• Atmosphere
• /
• v.12 no.4
• /
• pp.20-42
• /
• 2002

Based on the "Mid to Long Term Plan for Space Development", a project to launch COMeS (Communication, Oceanography, and Meteorological Satellite) into the geostationary orbit is undergoing. Accordingly, KMA (Korea Meteorological Administration) has defined the meteorological missions and prepared the user requirements to fulfill the missions. To make a realistic user requirements, we prepared a first draft based on the ideal meteorological products derivable from a geostationary platform and sent the RFI (request for information) to the sensor manufacturers. Based on the responses to the RFI and other considerations, we revised the user requirement to be a realistic plan for the 2008 launch of the satellite. This manuscript introduces the revised user requirements briefly. The major mission defined in the revised user requirement is the augmentation of the detection and prediction ability of the severe weather phenomena, especially around the Korean Peninsula. The required payload is an enhanced Imager, which includes the major observation channels of the current geostationary sounder. To derive the required meteorological products from the Imager, at least 12 channels are required with the optimum of 16 channels. The minimum 12 channels are 6 wavelength bands used for current geostationary satellite, and additional channels in two visible bands, a near infrared band, two water vapor bands and one ozone absorption band. From these enhanced channel observation, we are going to derive and utilize the information of water vapor, stability index, wind field, and analysis of special weather phenomena such as the yellow sand event in addition to the standard derived products from the current geostationary Imager data. For a better temporal coverage, the Imager is required to acquire the full disk data within 15 minutes and to have the rapid scan mode for the limited area coverage. The required thresholds of spatial resolutions are 1 km and 2 km for visible and infrared channels, respectively, while the target resolutions are 0.5 km and 1 km.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.493-502
• /
• 2006

The slaughter weight (wt) is a most important economic factor in swine roduction. The present study was undertaken to determine if it is feasible to increase the slaughter wt of finishing pigs to 130kg without significantly affecting the growth efficiency and carcass quality. One hundred and sixty gilts and 160 barrows born from lean-type Yorkshire×Landrace (YL)-dam and Duroc (D)-sire lines, which are most widely used for terminal breeding for pork production in Gyeongsangnam-do, were randomly allocated into 16 pens under a 2 (sex)×2 (slaughter wt; 110 vs. 130kg) factorial arrangement of treatments. The animals were fed ad libitum a diet containing 3,200kcal DE/kg and 15.5% crude protein. After slaughter at the predetermined wt, yields of trimmed primal cuts and physicochemical characteristics of the longissimus dorsi muscle (LD) were measured or analyzed. Average daily gain was greater (P<0.01) in barrows than in gilts (0.86 vs. 0.79kg), but it was not different between the 110- and 130-kg slaughter wt groups (P>0.05). Backfat thickness was greater in the 130- vs. 110-kg group in both sexes (gilts: 21.6 vs. 17.6 mm, barrows: 25.1 vs. 20.8 mm). The yield percentage of belly was greater in barrows than in gilts (21.2 vs. 20.5%) and also in the 130-kg vs. 110-kg group (21.4 vs. 20.2%). Major physicochemical characteristics of LD including the color, percentage of 48-h drip loss, 24-h pH and percentages of crude protein and fat were not influenced by slaughter wt. Marginal profit of the 130-kg vs. 110-kg market pig was approximately 󰠏20,000 won/head, which resulted primarily from the heavy carcass weight of the former exceeding the upper limit of the A- or B-grade. However, if it had not been for the carcass weight limit of the current grading system, a 130-kg market pig would have had a potential marginal profit greater than 20,000 won. Results suggest that slaughter wt of lean-line finishing pigs can be increased to 130kg without significantly compromising the growth efficiency and carcass quality and accordingly, the upper weight limit of the ‘good-grade’ carcass needs to be increased or abolished to accommodate the larger market pigs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.49-54
• /
• 2017

We collected and reared Theragra chalcogramma walleye pollock brood-stock for use in natural spawning tests and undertook to obtain domestic pollock via fertilized egg capture, development of fertilized eggs, and absorption of yolk sac after hatching. Whole pollock were caught with trammel and set nets and immediately placed in a deep-sea water tank. Adults were the most common pollock age group (43.0%; n = 86) among the 254 pollock captured in March 2014 with 57.9% (n = 147) being captured off Southern Gosung, Korea. The main spawning period of pollock is February (spawning phase of 91% of pollock). From the deep-sea tank, we collected 1640 mL of naturally fertilized eggs (~820,000 eggs) from 12 spawning events occurring between February 4 and 22 2015. The floating/ live eggs were maintained in deep-sea water tanks at $5.5{\pm}0.2^{\circ}C$. Egg size was $1.5{\pm}0.03mm$. Six hours after fertilization the eggs were at the 2 cell stage, and the eggs hatched approximately 340 hours after collection. At hatching, larval length and yolk sac area were $5.2{\pm}0.25mm$ and $9.5{\pm}1.00mm^2$ (100%), respectively. Four days after hatching, the yolk sac area was $2.2{\pm}0.53mm^2$ ($23.1{\pm}5.55%$). This is the first report of collection of naturally fertilized eggs from pollock and their subsequent hatching while held in an indoor deep-sea water tank. The results suggest that such collection could assist in the recovery of pollock resources and the possibility of domestic rearing of cultivated larvae.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.2
• /
• pp.87-94
• /
• 1979

In order to study the water pollution in Suyeong Bay, Busan, some chemical constituents were determined at 25 stations in the neap tides on 9 Aug. 1977 and spring tides on 30 Aug. 1977. Range and mean values of the constituents in the spring tides are as follows: $pH\;6.54\~8.06,\;7.54;$ electrical conductivity $0.413\~0.481\times10^5\;\mu\mho/cm,\;0.467\times10^5\;\mu\mho/cm;\;transparency\;0.2\~5.5m,\;2.2m;$ turbidity $1\~60ppm$, 14ppm, chlorosity $15.20\~18.11g/\ell,\;17.67g/\ell;$ fluoride ion $0.94\~1.03ppm$, 0.99ppm; dissolved oxygen $0.17\~7.60ppm$, 4.77ppm; sulfide $0\~0.46ppm$, 0.07ppm; chemical oxygen demand $1.20\~40.74ppm$, 6.11ppm; ammonia-nitrogen $0.060\~0.520ppm$, 0.180ppm; nitrite-nitrogen $0.001\~0.026ppm$, 0.009ppm; nitrate-nitrogen $0\~0.037ppm$, 0.014ppm; phosphate-phosphorus $0.002\~0.261ppm$, 0.050ppm; n-Hexane soluble $0.5\~5.4ppm$, 2.1ppm ; iron $1.0\~104.11\;ppb$, 24.15ppb ; copper $0\~27.45ppb$, 4.19ppb; lead $0\~2.50ppb$, 0.92ppb; zinc $0\~5.15ppb$, 1.47ppb ; cadmium $0\~0.26ppb$, 0.04ppb; and mercury $0.05\~0.37ppb$, 0.11ppb respectively. The variations of the contents of the chemical constituents in the spring tides were larger than in the neap tides. The contents of COD, sulfide, nutrient salts and heavy metals were the highest in the estuary of Suyeong River, and decreased in order of off Kwangan-Ri region, outer Bay and off Haeun-Dae region. The water quality in Suyeong Bay was particularly shown that the concentrations of COO, iron, copper and mercury were higher than those of other coastal aseas and deficiency in dissolved oxygen was observed in some parte of Suyeong Bay. In consideration of the relationship between the chlorosity and the concentrations of nutrient salts, COD and total heavy metals, water pollution of this area is considered due to the inflow of Suyeong River which was extremely polluted by sewage and industrial wastewaters.

• Korean Security Journal
• /
• no.62
• /
• pp.35-63
• /
• 2020

As the frequency and intensity of catastrophic disasters increase, there is widespread public sentiment that government capacity for disaster response and recovery is fundamentally limited, and that the involvement of civil society and the private sector is ever more vital. That is, in order to strengthen national disaster response capacity, governments need to build disaster systems that are more participatory and function through the channels of civil society, rather than continuing themselves to bear sole responsibility for these "wicked problems." With the advancement of smart mobile technology and social media, government and society as a whole have been called upon to apply these new information and communication technologies to address the current shortcomings of government-led disaster management. As illustrated in such catastrophic disasters as the 2011 Tohoku earthquake and tsunami in Japan, the 2010 Haitian earthquake, and Hurricane Katrina in the United States in 2005, the realization of participatory potential of smart technologies for better disaster response has enabled citizen participation via new smart technologies during disasters and resulted in positive impact on the management of such disasters. In this context, this study focuses on the South Korean context, and aims to analyze Korean government officials' readiness for public participation using smart technologies. On this basis, it aims to offer policy suggestions aimed at promoting smart technology-enabled citizen participation. For this purpose, it proposes a particular model, termed SMART (System, Motivation, Ability, Response, and Technology).

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.1
• /
• pp.87-102
• /
• 2015

This study attempts to introduce the methodology for accounting real-time population distribution in the urban areas. For the purpose, we utilize the media user's time-space information from the media users' media diaries in the media panel survey databases. We analyze the space-time population rate for each activity space related with everyday urban lifes. Seoul has been selected as a case study area, since space-time information are relatively rich there, and thus the comparisons are available. The space-time population rates have been verified by the comparative analysis with the T-card results. We propose a real time population measurement method by combination of the space-time population rate with geographical data. The real time population of each activity space at each dong in Seoul has been calculated by multiplying the space-time population rates to the numbers of employer of three categories of activity spaces(residential, working, and commercial). By utilizing GIS, we visualize the results of two time points (3AM and 3PM) and then analyze the spacio-temporal characteristics of real time population distribution in Seoul. The Day time population distribution pattern shows strong relationships with the distribution of business and commercial activities, while the night time population distribution pattern can be explained by resident population distribution almost perfectly.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.2
• /
• pp.185-195
• /
• 2017

Two byproducts, brewer's spent grain (BSG; germinated rice and malt) and brewer's spent material (BSM; Achyranthes japonica Nakai), were collected during the manufacture of pilsner beer using A. japonica Nakai and germinated rice. Water extracts of BSG and BSM were prepared at different temperatures ($25^{\circ}C$, $60^{\circ}C$, and $100^{\circ}C$) for 5 h, and their nutritional and functional properties were investigated. ${\gamma}-Aminobutyric$ acid (GABA), saponin, and niacin contents were higher in extracts prepared at $60^{\circ}C$ for more than 3 h than the other extracts, whereas total polyphenol content, DPPH radical scavenging activity, and reducing power were higher in samples extracted at $100^{\circ}C$ for 1 h compared to the other ones. Overall, water extraction at $60^{\circ}C$ for 3 h was desirable to effectively collect both nutritional and functional components from BSG and BSM. Under these conditions, BSM extracts showed 4~18 times high niacin and folate contents, 1.4 times high total phenolic content, and 11~60 times high antioxidant activities compared to BSG extracts. This study shows that pilsner beer byproducts would be good sources of health beneficial components, especially GABA, saponin, water soluble vitamins, and polyphenolics.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.77-84
• /
• 2000

In order to understand the chemical binding forms of Cd in terms of its binding strength in wood, the radial distribution of it through dendroanalysis and its different chemical fractions in trunk wood of mature red pine(Pinus densiflora L.) trees grown in a relatively unpolluted area, in Kangwon-Province, were examined. Total Cd concentration in stem wood was determined by dry digestion and $H_2O$ and 0.01 M solutions of citric acid, malic acid, $CaCl_2$, $MgCl_2$, $Na_2EDTA$ were used as extracting solutions for Cd. Extracting efficiencies of applied solutions were expressed as % of Cd concentration extracted by $Na_2EDTA$ which extracted all Cd instead of Cd total concentration. Total concentration of Cd decreased from the innermost rings near pith towards the the outermost rings near cambium. Especially through the transition zone this tendency was observed clearly. $H_2O$ was the least effective extractant of Cd, then extracting efficiency increased in the order $MgCl_2$ < $CaCl_2$ $Na_2EDTA$ (extracted all Cd). According to the radial position, extracting efficiency of Cd was ranging from 7 to 30% by $H_2O$ and even from 60 to 95% by citric acid. The Cd extracting efficiencies of $H_2O$ and organic acids increased continuously from the stem center to outermost annual rings, whereas salts showed somewhat different tendency, suddenly decreasing near the outermost ring. The results are discussed with regard to the different chemical binding forms of Cd and the mobility of Cd in wood and comparable with ones in previous studies on Pinus sylvestris and Quercus patraea. According to the results, usefulness of radial distribution pattern of Cd in pine tree trunks for retrosective biomonitoring is questioned.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.845-859
• /
• 2020

Climate change and recent heat waves have drawn public attention toward other environmental issues, such as water pollution in the form of algal blooms, chemical leaks, and oil spills. Water pollution by the leakage of chemicals may severely affect human health as well as contaminate the air, water, and soil and cause discoloration or death of crops that come in contact with these chemicals. Chemicals that may spill into water streams are often colorless and water-soluble, which makes it difficult to determine whether the water is polluted using the naked eye. When a chemical spill occurs, it is usually detected through a simple contact detection device by installing sensors at locations where leakage is likely to occur. The drawback with the approach using contact detection sensors is that it relies heavily on the skill of field workers. Moreover, these sensors are installed at a limited number of locations, so spill detection is not possible in areas where they are not installed. Recently hyperspectral images have been used to identify land cover and vegetation and to determine water quality by analyzing the inherent spectral characteristics of these materials. While hyperspectral sensors can potentially be used to detect chemical substances, there is currently a lack of research on the detection of chemicals in water streams using hyperspectral sensors. Therefore, this study utilized remote sensing techniques and the latest sensor technology to overcome the limitations of contact detection technology in detecting the leakage of hazardous chemical into aquatic systems. In this study, we aimed to determine whether 18 types of hazardous chemicals could be individually classified using hyperspectral image. To this end, we obtained hyperspectral images of each chemical to establish a spectral library. We expect that future studies will expand the spectral library database for hazardous chemicals and that verification of its application in water streams will be conducted so that it can be applied to real-time monitoring to facilitate rapid detection and response when a chemical spill has occurred.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.253-260
• /
• 2006

As media and product became variety, the propensity of the people is be coming various. From diversity, there we could search for some popularity is called 'the mania.' When Mania takes shape, the product will being longer even masses in these days only have short-term life. Also there are hundreds of animations that has short-term life whom people forgot everyday they watch. However, the animations could lasting its value which has the Mania. This thesis is a studies on the constitution of Mania from animation 'Fullmetal Alchemist's Character The BONES had made. We can learn that the audience were not just like the animation, but get crazy for it by comparing Japanese animation industry in those days; before it has been shrinking and manufacturing various contents from Fullmetal Alchemist means there is enough consumtions. There are many reasons to form Mania group, but specially the character symbols at the works as a whole. From this study is to know a cause of how the animation 'Fullmetal Alchemist' made huge Mania group, and significance value of the work those group left.