• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.677-682
• /
• 2015

In this paper, we investigated the effect of light on the performance of the receiver system noise and external noise added from the ever-present influence in general optical system. And calculated the reception sensitivity of the receiver at the time of off-keying transmission - from the optical transmission system in consideration of the case that the photo detector has a quantum yield of less than one-one. Not less than 50 it was confirmed that it is possible to configure the low power system is calculated and compared with the case where less than 300 the receiver sensitivity of the optical system to maintain the standard error probability. However, even if these values were considered, and the preamplifier in the receiver, considering a case of using a low-output light source, so that a heavy burden in the value less than the actual system installation, using the light source having less than the output, as shown in Figure 3, the results that were obtained also may be used.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.03a
• /
• pp.183-186
• /
• 1999

가상현실은 현실에 구애받지 않고 상사의 세계를 현실과 같이 만들어 내어 인체의 모든 감각기관이 인위적으로 창조된 세계에 몰입됨으로써 현실에 있는 것처럼 느낄 수 있는 사이버스페이스이다. 본 논문에서는 청취자의 머리움직임에 따라 머리 추적기로부터 수신된 정보로서 음향의 방향감 간의 상관모델을 구성하여 시스템내의 S/W 모듈에 전달하는 인터페이스를 구축하고, 이를 토대로 머리 움직임 변화에 부합되는 실감음향을 생성하고, 영상도 함께 동기화하여 몰입감을 증대시키는 실감음향 인터페이스에 대한 개발에 대해서 논의한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.1
• /
• pp.55-59
• /
• 2004

전파의 특성을 측정하기 위해서 사용되는 디지털 주파수 측정기는 안테나를 통해서 수신기에 입력된 고주파 신호의 주파수를 측정하는 장치로써, 전파 정보 수집 장비의 중요한 구성품 중 하나이다. 이 분야는 고주파 기술이 발달된 미국이나 유럽에서 대부분의 장비를 개발해 왔으나 금번에 설계 제작된 주파수 측정기는 온도보상 등을 고려하여 정밀하게 설계제작 함으로써 수신 감도 -70㏈m에서 펄스폭이 l00㎱ 이상인 펄스 신호와 지속파(CW)신호의 주파수를 정확하게 측정하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.3
• /
• pp.200-209
• /
• 2015

An underwater sound surveillance system detects and tracks enemy ships in real-time using hydrophone arrays, in which seabed-mounted sensor arrays play a pivotal role. In this paper the conceptual design of seabed-mounted, cylindrical hydrophone arrays for use in shallow coastal waters is performed via finite element calculations. To stabilize the receiving characteristics under the ocean ambient noise, a technique for whitening the ambient noise spectrum using a metal baffle is proposed. Optimization of the array configuration is performed to achieve the directivity in the vertical and azimuthal directions. And the effects of the sonar dome shape and material on the structural vibration and sound scattering properties are studied. It is demonstrated that a robust hydrophone array, having a sensitivity deviation less than 4 dB over the frequency range of interest, can be obtained through the whitening of the ambient noise, the optimization of the array configuration, and the design of acoustically transparent sonar domes.

• Korean Journal of Optics and Photonics
• /
• v.19 no.5
• /
• pp.343-348
• /
• 2008

This study was carried out to commercialize FTTH by developing a burst mode optical receiver for E-PON. The optical receiver was manufactured by minimizing the capacitance of a photodiode to improve sensitivity for meeting 10, 20 km OLT Rx standard of E-PON at the transmission speed of 1.25 Gb/s. When bit-error ratio is $10^{-12}$ and PRBS is $2^5-1$, sensitivity is -26 dBm, loud/soft ratio is 23 dB. Both preamble time and guard time were set to 102.4 ns (128 bit). After comparing a photodiode whose capacitance is 0.53 pF with another photodiode whose capacitance has been minimized to 0.26 pF, we could see that sensitivity improved to 0.7 dBm and so did bandwidth to 190 MHz of burst mode for the optical receiver manufactured by the photodiode whose capacitance is 0.26 pF.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.77-82
• /
• 1996

In this paper an identification method is presented to obtain the equivalent electric model of a sandwitch type piezoelectric transducer. Unknown parameters related to the equivalent circuit are identified by solving a nonlinear optimization problem which can minimize an error between the experimental and analytical admittances in air. The proposed method is applied to an example transducer. The validity of equivalent circuit model is demonstrated by the comparison between the experimental measurements and analytical calculations of transmitting voltage response(TVR) and receiving voltage response(RVS).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11c
• /
• pp.2199-2202
• /
• 2002

모바일 광고는 무선 디바이스의 발달로 인해 새로운 광고 수단 및 마케팅 수단이 되었다. 많은 이용자들이 무선 인터넷을 사용하고 있으며, 앞으로도 사용자는 증가할 것으로 보여진다. 그러나 무선 서비스는 단순한 SMS 형태의 서비스가 대부분이며, 이러한 SMS를 수신하는 이용자들은 자신이 원하지 않는 광고성 메시지의 수신 대해 상당한 거부감을 가지고 있는 것으로 조사되었다. 따라서 이러한 문제를 해결할 수 있는 광고 중계 모델 "ATPA" (Advertisement Transport Processing Architecture)을 제안한다. "ATPA"는 필터링 기법을 응용하여 고객 지향적인 모바일 광고 시스템으로서 이용자는 자신에게 적합한 광고의 수신하게 하고, 광고주는 이용자의 특성에 따른 차별적인 광고를 제공할 수 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.41-46
• /
• 2012

This paper suggested that the frequency adaptive antenna matching network design between AP and WLAN(Wireless Local Area Network) terminal for improving performance. The internet data service of the WLAN terminal is communicated through the AP and AP broadcasts the beacon signal including the assigned frequency channel. at that time the antenna matching network path is controlled beacon information after the WLAN terminal searching and synchronization a beacon information. and then the WLAN terminal communicate with AP. controlling the antenna matching network path according to channel information, The WLAN terminal is expected to improve RF output power and sensitivity performance. The VSWR(Voltage Standing Wave Ratio) performance of the designed antenna matching network is measured to about 1.1 ~ 1.2 and then it is operated by the channel information of the AP.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.215-220
• /
• 2013

In this paper, the signal reception environment of the satellite communications was analyzed on urban, suburban and rural environment. The correct analysis of received environment is very important in the satellite communications because the presence of various attenuation factors. Analyze attenuation factor through the simulation and that apply to each receiving environment. The urban and suburban various received sensitivity is determined according to building height and density. Moreover, attenuation occurs in rural areas due to the mountainous and vegetation. In this paper, we analysis of variety receiving environment according to movement of the ground station and the satellites can be utilized to provide stable multimedia services.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.38-47
• /
• 2008

The most commonly used location recognition system is the GPS-based approach. However, the GPS is inefficient for an indoor or urban area where high buildings shield the satellite signals. To overcome this problem, this paper propose the indoor positioning method using wavelet and neural network. The basic idea of proposed method is estimated the location using the received signal strength from wireless APs installed in the indoor environment. Because of the received signal strength of wireless radio signal is fluctuated by the environment factors, a feature that is strength of signal noise and error and express the time and frequency domain is need. Therefore, this paper is used the wavelet coefficient as the feature. And the neural network is used for estimate the location. The experiment results indicate 94.6% an location recognition rate.