• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.35-40
• /
• 1999

Sr substituted materials for some barium in M-type barium ferrite powder and Co-Ti substituted Sr-Ba hexagonal ferrite powder were prepared by citrate sol-gel method and 2 MOE sol-gel method these hexaferrite particles were reduced for 1hr in the hydrogen gas. The reduction temperatures were varied in the range of 250 $^{\circ}C$ to 500 $^{\circ}C$. X-ray diffraction patterns were measured using diffractometer with Cu $K_{\Alhpa}$ radiation. Mossbauer absorption spectra were measured with a constant acceleration spectrometer. We have focused on studying the origin of increasing $M_s$ by M$\"{o}$ssbauer spectroscopy. Ferrite particles which were sintered at 105$0^{\circ}C$ were found to be typical magnetoplumbite structure and single phase. XRD patterns with varying the reduction temperatures in $Sr_{0.5}Ba_{0.5}Fe_{10}O_{19}$ indicates ferrites particles become composite hexaferrites containing $\alpha$-Fe at T_{red}=350 \;$^{\circ}C$$. On the otherhand, it was found that $Co^{2+}$ ions and $Ti^{4+}$ ions in $Sr_{0.7}Ba_{0.3}Fe_{10}CoTiO_{19}$ prevent from changing $Fe^{3+}$ ions to $\alpha$-Fe during the $H_2$ reduction. Comparing Mossbauer results with XRD results, we have determined most of $\alpha$-Fe are reduced from $4f_{vi}$ sites and 12k sites of $Fe^{3+}$ ions. These $\alpha$-Fe phase bring the induced anisotropy and increase saturation magnetization $M_s$.TEX>.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.243-246
• /
• 2008

목질계 바이오매스 가스화 발전에 있어서는 가스화 가스중에 함유되어있는 타르를 가능한 한 가연성 가스로 전환하여 냉가스효율을 향상시키는 것 및 잔유하는 타르는 후단기기에 악영향을 초래할 우려가 있기 때문에 타르를 저감 제거하는 것이 바람직하다. 본 연구에서는 공기 수증기를 사용하여 타르개질 프로세스의 개선을 위해서 타르에서 가스성분으로의 전환에 관한 개질 실험을 실시하여 Wood chip 타르의 열분해 개질 생성물 거동에 대하여 검토하였다. Wood chip 열분해로 생성된 타르의 원소분석 및 $^1H$ NMR분석의 결과로 타르를 치환기를 가지지 않는 방향족, alkyl-기를 가지는 방향족, 산소 함유 방향족, 지방족의 4개로 분류하였다. 개질제에 의해 경질 타르, 중질 타르 모두 감소하였다. 개질 공기는 타르를 연소시키지만 그 속도는 가연성 가스와 경합하고 $900^{\circ}C$에서는 타르의 연소는 나타나지 않았다. alkyl-기를 가지는 방향족은 메탄과 치환기를 가지지 않는 방향족으로 전환되고, 치환기를 가지지 않는 방향족은 수소와 soot로 전환되고, 산소 함유 방향족은 일산화탄소와 치환기를 가지지 않는 방향족으로 전환되는 것을 알았다. 또한, 개질제에 의해alkyl-기를 가지는 방향족, 치환기를 가지지 않는 방향족, 산소 함유방향족 모두가 일산화탄소,이산화탄소로 전환되는 것을 알았다.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.187-191
• /
• 2007

Comparative molecular similarity indice analysis (CoMSIA) models on the fungicidal activities of N-phenyl substituents (X) in N-phenyl-O-phenylthionocarbamate derivatives against rice sheath blight (Rhizoctonia solani: RS) and phytophthora blight (Phytophthora capsici: PC) were derived. Also, the characterizations of H-bonds between substrates and ${\beta}-tubulin$ were discussed quantitatively. It was revealed that, from the contour maps of CoMSIA models, the H-bond acceptor field contributed the most highly to fungicidal activity for two fungi in common. It is predicted that the selectivity in the fungicidal activity between two fungi is caused by results from the roles of H-bond donor disfavor functional groups in RS and H-bond acceptor disfavor functional groups in PC when these two groups induced at meta- and para-position on the N-phenyl ring. And also, if the substituents (X) are steric disfavor group, negative charge favor groups are introduced at the metaposition in RS and H-bond acceptor group is introduced at the para-position in PC, the antifungal activity against two fungi will be likely able to be increased.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.4
• /
• pp.356-364
• /
• 2007

The partial reduction and water splitting properties of metal substituted ferrite mediums for two-step thermochemical hydrogen production, were carried out by TPR/O(Temperature programmed reduction/oxidation) method at a temperature of below 1173 K and under atmospheric pressure. $ZrO_2$ was added to the ferrite as a binder to prevent the sintering. As the results, the reactivity of the metal species added to the ferrite mediums decreased in the order of Cu>Co>Ni>Mn, on the basis of water-splitting temperature. It was also found that the produced hydrogen amounts in the water-splitting step on partial reduced mediums were corresponding to the consumed hydrogen amounts in the previously partial reduction step.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.3
• /
• pp.250-255
• /
• 2007

Hydrogen storage properties of $Ti_{0.32}Cr_{0.43-X}V_{0.25}M_X$($0{\leq}X{\leq}0.1$, M=Fe, Mn, Si) have been investigated. With varing of Mn content, the lattice parameter of the alloy was unchanged and similar to that of $Ti_{0.32}Cr_{0.43}V_{0.25}$ alloy. With increase of Fe, Si content, the lattice parameters of the BCC phases decreased. When the Fe content was 8 at%, the desorption plateau pressure increased to several atmospheres without decrease of the effective hydrogen storage capacity of the alloy. When the Mn content was 8 at%, the effective hydrogen storage capacity showed approximately 2.5 wt% without change in the desorption plateau pressure. With increase of Si content, hysteresis increased and hydrogen storage capacity decreased rapidly. A study was also made on how desorption temperature affected the usable hydrogen of the $Ti_{0.32}Cr_{0.35}V_{0.25}Mn_{0.08}$ alloy. The temperature was varied from 293 to 413 K, and the pressure from 5 to 0.002 MPa. The usable hydrogen of the alloy was 2.7 wt% when absorbed and desorbed at 293 K and 373 K., respectively. The heat of hydride formation of the alloy was approximately -35.5 kJ/mol $H_2$.

• Journal of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.280-286
• /
• 1987

The effect of substituent inleaving group on the rates of reactions of phenacyl substituted-benzenesulfonates with pyridine was determined conductometrically in acetonitrile and in methanol at 35, 45, and $55^{\circ}C$, respectively. The reaction rate became faster in proportion to electron-attracting ability of substituent, which indicates that the substituent in leaving group can directly control reaction rate. It was shown that the specific to the carbonyl carbon as the rate-determining step.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.99-104
• /
• 2015

DNA 복제는 굉장한 정확도를 가지고 이루어진다. 하지만 내, 외부적인 여러 요인으로 돌연변이가 일어나기도 한다. 그 중 토토머화에 의해 치환 돌연변이가 일어난다는 가설은 오래전부터 그 가능성이 논의되어 왔고, 직접적인 증거를 찾으려는 노력도 있어 왔다. 토토머화에 의하여 DNA염기가 다른 형으로 변하면 왓슨-크릭 염기쌍 (아데닌-타이민, 시토신-구아닌이 수소결합한 염기쌍)이 아닌 다른 염기쌍이 생성될 수 있다. 이 염기쌍이 기준이 되어 DNA가 복제되기 때문에 결과적으로 전이 돌연변이(transition), 혹은 전환 돌연변이(transversion)된 염기쌍이 생성될 수 있다. 우리는 이런 사례 중에 염기쌍의 전이 돌연변이를 중심으로 연구하고자 한다. A-T염기쌍중 하나가 지배적인 아민형(amine form)이 아니라 이민형(imine form)으로 존재할 때 아민형과는 다른 수소결합이 가능해지며 보통 잘 생성되지 않는 A-C, G-T결합이 생성될 수 있다. 이후 그 염기쌍이 기준이 되어 DNA가 복제될 때에는 왓슨-크릭 염기쌍이 주로 생성되어 A-T염기쌍이 G-C 염기쌍으로 치환되는 DNA가닥이 생기게 된다. 우리는 이러한 과정을 에너지와 반응속도 측면에 집중하여 분석해보았다. 계산 결과, $A-C^*$, $A^*-C$, $G-C^*$, $G^*-C$의 염기쌍 생성이 왓슨-크릭 염기쌍과 비슷하거나 더 큰 정도로 에너지 면에서 유리하였으며 대부분의 돌연변이가 에너지 측면에서 보았을 때 $A-C^*$ 염기쌍을 통하여 생김을 알 수 있었다. 계산된 값은 약 $10^{-6}$ 정도의 빈도를 보였다.

• Journal of the Korean Chemical Society
• /
• v.52 no.1
• /
• pp.23-29
• /
• 2008

Simple Keggin type tungsten and molybdenum heteropoly acids, H3PW12O40 and H3PMo12O40, were usedas water-tolerant catalysts for the oxidation of alcohols with 34% hydrogen peroxide in normal drinking water. Accordingto our findings, H3PW12O40 may be used as a simple, effective, and cheap catalyst for this type of transformation in nor-mal drinking water with excelent yields. Efects of diferent solvents at 25-80oC and changing concentration of catalystand substrate on the reaction progress were also studied.

• Transactions of the Korean hydrogen and new energy society
• /
• v.9 no.1
• /
• pp.16-24
• /
• 1998

Recently Zr-based $AB_2$ type hydrogen absorbing alloy has received much attention as a negative electrode material for the Ni-MH batteries because of its high capacity. In this study $ZrV_{0.1}Mn_{0.7}Ni_{1.2}$ alloy was chosen and the effects of heat treatment and a partial substitution of the Mo in Mn site on the various electrode properties were investigated. The alloys was prepared by arc melting (as-cast sample). Some of them were heat treated at $1,100^{\circ}C$ for 4 hours. After this they were differentiated by the different cooling rates of slow cooling and quenching. Various electrode characteristics such as activation process, high rate dischargeability and self discharge characteristic were investigated with the three types of electrodes. It was found that heat treated alloys resulted in an increase in plateau flatness of P-C isotherms however both discharge capacity and high rate capability were decreased. And the partial substitution of Mo for Mn in $ZrV_{0.1}Mn_{0.7}Ni_{1.2}$ alloy improved the self-discharge characteristic without the loss of discharge capacity (300mAh/g).

• Korean Journal of Soil Science and Fertilizer
• /
• v.1 no.1
• /
• pp.117-123
• /
• 1968

A simplest and best method to find out lime requirement for Korean soils is described. Twenty six top soil samples were collected from various localities and chemical characteristics were dertermined. Three different buffer curve methods were employed as the standard to find out the most reliable test for lime requirement. In addition, the lime requirement test by the Shoemaker's and Woodruff's as well as the O.R.D. kit method were compared with the most reliable buffer curve method. The results may be summarized as follows. 1. The regression equation of the most reliable lime requirement by buffer curve method, y, on percent base saturation of various soils, X, was y=9.69-0.106 X and the negative correlation coefficient r=-0.84 was statistically significant at 5% level. 2. Lime requirement test by the best, buffer curve, method was more well correlated with the sum of exchangeable hydrogen and exchangeable aluminum contents of the soil samples than the exchangeable hydrogen content only. 3. The ordinary buffer curve method for lime requirement is more reasonable than the lime requirement test by the buffer curve prepared after addition of 1 normal potassium chloride or calcium chloride solutions. 4. The lime requirement tests by the most reasonable buffer curve method, X, and by the Woodruff's, the Shoemaker's and O.R.D. kit were compared. The best method for laboratory lime requirement test was the Shoemaker's method and the O.R.D. kit method also was good enough for the field test and these two method are recommended as the unified method of lime requirement test in each soil testing laboratories throughout Korea.