• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.105-113
• /
• 2009

In this paper, a vehicle antenna for AM, FM, TDMB, GPS systems was designed and implemented. AM antenna loaded into small space of shark shape was designed by ferrite turn style antenna. For the FM and TDMB antenna, folded monopole antenna which helical is folded was applied. GPS antenna for achieving characteristics both bandwidth and gain improvement was designed microstrip patch that has air substrate and fractal structure. Receiving signal strengths by the measurement were presented for the AM, FM and TDMB antenna. AM signal strength was -65.7dBm, this strength is almost as same conventional pole antenna as -63.4dBm. It can be replaced conventional pole or glass antenna by the studied antenna. Signal strengths for FM and TDMB were -55.66 and -43.50dBm at center frequency, they are 5~10dB higher than conventional antenna. Measurements of bandwidth and gain for the GPS antenna showed 135 MHz under VSWR 2 : 1 and 4.31dBi, gains over GPS band were 3~5dB higher than ceramic patch antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2233-2240
• /
• 2007

This paper presents the measured path loss exponents and standard deviations using measured data at 60GHz to analyze the propagation characteristics of millimeter wave bands having great demand for picocellular communications. In addition the angle of arrival(AOA) were measured to analyze the arrival direction of muitipath waves affecting the received signal strength. As results of analysis, the pathloss exponents in each environment are found to be lower than 2 for free space pathloss exponent. They were determined with the qualities of bottom materials affecting signal strength. The angles of arrival by multipath waves were different with the circumference structures between transmitter and receiver. That is, the multipath waves excluding direct and ground reflected wave were difficult to find in wide space such a gymnasium and playground, however the wall multipath waves were found to arrive at receiver in the corridor. The multipath waves at 60GHz can be known to hardly affect to the received signal strength because of weak signals compared with direct wave.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.23-30
• /
• 2011

In the wireless sensor network(WSN), the detection of precise location of sensor nodes is essential for efficiently utilizing the sensing data acquired from sensor nodes. Among various location methods, the received signal strength (RSS) based localization scheme is mostly preferable in many applications since it can be easily implemented without any additional hardware cost. Since the RSS localization method is mainly effected by radio channel between two nodes, outlier data can be included in the received signal strength measurement specially when some obstacles move around the link between nodes. The outlier data can have bad effect on estimating the distance between two nodes such that it can cause location errors. In this paper, we propose a RSS-based localization method using Robust Statistic and Gaussian filter algorithm for enhancing the accuracy of RSS-based localization. In the proposed algorithm, the outlier data can be eliminated from samples by using the Robust Statistics as well as the Gaussian filter such that the accuracy of localization can be achieved. Through simulation, it is shown that the proposed algorithm can increase the accuracy of localization and is more robust to non gaussian noise channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.8
• /
• pp.643-650
• /
• 2014

Recently, the wireless communication applications are studied in various environment by the development of short range communication system like wireless sensor networks. This paper presents the analysis of localization schemes for ship application using received signal strength. The localization schemes using received signal strength from wireless networks are classified under two methods, which are Range based method and Range free method. Range based methods estimate the location with least square estimation based on estimated distance using path-loss model. Range free methods estimated the location with the information of anchor nodes linked to target. Simulation results show the appropriate localization scheme for each cabin environments based on the empirical path-loss model in warship's internal space.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1149-1157
• /
• 1994

In this case of the mobile communication of vehicles with satellite, the signal at attenuation is due to roadside trees. To analyze this signal attenuation, a roadside tree was modeled as different obstacles of rectangular type and then using Fresnel and Kirchhoff diffraction theory, a formula was derived for signal intensity variation caused by the roadside tree model. The signal attenuation of a roadside tree model was obtained by numerical analysis with variation of the elevation angle, the position and distance between a receiver and a transmitter, and these were compared with experimental results. The results of comparison between theoretical and experimental values show, as expected, the good agreement of the signal attenuation trend.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.100-106
• /
• 2011

Radio Frequency (RF) signal fluctuates dynamically in wireless communication environments, where this fluctuation is severe especially in vehicular environments. Automatic Gain Control (AGC) is critical in wireless communications to establish reliable communication links and compensate the received signal fluctuation. In this paper, we introduce a simple and novel AGC scheme which uses both Received Signal Strength Indicator (RSSI) and analog-to digital converter (ADC) signals. Performance enhancement of the proposed AGC scheme is verified with practical measurements including simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.698-705
• /
• 2010

A vehicle antenna for AM, FM, TDMB, GPS systems was designed and implemented. Omnidirectional AM antenna was designed by ferrite turn style antenna. For the FM and TDMB antenna, folded monopole antenna which helical is folded was applied. GPS antenna for the bandwidth achievement was designed by trapezoidal microstrip patch that has air substrate. Receiving signal strengths by the measurement were presented for the AM, FM and TDMB antenna. AM signal strength was -65.7 dBm, this strength is almost as same conventional pole antenna as -63.4 dBm. It can be replaced conventional pole or glass antenna by the studied antenna. Signal strengths for FM and TDMB were -55.66 and -43.50 dBm at center frequency, they are 5~10 dB higher than conventional antenna. Measurements of bandwidth and gain for the GPS antenna showed 135 MHz under VSWR 2 : 1 and 4.31 dBi, gains over GPS band were 3~5 dB higher than ceramic patch antenna.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.45-50
• /
• 1996

천해에서 얻은 잔향음신호를 역추정 알고리즘으로 분석하여 자료수집 당시의 환경 변수인 해상풍의 세기와 해저면의 상태를 추정하는 방법에 대하여 기술하였다. 소오나 시스템과 잔향음신호 수집 당시의 환경 자료를 알고 있다면 음원에서 방사된 음파가 해수면에 처음 도달하는 시간과 수평입사각을 multipath eigenray model에 의해서 계산할 수 있고 이 정보를 이용하여 수신된 잔향음 신호를 분석하여 해수면에 의한 산란잔향음 준위와 시간을 계산할 수 있다. 해수면 후방산란강도는 수평입사각, 음원의 주파수, 해상풍의 세기 등에 의해 특징지어지며 계산된 잔향음 준위로부터 소오나 방정식을 이용하여 후방산란강도를 알아낼 수 있다. 이 후방산란강도를 입력자료로 하여 Method of Small Perturbation이론과 Chapman과 Harris가 유도한 실험식을 사용하여 입력된 값과 일치할 때까지 후방산란강도를 계산하여 이때의 환경변수를 찾아내었다. 한편 해저면 잔향음신호는 표준화된 후방산란강도값들의 PDF를 만들어 그 분포양상을 분석하였다. 본 논문에서 사용된 알고리즘의 검증을 위해서는 보다 다양한 환경하에서 실시된 많은 음향괸측자료를 필요로 한다.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.6-11
• /
• 2016

In this paper, we studied a spectrum sensing algorithm for the efficient use of available spectrum in RF energy harvesting system combined with backscatter communication. We first looked for white spaces and then, selected low fading channel among white spaces using spectrum sensing algorithm at a transmitter. The transmitter employing the algorithm alleviates signal interference and improves the received signal strength indication through signals transmitted by low fading channel. The proposed RF energy harvesting system combined with backscatter communication is used the transmitter employing the algorithm. As a result of computer simulations, we can find the performance improvements of RF energy harvesting, BER of backscatter communication, and the received signal strength per distance of backscatter tag.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.316-319
• /
• 2008

Most of campus vehicle management systems, so far, have simple functions such as managing vehicle in/out or issuing parking tickets. Recently some of them use RFID tags to count total numbers of cars in the campus, excluding exact parking position management. In this paper we propose a new campus vehicle management system using wireless sensor network location management scheme. This system adopts RSSI based location management method with some performance improvement technique. According to the experimental result, this proposed scheme can be used to implement an effective campus vehicle management system.