• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.1-5
• /
• 2008

The object of this experimental and simulation study is to find out heated temperature and range from the Oxy-acetylene cutting point of reinforcing bars (D10, D13, D16, D19, D22, D25 for each cases of SD3O and SD40) in room temperature ($20{\sim}22^{\circ}C$). This cutting is under the condition that a skilled worker cut one bar per a time. The results are these. 1. The temperature of the point 1 of reinforcing bars cut with Oxy-acetylene cutter is over 700$^{\circ}C$ under 1000$^{\circ}C$, but the temperature of the point 2 of reinforcing bars cut with Oxy-acetylene cutter is under 200$^{\circ}C$ 2. The temperature of the point that is apart 2cm from Oxy-acetylene cutting point is not over 200$^{\circ}C$, so reinforcing bars has not transform to be brittle. The results of simulation for temperatures of the each point apart from Oxy-acetylene cutting point is similar to upper experimental results.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.21-25
• /
• 1997

우수한 세라믹스 제조를 위해서는 작은 입자지름, 좁은 입도분포, 구형의 입자형태, dopant와 matrix가 균일한 고용체를 갖고, 응집입자가 없으며 고순도인 원료 분말의 제조가 선행되어야 한다. 이를 위하여 본 연구에서는 수열 합성법을 이용하여$\alpha$-Al$_2$O$_3$, $\alpha$-SiO$_2$, PZT, PSZT, BTO등의 미세분말을 제조하는 공정에서 반응온도, 광화제의 양과 종류, 반응시간, 출발물질의 양과 종류, 전처리공정, 교반공정 등이 평균입자지름과 결정성 및 입도분포에 미치는 영향을 조사하였다. 그결과 미세분말의 종류에 관계없이 반응온도, 반응시간, 성장기질의 농도, 종자결정의 농도 등이 증가할수록 평균입경은 커지며, 광화제의 농도가 증가할수록 평균 입자지름이 작아지고, 광화제의 농도가 종자결정의 농도가 증가할수록 입도분포가 좁아짐을 알 수 있었다. 특히 $\alpha$-SiO$_2$에 대해 수열합성실험으로부터 평균입자지름과 수열합성의 조업변수간의 특성방정식을 얻었다.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.339-345
• /
• 2020

This study used a real-scale model experiment to reproduce internal fires in residential buildings such as a multi-dwelling unit, in order to prevent damage caused by tens of thousands of fires witnessed each year and to take measures to cope with them. For experimental conditions, different opening sizes were applied to measure and analyze the heating temperature of the exterior wall. Results drawn are as follow : On top of this, the experimental conditions had whether to install shading and put a shading length differently, before measuring and analyzing the heating temperature of the exterior wall. Subsequent results were drawn as shown below. Based on the maximum temperature, the temperature was lowered as much as around 90℃ at 150mm, around 150℃ or over at 300mm and over 175℃ at 450mm. It also turned out that the difference in maximum temperature dropped by around 180℃ or over. This indicated that the shading installation works well in lowering flame temperature generated by fire spread of the exterior wall.

• Korea Journal of Geothermal Energy
• /
• v.3 no.2
• /
• pp.3-10
• /
• 2007

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.685-688
• /
• 2003

BaTiO$_3$ 분말을 Ba(OH)$_2$ㆍ8$H_2O$와 아나타제형의 TiO$_2$ㆍx$H_2O$를 이용하여 수열합성법에 의해 제조하였다. Autoclave 반응기를 이용한 본 실험의 경우, BaTiO$_3$ 분말을 생성하기 위해 반응온도, 용질의 농도 등과 같이 BaTiO$_3$ 합성에 관여하는 반응변수를 변화시켜, 각각의 실험조건이 어떠한 영향을 미치는지를 조사하였다 수열합성법에 의해 합성된 BaTiO$_3$의 전화율은 온도와 농도 증가에 따라 높아지는 현상을 보였으며, 열역학적으로 계산된 최대 전화율에 접근하였다. 또한 반응온도와 농도의 증가에 의해 생성된 BaTiO$_3$는 균일한 입도 분포와 구형에 가까운 형상을 나타내었다. 따라서 농도를 높이는 조건이 전화율과 생산성을 모두 높일 수 있는 방법이라는 것을 확인할 수 있었다.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.261-267
• /
• 2020

This study used a real-scale model experiment to reproduce internal fires in residential buildings such as a multi-dwelling unit, in order to prevent damage caused by tens of thousands of fires witnessed each year and to take measures to cope with them. For experimental conditions, different opening sizes were applied to measure and analyze the heating temperature of the exterior wall. Results drawn are as following: when the experiment was conducted with opening sizes(horizontal length) each at 2,000mm, 1,600mm, and 1,400mm, the flashover occurred at 630 seconds, 505 seconds and 510 seconds, respectively. Also, the total heating time, in proportion to this, came to 815 seconds, 713 seconds and 721 seconds. The maximum heating temperature of the exterior wall by the opening size reached 282.4℃ at 2,000mm, 382.9℃ at 1,600mm, and 423.8℃ at 1,400mm. This represented that as the opening size gets smaller, the heating temperature of the exterior wall by fire spread becomes higher.

• Clean Technology
• /
• v.16 no.4
• /
• pp.254-257
• /
• 2010

[ $Mg(OH)_2$ ]slurry was prepared by using natural mineral brucite exploited from Liaoning province in China, and its de-SOx efficiency was examined. The effect of difference in particle size distribution of brucite and activation by hydrothermal treatment were investigated. The de-$SO_2$ efficiency of a finely-milled brucite sample below 1000 mesh with narrow particle size distribution was higher than that of the sample below 80 mesh. On the other hand, the de-$SO_2$ efficiency of brucite sample below 80 meshes was significantly improved by the hydrothermal treatment at 363 K tor 3 h.

• Solar Energy
• /
• v.12 no.1
• /
• pp.95-102
• /
• 1992

A small scale solar collector system composed of a Fresnel lens of $0.5m^2$ area as a solar concentrator and a compact fluidized-bed solar receiver was developed. Performance and temperature distribution in the fluidized bed receiver were measured using SiC for particles and air for working fluid. The maximum gas temperature was attained up to 1250K at this moment. In this study, energy efficiency achieved by the present experiment was high for the small scale solar collector system and compact receiver.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2001.11a
• /
• pp.219-224
• /
• 2001

BaTiO$_3$분말을 barium hydroxide, meta titan acid를 이용하여 광화제 첨가 없이 열수처리에 의한 탈수(dehysration) 및 재경정화(recrystallization)과정으로 수열합성법에 의해 제조하였다. Autoclave 반응기를 이용한 실험의 경우, BaTiO$_3$분말을 생성하기 위한 최적 온도 및 반응시간은 각각 18$0^{\circ}C$, 4시간으로 확인되었으며, 이 때 생성된 BaTiO$_3$분말의 크기는 0.1~0.2$\mu\textrm{m}$로 입도분포가 양호하였다. 그리고, 광하제의 영향을 살펴보면 광화제를 사용하지 않았을 경우가 1.0MK KOH를 첨가하였을 때보다 결정성이 우수하게 나타났다. 이와같은 결과로부터 수열합성조건에서 Ba와 Ti의 출발물질이 [-OH]기를 가지고 있는 경우, 원료의 용해도를 증가시키고 출발물질의 수산기(hydroxide)의 생성이 용이하여 광화제의 첨가 없이도 BaTiO$_3$분말을 합성할 수 있음에 따라 공정단순화를 통해ㅐ 에너지 절감 효과를 가져올 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.47-58
• /
• 1997

In this study single crystalline corundum ($\alpha$-$Al_2O_3$) powders were prepared from gibbsite using hydrothermal growing processes. Addition of a mineralizer and the characteristics of solid substances were investigated to find their effects on the size distribution and crystalllnity of products. Experimental results showed that as the concentration of potassium hydroxide (KOH), a mineralizer, the particle size of corundum powders became larger at lower reaction temperatures. However, the size of corundum powders became smaller as the concentration of gibbsite increased in the feedstock. The hydrothermal synthetic conditions are also strongly dependent on the properties of hydrothermal solutions. Corundum powders which have the weight mean particle size of 1~10 $\mu\textrm{m}$ with shapes of hexagonal were prepared in this experiment.