• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2005년도 추계학술대회 논문집
• /
• pp.361-363
• /
• 2005

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.298-298
• /
• 2009

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.250-251
• /
• 2010

• 과학과기술
• /
• 제29권6호통권325호
• /
• pp.18-19
• /
• 1996

각종 기능을 갖춘 센서와 컴퓨터로 자동항법장치를 한 미래의 자동차가 눈 앞에 다가오고 있다. 단단하고 충격을 줄여주는 특수 플라스틱, 밤에 운전시야를 넓혀주는 적외선 감지장치, 자동으로 펑크를 때워주는 로열티 타이어, 고온에 견디는 세라믹 엔진, 수소를 연료로 하는 공해없는 자동차 등의 개발이 한창 진행중이다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2004년도 춘계학술발표대회 및 제6회 신소재 심포지엄
• /
• pp.86-86
• /
• 2004

• 한국정보통신학회논문지
• /
• 제17권10호
• /
• pp.2461-2465
• /
• 2013

본 논문은 광섬유 브래그 격자의 방사선 민감도에 대한 수소로딩 공정의 영향에 대해서 연구하였다. 게르마늄이 함유된 광섬유에 수소로딩 기간을 달리하여 광섬유 브래그 격자를 제작하였다. 광섬유 브래그 격자는 총 18 kGy 감마선에 조사하여 방사선에 의한 브래그 파장의 변화를 측정하였고, 방사선 조사 후에는 반치대역폭과 온도 감도 계수의 변화를 평가하였다. 수소로딩 조건에 따라서 방사선에 의한 브래그 파장의 변화는 약 2 배 이상의 차이를 보였다.

• 한국수소및신에너지학회논문집
• /
• 제25권5호
• /
• pp.491-499
• /
• 2014

It is important to accurately measure and control the relative humidity of humidified gas entering a PEM (polymer electrolyte membrane) fuel cell stack because the level of humidification strongly affects the performance and durability of the stack. Humidity measurement devices can be used to directly measure the relative humidity, but they cost much to be equipped and occupy spaces in a fuel cell system. We present soft sensors for predicting the relative humidity without actual humidity measuring devices. By combining FIR (finite impulse response) model with PLS (partial least square) and SVM (support vector machine) regression models, DPLS (dynamic PLS) and DSVM (dynamic SVM) soft sensors were developed to correctly estimate the relative humidity of humidified gases exiting a planar-type membrane humidifier. The DSVM soft sensor showed a better prediction performance than the DPLS one because it is able to capture nonlinear correlations between the relative humidity and the input data of the soft sensors. Without actual humidity sensors, the soft sensors presented in this work can be used to monitor and control the humidity in operation of PEM fuel cell systems.

• 한국수소및신에너지학회논문집
• /
• 제25권5호
• /
• pp.525-532
• /
• 2014

The sensing of a stack coolant deficiency is very important in that cooling performance of a fuel cell, overheating prevention of a stack or coolant heater. This paper explains the performance comparison between the coolant contact/noncontact level sensors and coolant deficiency sensing logic using the pressure sensor in a stagnant or circulating flow. Throughout the comparison, the pressure sensor is more suitable than the other sensors in terms of the precision, fast response, sensing frequency. After the experiment, the pressure sensor is equipped to an FCEV(Fuel Cell Electric Vehicle) to verify sensing definitely. There was no miss-sensing using pressure sensor while FCEV runs in the conditions of the paved road and cross country road.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.378-385
• /
• 2016

In this study, we synthesized a biocatalyst consisting of glucose oxidase (GOx), polyethyleneimine (PEI) and carbon nanotube (CNT) with addition of glutaraldehyde (GA)(GA/[GOx/PEI/CNT])for fabrication of glucose sensor. Main bonding of the GA/[GOx/PEI/CNT] catalyst was formed by crosslinking of functional end groups between GOx/PEI and GA. Catalytic activity of GA/[GOx/PEI/CNT] was quantified by UV-Vis and electrochemical measurements. As a result of that, high immobilization ratio of 199% than other catalyst (with only physical adsorption) and large sensitivity value of $13.4{\mu}A/cm^2/mM$ was gained. With estimation of the biosensor stability, it was found that the GA/[GOx/PEI/CNT] kept about 88% of its initial activity even after three weeks. It shows GA minimized the loss of GOx and improved sensing ability and stability compared with that using other biocatalysts.

• 한국수소및신에너지학회논문집
• /
• 제34권1호
• /
• pp.77-82
• /
• 2023

The fuel cell in fuel cell electric vehicle utilizes oxygen in the atmosphere, which requires the use of an air cleaner system to minimize the intake of harmful pollutants. To estimate the performance of the air cleaner system, the pressure drop between the filter inlet and outlet is used under the rated air flow condition. In this study, the effect of sensor error in this air cleaner testing is experimentally carried out. It is found that the errors of the temperature sensor does not significantly affect the estimation of pressure drop. However, in the case of the pressure sensor, 5% sensor error results in the error of pressure drop estimation by 3%. Therefore, it is recommended that the measurement accuracy of the pressure sensor mounted in test system should be maintained at less than 5%.