during the infant/toddler period influence health condition and depression, while changes in family structure during middle-childhood and adolescence do not. Meanwhile, changes in family structure during any point in the developmental stages have negative effects on educational attainment, with the severity of these negative effects depending on when the family changes occur. The negative effect on educational attainment is most prominent when a change in family structure occurs during the infant/toddler period, followed by adolescence, then middle-childhood.

• (The) Research of the performance art and culture
• /
• no.38
• /
• pp.71-109
• /
• 2019

In this study, succession aspects of direction structure and dancing were reviewed in Moondoong drum dance succeeded by Yong Bae Cho of Goseong Ogwangdae. Sung Rak Hong who succeeded to Moondoong drum dance before Yong Bae Cho directed only 'drum dance' mainly with Goodguri rhythm. While Sung Rak Hong succeeded, the drum of Moondoong Gwangdae became smaller, which was changed from drum before 1965, to semi-drum in 1966 and tabor in 1967 and thereafter. Yong Bae Cho succeeded to Moondoong drum dance since 1970, adding 'Moondoong dance' directing tabor at the floor together with 'drum dance' before August 1972 and directing Dutbaegi rhythm. From the first succession of Goseong Ogwangdae since the winter in 1974, obscene movements were disappeared, and the setting with Yangban and contents to sublimate resentment were added in Moondoong drum dance. These changes seemed to be affected by succession format of Tongyoung Ogwangdae Moondoong drum dance and Ok Jin Gong's idiot dance. There are succession patterns when reviewing Moondoong drum dance directed by Yong Bae Cho. In case of 'Moondoong' dance, repeated forms were succeeded including 'fixed dance'->'impromptu dance'->'jump' in center of three fixed dances. In case of 'drum dance,' repeated forms were succeeded including 'fixed dance'->'rolling tabor'->'concluding' -> 'impromptu dance'->'jump' in center of four fixed dances. In 'drum dance' by Yong Bae Cho, many parts of succeeded dance by Sung Rak Hong who was a prior successor were remained. After Yong Bae Cho's death, Jong Bok Heo summarized the dance with more completed order focusing on the structure of Moondoong drum dance succeeded by Yong Bae Cho. Since then, multiple scenes were added continuously including hobbled appearance by Jong Won Heo, happy scene eating barley and scene to catch tabor stick difficultly, by Chang Ryol Heo. Yong Bae Cho added 'Moondoong dance' to the prior works only with 'drum dance' and started adding the story with resentment. The direction structure summarized by Yong Bae Cho became the basic framework in which the following directors added the scenes very easily. Like this, Yong Bae Cho was an excellent director of Goseong Ogwangdae who inherited Moondoong drum dance from the previous generation to establish and develop to hand over the next generations.

• Journal of Korea Foundry Society
• /
• v.42 no.6
• /
• pp.337-346
• /
• 2022

In order to optimize the solution treatment conditions of Al-7Si-(0.3~0.5)Mg-(0~0.5)Cu alloys, a series of heat treatment experiments were conducted under various solution treatment times up to 7 hours at 545℃, followed by a microstructural analysis using optical microscopy, FE-SEM, and Brinell hardness measurements. Rapid coarsening of eutectic Si particles was observed in the alloys during the first 3 hours of solution treatment but the size of those Si particles did not change at longer solution treatment conditions. Meanwhile, the degree of spheroidisation of eutectic Si particles increased until the solution treatment time was increased up to 7 hours. Q-Al5Cu2Mg8Si6 andθ-Al2Cu were observed in as-cast Cu-containing Al alloys but the intermetallic compounds were dissolved completely after 3 hours of solution treatment at 545℃. Depending on the initial Mg composition of the Al alloys, π-Al8FeMg3Si either disappeared in the alloy with 0.3wt% of Mg content after 5 hours of solution treatment or remained in the alloy with 0.5wt% of Mg content after 7 hours of solution treatment time. Mg and Cu content in the primary-α phase of the Al alloys increased until the solution treatment time reached 5 hours, which was in accordance with the dissolution behavior of Mg or Cu-containing intermetallic compounds with respect to the solution treatment time. From the results of microstructural changes in the Al-7Si-Mg-Cu alloys during solution treatment, it was concluded that at least 5 hours of solution treatment at 545℃ is required to maximize the age hardening effect of the present Al alloys. The same optimal solution treatment conditions could also be derived from Brinell hardness values of the present Al-7Si-Mg-Cu alloys measured at different solution treatment conditions.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.651-661
• /
• 2022

Plants social network analysis, which combines plants society and social network analyses, is a new research method for understanding plants society. This study was conducted to investigate the relationship between species, using plant social network analysis targeting Taejongdae in Busan, and build basic data for management. Taejongdae, located in the warm temperate forest in Korea, is a representative coastal forest of Busan Metropolitan City, and the Pinus thunbergii-Eurya japonicacommunity is widely distributed. This study set up 100 quadrats (size of 100m²each) in Taejongdae to investigate the species that emerged and analyzed the interspecies association focusing on major species. Based on the results, a sociogram was created using the Gephi 0.9.2, and the network centrality and structure were analyzed. The results showed that the frequency of appearance was high in the order of P. thunbergii, E. japonica, Quercus serrata, Sorbus alnifolia, Ligustrum japonicum, and Styrax japonicusand that many evergreen broad-leaved trees appeared due to the environmental characteristics of the site. The plants social network of Taejongdae was composed of a small-scale network with 50 nodes and 172 links and was divided into 4 groups through modularization. The succession sere identified through a sociogram confirmed that the group that include P. thunbergiiand E. japonicawould progress to a deciduous broadleaf community dominated by Q. serrataand Carpinus tschonoskii, using hub nodes such as Prunus serrulataf. spontaneaand Toxicodendron trichocarpum. Another succession sere was highly likely to progress to an evergreen broad-leaved community dominated by Machilus thunbergiiand Neolitsea sericea, using M. thunbergiias a medium. In some areas, a transition to a deciduous broad-leaved community dominated by Celtis sinensis, Q. variabilisand Zelkova serratausing Lindera obtusilobaand C. sinensisas hub nodes was expected.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.5
• /
• pp.51-63
• /
• 2023

Numerical analysis was conducted to determine the effect of soil behavior by thawing and freezing of seasonal frozen soil on pile foundations. The analysis was performed using the finite element method (FEM) to simulate soil-pile interaction based on the atmosphere temperature change. Thermomechanical coupled modeling using FEM was applied with the temperature-dependent nonlinear properties of the frozen soil. The analysis model cases were applied to the MCR and HDP models to simulate the elastoplastic behavior of soil. The numerical analysis results were analyzed and compared with various conditions having different length and width sizes of the pile. The results of the numerical analysis showed t hat t he HDP model was relat ively passive, and t he aspect and magnit ude of t he bearing capacit y and displacement of the pile head were similar depending on the length and width of the pile conditions. The vertical displacement of the pile head by thawing and freezing of the ground showed a large variation in displacement for shorter length conditions. In the MCR model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0387 and 0.0277 m, respectively. In the HDP model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0367 and 0.0264 m, respectively. The results of the pile bearing capacity for the two elastoplastic models showed a larger difference in the width condition than the length condition of the pile, with a maximum of about 14.7% for the width L condition, a maximum of about 5.4% for M condition, and a maximum of about 5.3% for S condition. The significance of the effect on the displacement of the pile head and the bearing capacity depended on the pile-soil contact area, and the difference depended on the presence or absence of an active layer in the soil and its thickness.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.125-135
• /
• 2022

In this study, growth changes of the diameter at breast height (DBH), height, basal area, volume, and biomass of Korean white pine (Pinus koraiensis Siebold & Zucc.) on a plantation were examined via long-term monitoring. In addition, this study was performed to provide the basic data for timber production in line with DBH class by comparing the growth of the relative DBH size. Growth characteristics according to DBH class were analyzed by categorizing trees into five classes based on sorted DBH rankings: class I (1%-20%; upper 20%), class II (21%-40%), class III (41%-60%), class IV (61%-80%), class V (81%-100%; lower 20%). A total class (0%-100%) was also used. Total increment and mean annual increment (MAI) were calculated using data from nine measurements taken over 39 years. Tree characteristics based on average values and stand characteristics based on unit area per hectare were examined. According to the total increments of variables, the differences in DBH, basal area, volume, and biomass among classes I-V increased over time, whereas the height difference did not continually increase. According to MAI, the maximum DBH value was 0.92 cm·yr^-1 at age 23 in class I, whereas the maximum value in all trees was 0.69 cm·yr^-1 at age 17. The maximum value of height MAI for class I was 0.52 m·yr^-1 at age 23, whereas that for all trees was 0.49 m·yr^-1 at age 20. In terms of basal area, volume, and biomass growth at tree-and stand-level, the maximum MAI of class I and all trees was not observed during the measurement period. Therefore, additional long-term monitoring data are required to determine the maximum MAI of the variables.

• Korea Trade Review
• /
• v.42 no.5
• /
• pp.71-91
• /
• 2017

This purpose of this study is to examine how emotional intelligence has a moderating effect on the relationship between emotional labor and job burnout. To test the hypotheses, moderation analysis, mediation analysis and moderated mediation analysis were performed. Of the 1,500 self-report questionnaires distributed to franchise employees, 1,412 usable responses and utilized in the final analyses. The resoults show that emotional labor significantly affected job burnout, and job burnout completely mediated the effect of emotional labor on turnover intention. And emotional intelligence moderated the relationship between emotional labor and job burnout, suggesting that the emotional dissonance-job burnout relationship was stronger in the low emotional intelligence group than in the high emotional intelligence group. The results of this study provide some implications for Korean companies entering the Chinese franchise field. First, the mediating effects of "emotional labor → job burnout → turnover intention" and the effect of emotional labor on job burnout were mitigated by self-efficacy in Chinese franchise workers. And the self-efficacy of the employees was an important factor. The implication of this study is that self-efficacy, which is a controlling variable affecting emotional labor, job burnout, and turnover intention, is important, so Korean companies that enter the Chinese franchise employ employees with high self-efficacy and to develop and implement an employee education program that can enhance self-efficacy.

• Clean Technology
• /
• v.29 no.2
• /
• pp.126-134
• /
• 2023

Direct catalytic decomposition is a promising method for controlling the emission of nitrous oxide (N₂O) from the semiconductor and display industries. In this study, a γ-Al₂O₃ catalyst was developed to reduce N₂O emissions by a catalytic decomposition reaction. The γ-Al₂O₃ catalyst was prepared by an extrusion method using boehmite powder, and a N₂O decomposition test was performed using a catalyst reactor that was approximately 25.4 mm (1 in) in diameter packed with approximately 5 mm of catalysts. The N₂O decomposition tests were carried out with approximately 1% N₂O at 550 to 750 ℃, an ambient pressure, and a GHSV=1800-2000 h^-1. To confirm the N₂O decomposition properties and the effect of O₂ and steam on the N₂O decomposition, nitrogen, air, and air and steam were used as atmospheric gases. The catalytic decomposition tests showed that the 1% N₂O had almost completely disappeared at 700 ℃ in an N₂ atmosphere. However, air and steam decreased the conversion rate drastically. The long term stability test carried out under an N₂ atmosphere at 700 ℃ for 350 h showed that the N₂O conversion rate remained very stable, confirming no catalytic activity changes. From the results of the N₂O decomposition tests and long-term stability test, it is expected that the prepared γ-Al₂O₃ catalyst can be used to reduce N₂O emissions from several industries including the semiconductor, display, and nitric acid manufacturing industry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.179-188
• /
• 2023

Purpose. The purpose of this study was to evaluate the effect of surface treatments on the shear bond strength of two types of zirconia (3-TZP and 5Y-PSZ) with resin cement. Materials and methods. Two different types of zirconia specimens with a fully sintered size of 14.0×14.0×2.0 mm³ were prepared, polished with 400, 600, and 800 grit silicon carbide paper, and buried in epoxy resin. They were classified into four groups each control, sandblasting, primer, and sandblasting & primer. Cylindrical resin adhered to the surface-treated zirconia with resin cement. It was stored in distilled water (37℃) for 24 hours, and a shear bond strength test was performed. The normality of the experimental group was confirmed with the Kolmogorov-Smirnov & Shapiro-Wilk test. The interaction and statistical difference were analyzed using a two-way ANOVA. A post-hoc analysis was performed using Dunnett T3. Results. As a result of two-way ANOVA, there was no significant difference in shear bonding strength between zirconia types (P > .05), but there was a significant correlation in the sandblasting, primer, and alumina sandblasting & primer group (P < .05). Dunnett T3 post-test showed that, regardless of the type of zirconia, shear bonding strength was sandblasting & primer > Primer > sandblasting > control group (P < .05). Conclusion. There was no difference in shear bond strength between the types of zirconia. The highest shear bond strength was shown when the mechanical and chemical treatments of the zirconia surface was performed simultaneously.