• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.151-157
• /
• 2005

A one-dimensional numerical model was developed to simulate vertical profiles of electron acceptors and their reduced species in benthic sediments. The model accounted for microbial degradation of organic matter and subsequent chemical reactions of interest using stoichiometric relationships. Depending on the dominant electron acceptors utilized by microorganisms, the benthic sediments were assumed to be vertically subdivided into six zones: (1) aerobic respiration, (2) denitrification, (3) manganese reduction, (4) iron reduction, (5) sulfate reduction, and (6) methanogenesis. The utilizations of electron acceptors in the biologically mediated oxidation of organic matter were represented by Monod-type expression. The mass balance equations formulated for the reactive transport of organic matter, electron acceptors, and their corresponding reduced species in the sediments were solved utilizing an iterative multistep numerical method. The ability of model to simulate a freshwater sediments system was tested by comparing simulation results against published data obtained from lake sediments. The simulation results reasonably agreed with field measurements for most species, except for ammonia. This result showed that the C/N ratio (106/16) in the sediments is lower than what the Redfield formula prescribes. Since accurate estimates of vertical profiles of electron acceptors and their reduced species are important to determine the mobility and bioavailability of trace metals in the sediments, the model has potential application to assess the stability of selected trace metals in the sediments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3615-3620
• /
• 2010

This study is development of UV-cured coating compounds which has more improved anti-stain and anti-biosis, about surface prevention of PVC Tile. We added water-soluble anti-static and anti-microbial agent to the resin. The process has prevented electrostatic and bacterial contagious disease. The result, which added 15wt% of water-soluble anti-static and 1wt% anti-microbial agent and coated with No.12 Bar-coater, coating composition had optimum surface property. It appear electric resistance($10^9{\Omega}/cm^2$), anti-stain (Ink Test, Dust Test), anti-biosis (99.99%), and adhesive power(100%).

• Composites Research
• /
• v.35 no.4
• /
• pp.255-260
• /
• 2022

Lightweight hydrant tanks increase the amount of water that can be carried by fire trucks, resulting in longer water spray times during the initial firefighting process, which can minimize human and property damages. In this study, the applicability of carbon-fiber-reinforced polymer (CFRP) composites as a material for lightweight hydrant tanks was investigated. In particular, the resin for manufacturing CFRP hydrant tanks must meet various requirements, such as excellent mechanical properties, formability, and dimensional stability. In order to identify a resin that satisfies these conditions, five commercially available resins, including epoxy(KFR-120V), unsaturated polyesters(G-650, HG-3689BT, LSP8020), vinyl ester(KRF-1031) were selected as candidates, and their characteristics were analyzed to investigate the suitability for manufacturing a CFRP hydrant tank. Based on the analyses, KRF-1031 exhibited the most suitable properties for hydrant tanks. Particularly, CFRP with KRF-1031 exhibited successful results for thermal stability and elution tests.

• Journal of Korean Society of Forest Science
• /
• v.60 no.1
• /
• pp.51-57
• /
• 1983

Properties and glue shear strength of each water soluble rues-phenol copolymer adhesive and phenolic resin adhesive were examined as a high temperature curing binder through the manufacture of plywood made of Kapur veneer. The former has different molar ratio and the latter was made from different catalyst method. The results are summarized as follows: 1) Specific gravities of air dried plywood manufactured from each adhesive ranged from 0.67 to 0.82 and their moisture contents met the K.S. standard 2) In dry and wet shear strength, adhesives with 60 percent of non volatile content showed higher values than those with 50 percent except phenolic resin. Urea-phenol copolymer resin with 20 percent of phenol content exhibited the highest, and that with 70 percent the lowest. Filling effect of wood flour on the bonding strength is great in urea-phenol copolymer resin with more than 50 percent of phenol content, especially significant in 50 percent of non volatile content including alkali catalyst phenolic resin. Alkali and acid catalyst methods were the highest among the adhesive manufacture methods. In wet strength, urea resin belongs to the lowest group. 3) In glue shear strength after boiling and drying test, no method for manufacturing phenolic formaldehyde resin adhesive was stronger than alkali and acid catalyst methods. Phenolic resin made from alkali catalyst method needs a wood flour filler to improve the bonding quality. Urea-phenol copolymer resin with 10 percent of phenol content showed the reasonable water resistance.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.1
• /
• pp.30-34
• /
• 1988

In roastal fish farms the farmers, especialy engaging in dealing with the floating cage culture, going to know about relationships between holding capacity and water quality in cage. Some of water quality managers and specialists studing physiological ecology understand that the key of water quality management concerned fish farming is budget of dissolved oxygen. This paper deals with oxygen budget in floating cage of the yellow tail farms at southern coastal area in Korea. The sampling station is located at Konli-Do fish farm near Chungmu, and the data is collected for 24 hours from 3:00 p.m. 8th September 1987. In result, the needed oxygen coming after the consumption by the rearing fish had been supplied with the tide current exchange, the sum of oxygen produced by phytoplankton photosynthesis and diffused from atmosphere are no more that $43\%$ for the needs of sea water consumption included respiration of planktons and decomposition of organic matters. The optimum holding capacity of cage is possible to compute with the calculation of minimum diurnal water exchange rate $[Qin{\cdot}V^{-1}\;(C-\bar{c})]$ through net mesh of cage.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.45-52
• /
• 1974

This study was carried out to examine the subsitution possibility into water soluble amino resins instead of phenolic resin as a sizing material for the strength increase on the wet forming hardboard. The properties of hardboard, manufactured with amino-resins based urea, melamine, formaline, and methanol which were low priced domestic products, were examined in comparison with those of hardboard treated with phenolic resin. In this study by the results and discussions, it may be summarized as follows: 1. Amino-resins are able to be substituted for the phenolic resin as a good sizing material for strength increase in the manufacture of wet forming hardboard. Under the considerations of economic advantages and properties of hardboard, modified urea-melamine resin was given a best results. 2. The specific gravities of hardboard that were treated with phenolic resin was equal to that treated with modified amino type resin, and in case of urea-melamine resin, the specific gravity value were lowest among them. 3. The results of moisture contents were satisfied the standard which calls for 13 percent or below. There were no differences in moisture contents between hardboards, treated with melamine resin and modified urea-melamine resin but phenolic resin. The moisture contents of hardboard treated with phenolic resin was shown the lowest. 4. The water absorption of hardboard treated with phenolic resin was greater than those treated with amino resins, and to satisfy the standard of water resistance, the treatment of 2 percent paraffin wax emulsion was needed in this case. There were no differences in water absorptions between hardboards, treated with melamine resin and modified urea-melamine resin. To satisfy the standard of water resistance in this case the treatment of 1 percent paraffin wax emulsion was shown good results. 5. The differences among the flexural strength in using tested three adhesives were significant. The flexural strength were shown the signification by order of melamine resin, modified urea-melamine resin, and phenolic resin. In all cases to satisfy the standard of flexural strength, the treatment of 3 percent sizing materials for strength increase was needed.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.335-340
• /
• 2010

Urethane resin applicable for the first transcription of historical site and transcription of soil layer were synthesized in order to replace the imported urethane resin, NS-10. Comparing to the NS-10, the urethane polymers showed similar penetration to wet soil and formed a stable layer of polyurethane during progress working the peeling off the polyurethane pre-product from epoxy surface of final product. The urethane resins used for the first transcription of historical site improved tensile strength, which is consistent with that of NS-10. In addition the urethane resin for transcription of soil layer was supplied with hardness that have a also same strong point as like NS-10. This property is advantage due to simplifying the transcription work of soil layer in backward. When we tested to the real ground soil as well as experimentation compressed soil with use these synthesis urethane resin, we ca get the satisfying result in penetration property and stability and these properties evaluated the resins as an advanced product serving better convenience for worker.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.2
• /
• pp.67-74
• /
• 2003

Barrier ribs for PDP(plasma display panel) are commonly utilized to have uniform height and width and to prevent opical crosstalk between adjacent cells. The requirements for such barrier ribs are uniform height and shape, low outgassing rate and low porosity, high aspect ratio, and fine resolution. In this study, we are studied about that to make efficiency of material and high quality barrier ribs for PDP. As a result, could got high barrier ribs of $140{\mu}m$ evenly in 1th phenomenon using watersoluble UV curing resin and know that flatness of upper part is also very good.

• Journal of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.233-238
• /
• 1985

The non-porous and porous polystyrene divinylbenzene copolymers were prepared by the suspension polymerization method. The non-porous aminated polystyrene divinylbenzene, N-APSTDVB and the porous aminated polystyrene divinylbenzene, P-APSTDVB of 50∼100mesh size weakly basic anion exchanger were synthesized by chloromethylation followed by amination with methylamine. The functional groups of these synthesized anion exchangers were confirmed by their infrared spectra. The maximum capacity of these exchangers was 4.86meq/g. Pore volume and pore spectra were determined with a mercury porosimeter. The pore volume of P-PSTDVB increased with increasing X$_{diluent}$ at 30% of divinylbenzene. However, the pore volume of P-PSTDVB increased with increasing volume percent of divinylbenzene at constant mole fraction of diluent, X$_{diluent}$ of 0.5. The pore volume of synthesized copolymer and anion exchanger at 8% divinylbenzene and 0.5X$_{heptane}$ decreased as follows; P-PSTDVB 〉P-APSTDVB 〉N-PSTDVB. This result was attributed to the possibility that the pore volume were reduced by amination reactions. The distribution coefficients of boric acid on the N-APSTDVB anion exchanger in various concentrations of alcohol water solutions showed that as alcohol concentration increased, the distribution coefficients values decreased due to the reduced concentration of H$_2$BO$_3^-$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.329-329
• /
• 2020

일정규모 이상의 공공건축물에 대하여 빗물이용시설의 설치는 의무화 되어있으나, 빗물이용시설의 용량결정의 관한 기준은 부처별, 기관별로 상이하고, 동일한 기관의 기준내에서도 적용방법에 따라 용량 결정의 기준 범위는 광범위 하다. 본 연구에서는 대전광역시에 위치한 토지주택연구원을 대상으로 빗물이용시설의 물수지 분석을 수행하고, 그에 따른 편익을 용량 및 집수면적별로 산정하여 최적용량 결정을 위한 가이드를 제시하였다. 빗물이용시설의 편익은 우수유출 저감, 폭염 저감, 미세먼지 저감, 조경용수 사용으로 설정하였으며, 대전광역시의 2019년 실제 강우사상을 대상으로 물수지 분석을 수행하였다. 빗물이용시설은 일반적으로 B/C가 낮게 산정되어 경제성 측면에서는 부정적인 평가를 받아왔다. 빗물이용시설의 경제성은 빗물이용시설의 용량에 따른 빗물의 활용정도를 계산하여 산정하였으나, 실제 빗물이용시설의 경제성에 가장 큰 영향을 미치는 요소는 강우패턴과 빗물의 용도에 따른 사용량이다. 강우에 의한 공급량과 빗물의 소비량이 1차적인 요소이고, 2차적으로는 공급량을 수용할 수 있는 정도인 빗물이용시설의 집수면적과 용량, 소비되는 빗물의 용도별 편익에 따라 빗물이용시설의 경제성이 결정된다.빗물이용시설의 설치를 위한 선행단계로 빗물의 사용용도와 그에 따른 사용량을 설정하고, 각 용도에 따라 편익을 설정한 후 용량별 집수면적별 B/C를 산정한다. 이렇게 작성된 B/C 테이블을 현장에 제공하고, 현장여건에 맞추어 공사감독자가 용량을 결정한다면, 기존의 광범위한 용량기준의 문제점을 해결하고, 효율적인 빗물이용시설 용량 결정에 도움이 될 수 있을 것이다.