• Journal of the Korean Institute of Gas
• /
• v.10 no.3 s.32
• /
• pp.60-64
• /
• 2006

Explosion range and explosion characteristics of by product gas from carbon black manufacturing process were studied. About 75% of the by product gas were composed with water vapour and nitrogen. And the combustible component in the gas were hydrogen, methane, acetylene and carbon mono-oxide. Because of the combustible components in the by product gas there are explosion hazards in the gas handling process. Explosion range of the gas by experiment was from 17.1% to 70.7% and the value has considerable difference with the calculated value from Lechatelier law. Explosion pressure of the gas was $5.4kg/cm^2$ and the average explosion pressure rise rate was $39.2kg/cm^2/s$. Based on the experimental result we can expect that a explosion or fire accident during the handling the gas can make a severe loss, therefore there should be a explosion prevention or protection measures in the gas handling process.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.56-61
• /
• 2023

The plant is an important facility as a infrastructure, and ensuring safety against possible accidents such as gas leaks and explosions must be considered in the design. However, there is little study on explosion pressure in plants for reasons such as economic feasibility, and overpressure data on this field is insufficient. In this study, an experimental design plan considering the explosion scenario that may occur in the plant was presented, and the explosion pressure was confirmed through an explosion experiment. Hydrogen-methane mixed gas was used as a combustible material, and the effect of confinement and congestion on overpressure was studied. The effect of overlapping pressure waves during deflagration and the turbulence effect by congested pipes are discussed. The results of this study can be used as input data in various safety designs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1094-1103
• /
• 2008

A fuel specific detonation wave in a pipe propagates with a predictable wave velocity. This internal detonation wave speed determines the level of flexural wave excitation of pipes and the possibility of resonant response leading to a large displacement. In this paper, we present particular solutions of displacements and the resonance conditions for internally loaded pipe structures. These analytical results are compared to numerical simulations obtained using a hydrocode(multi-material blast wave analysis tool). We expect to identify potential explosion hazards in the general power industries.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.610-619
• /
• 2022

Hydrogen is emerging as an alternative fuel for eco-friendly ships because it reacts with oxygen to produce electrical energy and only water as a by-product. However, unlike regular fossil fuels, hydrogen has a material with a high risk of explosion due to its low ignition point and high flammability range. In order to safely use hydrogen in ships, it is an essential task to study the flow characteristics of hydrogen leakage and diffusion need to be studied. In this study, a numerical analysis was performed on the effect of leakage, ventilation, etc. on ventilation performance when hydrogen leaks in an enclosed space such as inside a ship. ANSYS CFX ver 18.1, a commercial CFD software, was used for numerical analysis. The leakage rate was changed to 1 q, 2 q, and 3 q at 1 q = 1 g/s, the ventilation rate was changed to 1 Q, 2 Q and 3 Q at 1 Q = 0.91 m/s, and the ventilation method was changed to type I, type II, type III to analyze the ventilation performance was analyzed. As the amount of leakage increased from 1 q to 3 q, the HMF in the storage room was about 2.4 to 3.0 times higher. Furthermore, the amount of ventilation to reduce the risk of explosion should be at least 2 Q, and it was established that type III was the most suitable method for the formation of negative pressure inside the hydrogen tank storage room.

• Journal of the KSME
• /
• v.44 no.1
• /
• pp.27-27
• /
• 2004

미국 국방부 소속 육군차량사업부(National A Automotive Center)는 대체에너지를 이용한 군용 차량 개발을 위해 Michigan 주 Rochester Hills에 위치한 E Energy Conversion Devices(ECD) 사와 일부 기술 개발 에 대한 기술 제휴를 한다고 발표했다. 국방부는 태양전 지와 수소를 연료로 사용하는 대체에너지 차량을 개발하 기 위해 ECD에 1단계 연구에 필요한 연구비를 지원했다. 이번 연구에는 연료전지를사용한차량개발을위해 5 500,$\omega$0달러가 투자되는데, Texaco Ovollic Hydrogen S Systems(TOHC)의 고체 휴대용 수소 연료와 채충천 (refueling) 시스탬이 주요 개발 목표로 설정됐다. ECD의 역할은 최근 개발된 Toyota Prius에 시범 적으로 장착된 저압 고체형 수소 저장 시스템의 기술을 군용 차량에 알맞게 전환시키는 것이다. TOHC와 ECD가 개발한 고체형 수소 보관 시스댐은 고압을 요구하는 연료전지 차량의 수소 저 장 시스템이 갖고 있는 많은 문제점들을 해결할 수 있을 것으로 기대되는 연료전지를 이용한 엔진 개발 중 최신 기술이다. 특히 전투 상황에서 차량이 폭발하기 쉬운 수소 저장 탱크를 장착한 채 전 장으로간다는 것은적에게 노출 될 경우자살과마찬가지인 치명적인 피해를 입을수 있다. 이 프로젝트의 개요를 살펴보면, 수소 저장 시스템은 적어도 약 lOkg의 수소를 적은 용적 내에 낮은 압력에서 안전하게 고체 상태로 저장할 수 있다. 이 고체 저장 용기는 하루에 두 번 1.7kg의 수소를 10분 이내에 재급유할 수 있다. 수소는대부분고압가스형태나저온액체 형태로보관된다. 기체나액체 형태의 수소는 연료전 지에 사용되기에는 적합하지 않은 점이 많다. Ovonie 수소 저장 방법은 수소를 저압 고체 형태 ( (metal hydride)로 보관하는 방법으로, 고압 기체나 저온 액체가 갖고 있는 많은 문제점들을 해결 할수있다. 그림을 참조하면 고체 형태의 수소 보관 방법이 다른 보관 방법에 비교해 단위 체적당 최고 6배 많은수소질량을보관할수 있다. 이 고체 형태의 보관방법은수소가적절한합금과평형 압력 이 상의 환경에 놓일 경우 합금에 홉착되는 현상을 이용하고 있다. 수소를 흡수한 합금은 새로운 특성 을 가진 metal hydride로 변하게 된다. 이 과정 에서 열이 부산물로 발생한다. 반대로 수소를 metal hydride로부터 분리시키기 위해서는 합금을 가열해야 한다.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.32-38
• /
• 2011

As the using rate of an explosive gas has been increased in the industrial site, the regional residents adjacent to the site as well as the site workers have frequently fallen into a dangerous situation. Damage caused by accident in the process using hydrogen gas is not confined only to the relevant process, but also is linked to a large scale of fire or explosion and it bring about heavy casualties. Therefore, personnel in charge should investigate the kinds and causes of the accident, forecast the scale of damage and also, shall establish and manage safety countermeasures. We, in Anti-Calamity Research Center, forecasted the scope of danger if break out a fire or/and explosion in hydrogen gas facilities of MLCC firing process. We selected piping leak accident, which is the most frequent accident case based on an actual analysis of accident data occurred. We select and apply piping leak accident which is the most frequent case based on an actual accident data as a model of damage forecasting scenario caused by accident. A jet fire breaks out if hydrogen gas leaks through pipe size of 10 mm ${\Phi}$ under pressure of 120 bar, and in case of $4kw/m^2$ of radiation level, the radiation heat can produce an effect on up to distance of maximum 12.45 meter. Herein, we are going to recommend safety security and countermeasures for improvement through forecasting of accident damages.

• Journal of the Korean Institute of Gas
• /
• v.26 no.6
• /
• pp.65-75
• /
• 2022

Recently, the possibility of fire and explosion due to hydrogen leakage and the resulting risk are increasing since the operating pressure of the electrolysis increases. This study performed the hazardous area classification in accordance with KS C IEC 60079-10-1 and KGS GC101 in consideration of the general operating conditions of the electrolysis. In addition, in order to achieve a To Non-hazardous, an appropriate ventilation rate was estimated to maintain a concentration of less than 25 % of the lower explosive limit. As a result, it was reviewed that the electrolysis is classified as an hazardous area when only natural ventilation is applied, and a huge amount of ventilation is required to classify it as a non-hazardous area.

• 한국가스학회:학술대회논문집
• /
• 2006.11a
• /
• pp.157-162
• /
• 2006

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.140-145
• /
• 2000

BTX는 석유화학곧업에서 생산되는 방향족탄화수소 화합물의 주요 생산품목인 Benzene, Toluene, Xylene을 일컫는 말로서 석유화학공정에서 간단히 줄여서 쓰는 용어이다. 벤젠, 톨루엔, 크실렌 등은 페인트 희석제로 쓰이는 유기용매의 주성분들이며, 인체에 중독성을 나타내는 유해물질이기도 하며 소방법상에서는 인화성액체인 4류 위험물로 취급하고 있다.(중략)

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.106-112
• /
• 1997

This study measured the ignition limits of methane-air, propane-air, ethylene-air, and hydrogen-air mixture gases by discharge spark of D.C. power resistive circuit. The used experimental device is the IEC type spark ignition test apparatus, it consists of explosion chamber and supply -exhaust system of mixture gas. Mixture gases (methane-air, propane-air, ethylene-air, and hydrogen-air) were put into explosion chamber of IEC type spark ignition test apparatus, then it was confirmed whether ignition was made by 3,200 times of discharge spark between tungsten electrode and cadmium electrode. The ignition limits were found by increasing or decreasing the value of current. For the exact experiment, the ignition sensitivity was calibrated before and after the experiment in each condition. The ignition limits were found by changing the value of concentration of each gas-air mixture in D.C. 24 [V] resistive circuit. As the result of experiment, it was found that the minimum ignition limit currents exist at the value of methane-air 8.3 [$Vol\%$], propane-air 5.25[$Vol\%$], ethylene-air 7.8 [$Vol\%$], and hydrogen-air 21[$Vol\%$] mixture gases. For each the minimum ignition concentration of gases, the relationships between voltage and minimum ignition current were found. The results are as follows. - The minimum ignition limits are decreasing in the order of methane, propane, ethylene, and hydrogen. - The value of ignition current is inversely proportional to the value of source voltage. - The minimum ignition limit currents increase sharply at more than 2 [A]. The reason is caused by overheating the electrode.