• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.30-35
• /
• 2005

In order to examine the electrochemical polarization characteristics of hydrogen embrittlement far STS444 with welding conditions, this paper carried out the accelerated hydrogen osmosis test and the electrochemical polarization test. That is, in $0.5M\; H_2SO_4+0.001M\;As_2O_3$ solution, the hydrogen embrittlement behavior of STS444 added to load of $1,400kg/cm^2$ together with hydrogen osmosis by current of $30mA/cm^2$ far 60 min. was considered. In researching the electrochemical polarization characteristics of hydrogen embrittlement for STS444 with welding conditions, the previous study clarified that tensile strength or elongation became low influenced by absorption of oil or water before welding. In this paper, we proposed the advanced mechanism of hydrogen embrittlement that integrated electrochemical corrosion with the existing mechanism of hydrogen embrirtlement.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.252-253
• /
• 2012

음극전기분해법을 이용하여 고강도 DP강과 TRIP강에 수소를 강제 주입시켜, 시험편 내 수소량을 정량적으로 분석하였고, 표면하 미소경도분포 측정과 소형펀치시험 및 파단면 관찰을 통하여 수소주입량에 따른 고강도 박강판재의 수소침투 및 수소취화거동을 평가하고자 하였다. DP강은 강도가 클수록 높은 수소량으로 조사되었고, TRIP강은 DP강에 비해 주입된 수소량이 적은 것으로 조사되었다. 또한 미소경도분포 및 소형펀치시험에서도 DP강은 TRIP강에 비해 수소취성에 민감성이 높은 것으로 평가되었다.

• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.11-16
• /
• 2005

In this paper, the hydrogen osmosis test and the mechanical tensile test were carried out to examine hydrogen cracking behavior of STS444 with welding conditions. In $0.5MH_2SO_4+0.001M \;As_2O_3$ solution, the hydrogen embrittlement characteristics of weld zone of STS444 added to load of $1,400 kg/cm^2$ together with hydrogen osmosis by current of $30mA/cm^2$ for 60 min. was considered. As a result of study on the hydrogen embrittlement and mechanical characteristics of STS444외와 with welding conditions the tensile stress and elongation of STS444 get lower by the absorption of oil or water before welding. Also, the reduction rate of tensile stress and elongation of STS444 is larger because of hydrogen embrittlement by the absorption of oil or water. STS444 by the absorption of water before welding is more sensitive to hydrogen embrittlement than oil.

• Journal of the Korean earth science society
• /
• v.23 no.6
• /
• pp.474-485
• /
• 2002

The object of this study is to investigate the contamination degree and the interpretation of sea water intrusion phenomena with hydrogeochemical and hydrogen-oxygen stable isotope of coastal aquifer in the Gogum area, Korea. The physical characteristics of groundwaters is the neutral pH condition and transitional Redox environments, and groundwater is affected by sea water & surface water. The chemical properties of groundwaters are showing an increase in contamination owing to the sea water intrusion, waste water from the surface and agricultural chemicals. In the case of chloride, 6 samples of the groundwater in the study area are in excess of the drinking water standard. The Piper diagram shows the contamination in GG-4 and 14 by sea water intrusion. GG-3, 7 and 13 dominate the Na-HCO$_{3}$ type water and regional (GG-14) is indicated to dominate the Na-Cl type water such as sea water. According to the Sl (saturation index), sea water is oversaturated with respect to calcite and dolomite, GG-3, 14 and 18 are approaching the saturation state. The hydrogen-oxygen stable isotope ratio of groundwaters originates in the meteoric water, and groundwaters of GG-1, 5 and 14 display high oxygen isotope value due to surface water trespass and sea water intrusion. The result of this study, GG-14 is contaminated by sea water intrusion, groundwaters expected GG-3, 7 and 13 is in progress to artificial pollution and sea water intrusion.

• Journal of the Korean Vacuum Society
• /
• v.2 no.3
• /
• pp.374-383
• /
• 1993

필라멘트와 Si 기판 사이의 기전력을 20, 80, 140, 200V로 증가시키면서 EACVD에 의하여 성장된 다이아몬드 박막에 대하여 다이아몬드/Si 계면분석 및 계면강도를 측정하였다. 주사형전자현미경(SEM), 고분해능투과형전자현미경(HRTEM), 오제이전자분석기(AES)에 의해 계면상태를 분석한 결과, 기전력 증가에 따라 활성탄화수소 이온(CmHn-)에너지가 증가되어져 CmHn-이 Siso로 침투(Impringement)가 증가되고 침투된 높은 에너지의 CmHn-이 Si과 화학결합하여 생성되는 SiC층 깊이 및 농도 분포도 증가된다. 풀 시험(Pull test)에 의한 계면강도 측정 결과, SiC층 깊이 및 농도분포가 증가할수록 계면강도가 증가하였다. 관찰된 파면과 파면의 X-선 메핑 결과 및 HRTEM과 AES에 의한 분석 결과, 기전력 증가에 따라 공극율이 적고 치밀한 다이아몬드 박막이 성장된다. 그리고 생성되는 SiC층 농도 및 깊이 분포가 증가함에 따라 다이아몬드/Si 계면이 강화되고, 상대적으로 파괴는 다이아몬드/Si 계면이 아닌 SiC층이나 Si 내부에서 발생된다. 결국, 기전력을 증가하여 활성탄화수소이온의 에너지를 증가함으로써 계면강도가 우수하며 공극율이 매우 적고 치밀한 다이아몬드 박막을 성장할 수 있다.

• Journal of Hydrogen and New Energy
• /
• v.20 no.4
• /
• pp.331-336
• /
• 2009

수소가 Pt/$MoO_3$로 흡장되는 현상을 XRD, TEM, CO 화학흡착 분석방법을 사용하여 조사하였다. 소성과정은 Pt/$MoO_3$ 촉매의 Chlorine 함유량을 감소하며 박막을 형성하였다. 소성전과 비교하여 수소 흡장량은 소성 후에 증가하였다. Orthorhombic Pt/$MoO_3$은 Hexagonal Pt/$MoO_3$보다 항상 수소 흡장량이 증가하였다. 상대적으로 Hexagonal Pt/$MoO_3$에서 수소 흡장량이 감소하는 이유는 Hexagonal 결정격자 내에 존재하는 $NH_4^+$ 이온에 기인하는 것으로 판단된다. 결정격자 내부로의 수소 침투시 암모니움 이온이 수소내부 기공에 장애물 역할을 하므로, 수소 흡장량이 감소하는 것으로 판단된다.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.1-6
• /
• 2017

This study evaluated hydrogen effect of metal and non-metallic materials used in the hydrogen blended natural gas vehicle. Hydrogen penetrated concentration of 34Cr-Mo steel(850MPa tensile strength) for winter driving conditions was measured 0.0018ppm and summer driving conditions was 5.3ppm. The critical hydrogen concentration of high strength metal used in this study was measured 1.03ppm by CLT. Therefore, 34CrMo steel cas cause problems in the 30% HCNG(25MPa) environment. In case of the test for non-metallic materials, all materials met the criteria of the gas resistance test, but Fluorocarbon Rubber material had a significant change in the volume. So if it is used, extra care is needed.

• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2017

Seawater intrusion was evaluated using electrical conductivity, chemical proxies, and oxygen isotopic compositions in coastal area. It seems that groundwater in the area where the electrical conductivity is over $3,000{\mu}S/cm$ is influenced by seawater. However, it is very difficult that seawater intrusion is distinguished from other contaminants using the electrical conductivity. The chemical proxies and oxygen and hydrogen isotopic compositions can quantitatively estimate seawater intrusion. However, these method is a costly disadvantage. Therefore, firstly, groundwater contamination by seawater intrusion was evaluated using electrical conductivity and then the additional chemical and isotopic analysis were conducted in areas where possibility of contamination by seawater intrusion is high. These systematic analytical method can reduce analytical cost to quantitatively evaluate influence of seawater intrusion on coastal groundwater and may improve efficiency of analytical method for seawater intrusion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.191-194
• /
• 2004

Ferroelectric $Pb(Zr_{0.52}Ti_{0.48})O_3$ (PZT) 박막을 $Pt(111)/Ti/SiO_2/Si$ 기판위에 증착되었고, 수소 후열처리 후의 특성변화를 연구하였다. 동시에 10 nm의 $(Pb_{0.72}La_{0.28})Ti_{0.94}O_3$ (PLT) buffer를 사용한 PZT 박막의 수소 후열처리 효과를 관찰하였다. PZT 박막의 경우, 수소 후열처리 전과 후에 강유전 특성이 현저하게 감소한 반면, PLT buffer가 사용된 PZT 박막의 경우, 강유전 특성에 거의 변화가 없었다. 이는 PLT buffer를 사용함으로써 PZT 박막의 배향성이 향상되고, 이에 따라 forming gas에 의한 수소원자가 박막 내로의 침투가 어렵게 된다. 따라서 수소원자에 대한 PZT 박막의 열화되는 현상이 buffer를 사용하는 경우, 거의 나타나지 않게 된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.851-852
• /
• 2012