• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.464-466
• /
• 2018

In this paper, a dense cellular network is considered in which each base station equipped with multiple antennas simultaneously communicates with multiple single-antenna users. Based on limited feedback, each user feeds back its quantized channel state information (CSI) to its associated transmitter, and the transmitter broadcasts multiple data streams prepared for the scheduled users using a space-division multiple access scheme. As the amount of CSI is limited at the transmitter, the downlink throughput increases with the number feedback bits. However, the increased number of feedback bits requires the correspondingly increased amount of uplink resources. Thus, an appropriate balance between the downlink throughput and the uplink resource usage should be considered in realistic systems. A net spectral efficiency defined in this context is used in this paper, and the optimal number of feedback bits that maximizes the net spectral efficiency is analyzed. This paper particularly focuses on the case when the received signal power is much smaller than the noise power.

• The Magazine of the IEIE
• /
• v.35 no.9
• /
• pp.15-24
• /
• 2008

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4A
• /
• pp.193-199
• /
• 2003

In this paper, the performance of uplink WCDMA systems was analyzed using the SGA (Standard Gaussian Approximation) method and the SIGA(Simplified Improved Gaussian Approximation) method adopted for the performance analysis in conventional DS-CDMA systems. The performance of bandlimited WCDMA systems was analyzed using the SGA and SIGA method, and computer simulations were performed in AWGN environments having multiple access interference. It was shown that the performance analysis of uplink bandlimited WCDMA systems using the SIGa method may be very efficient through various computer simulations with verying spreading factors, roll-off factors, and signal-to-noise ratios.

• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.222-228
• /
• 2006

In this paper, we propose a receive diversity method for orthogonal frequency division multiplexing (OFDM) systems with cochannel interference. In the method, combining is done in the frequency domain by using the subcarrier based maximum ratio combining (MRC) method. For MRC, we exploit the power of cochannel interference as well as the power of channel noise. The accuracy of the power estimate of interference plus noise is enhanced by averaging the initial estimates over the correlated subchannels where the coherency between the subchannel gains comes from the limited delay spread of the channel. Simulation results show that the proposed method yields 2-3.5dB gain of signal to noise ratio compared to the conventional MRC method and less than 1 dB difference to the ideal case.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.807-809
• /
• 2004

본 논문에서는 광 부호분할다중접속(OCDMA) 시스템 구현을 위해 각 가입자의 시간ㆍ파장영역의 2차원 부호할당 및 변경이 가능하고 다중 사용자의 암호화된 데이터의 동시 전송과 모든 수신 노드에서 복원이 가능한 OCDMA 시스템 구조를 제안하였다. 또한 기존의 이중 광 하드리미터를 제한증폭기와 AND 게이트를 사용하여 이중 전기 하드리미터를 구현하였다. 서로 다른 파장을 갖는 레이저 다이오드와 FPGA를 이용한 전기 상관기로서 시간과 파장영역의 2차원으로 부호 다중화된 동시 가입자 신호에서 특정 가입자의 신호를 복원하였고, 제한 검출기와 위치 검출기의 이중 전기 하드리미터를 이용하여 MAI로 인한 기존 OCDMA 시스템에서의 식별력 저하와 비트오류 문제를 해결하였다.

• The Magazine of the IEIE
• /
• v.38 no.1
• /
• pp.50-55
• /
• 2011

초음파 시스템은 진단 영상뿐만 아니라 초음파 수술과 같이 초음파를 사용하여 특정 세포를 제거하거나, 또는 일반적인 수술을 위한 가이드 영상을 제공하는 등 그 활용이 증가되고 있다. 반면, 기존 초음파 시스템은 크기가 커서 클리닉 센터나 종합병원 등에서 이동성 및 공간 효율성이 낮고 환자에 관한 주치의들의 진단 활동 반경이 매우 제한적이라는 불편함을 초래한다. 본 논문은 서버 클라이언트 기반의 무선 초음파 진단 시스템에서 프루브가 수신한 초음파 반사 신호를 무선으로 실시간 전송하기 위해서 압축센싱과 산술 부호의 연접을 통한 손실 압축 알고리즘을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.769-774
• /
• 2006

Based on the performance of a cooperative diversity with selection combining in Rayleigh fading, the power control range of a relay node is investigated. Also the effect of the power-limited relay node to the system performance is investigated. If the average signal-to-noise ratio(SNR) of each signal path is equal, the single relay cooperative diversity is obtained 13.5dB gain at the outage probability of $1{\times}10^{-3}$ in Rayleigh fading. We noticed that the limited power of a relay node severely degrades the system performance. Therefore the node with limited power in ad-hoc network is not recommended as a relay node in cooperative diversity system.

• Journal of Advanced Navigation Technology
• /
• v.12 no.3
• /
• pp.239-244
• /
• 2008

In this paper refer to the digital multimedia mobile phone with the combination of broadcasting and the communication the unity of wire and wireless solution that can provide the UMA(Unlicensed Mobile Access) function is added. In UNC(Universal Naming Convention) in the case of CAS(Conditional Access System) is supported, the device(mobile phone) is authenticated through AP and then following the method of broadcasting signal the user can view the wanted contents as long as they want and for this matter the service charge system are proposed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.494-502
• /
• 2001

GPS(Global Positioning System) and GLONASS(GLObal Navigation Satellite System) are basic technologies providing the information of the position and the time, and they have various applications such as navigation, survey, control, and so on. However, each GPS and GLONASS has limited number of visible satellites, and, from the view of strategy, it is undesirable to be heavily dependent on only one system. Thus, GPS/GLONASS combined receiver became required to obtain more precise navigation and system stability. In this paper, the RF front end of GPS/GLONASS combined receiver was fabricated on 130$\times$80 $\textrm{mm}^2$ PCB(Printed Circuit Board), and its system application was shown finally one chip possibility of GLONASS receiver is studied.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.642-646
• /
• 2004

시스템 패킷 인터페이스 4레벨 2단계(System Packet Interface Leve1 4 Phase 2)는 10Gbps 이더넷 응용뿐만 아니라, OC-192 대역폭의 ATM 및 POS를 통한 패킷 또는 셀 전송을 위한 물리계층과 링크계층 소자간의 인터페이스이다. 본 논문에서는 시스템 패킷 인터페이스 4레벨 2단계(SPI-4.2)에 대한 연구와 C언어를 이용한 성능평가를 토대로 모듈을 VHDL언어를 이용하여 설계하였다. 성능평가시 확인된 짧은 패킷이 유입되었을 때 PCW와 다음 PCW의 거리를 16바이트 이상을 유지하기 위해 ICW가 삽입되어 많은 오버헤드를 발생시켰다. 작은 패킷이 유입되었을 때 오버헤드를 최소화하기 위해 ICW생성을 최대한 제한하게 설계하여 짧은 패킷 유입시의 오버헤드를 감소하는 SPI-4.2 인터페이스 수신부 모듈을 설계하였다. 설계한 모듈은 라인당 720Mbps를 지원하여 총 대역폭이 11.52Gb/s의 전송률을 나타내어 더욱 안정적으로 패킷을 인터페이스 할 수 있다. XilinxISE 5.1i 툴을 이용하여 VHDL언어로 설계하였고, Model_SIM 5.6a를 이용하여 시뮬레이션 하였다. SPI-4.2 인터페이스 모듈은 기가비트/테라비트 라우터, 광학 크로스바 스위치 및 SONET/SDH 기반의 수신 시스템에서 라인카드로 사용할 경우 적합할 것으로 사료된다.