• 제목/요약/키워드: 수상 로봇

검색결과 18건 처리시간 0.028초

무인 수상정의 융합 항법 및 GPS 이상 검출 (Fused Navigation of Unmanned Surface Vehicle and Detection of GPS Abnormality)

  • 고낙용;정석기
    • 제어로봇시스템학회논문지
    • /
    • 제22권9호
    • /
    • pp.723-732
    • /
    • 2016
  • This paper proposes an approach to fused navigation of an unmanned surface vehicle(USV) and to detection of the outlier or interference of global positioning system(GPS). The method fuses available sensor measurements through extended Kalman filter(EKF) to find the location and attitude of the USV. The method uses error covariance of EKF for detection of GPS outlier or interference. When outlier or interference of the GPS is detected, the method excludes GPS data from navigation process. The measurements to be fused for the navigation are GPS, acceleration, angular rate, magnetic field, linear velocity, range and bearing to acoustic beacons. The method is tested through simulated data and measurement data produced through ground navigation. The results show that the method detects GPS outlier or interference as well as the GPS recovery, which frees navigation from the problem of GPS abnormality.

자율수상선을 이용한 수중 자기장 지도 작성 (Underwater Magnetic Field Mapping Using an Autonomous Surface Vehicle)

  • 정종대;박정홍;최진우
    • 로봇학회논문지
    • /
    • 제13권3호
    • /
    • pp.190-197
    • /
    • 2018
  • Geomagnetic field signals have potential for use in underwater navigation and geophysical surveys. To map underwater geomagnetic fields, we propose a method that exploits an autonomous surface vehicle. In our system, a magnetometer is rigidly attached to the vehicle and not towed by a cable, minimizing the system's size and complexity but requiring a dedicated calibration procedure due to magnetic distortion caused by the vehicle. Conventional 2D methods can be employed for the calibration by assuming the horizontal movement of the magnetometer, whereas the proposed 3D approach can correct for horizontal misalignment of the sensor. Our method does not require a supporting crane system to rotate the vehicle, and calibrates and maps simultaneously by exploiting data obtained from field operation. The proposed method has been verified experimentally in inland waters, generating a magnetic field map of the test area that is of much higher resolution than the public magnetic field data.

쓰레기 수거용 무인 수상로봇 (Unmanned Surface Vehicle for Collecting Marine Debris)

  • 오명훈;김재형;김현민;신동아;김동헌
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2015년도 제46회 하계학술대회
    • /
    • pp.61-62
    • /
    • 2015
  • This study presents a movable USV (Unmanned Surface Vehicle) based on Micro Controller. Recently, Micro Controller has widely used in application programming such as industry and education application. In particular, Robot is capable of collecting Marine Debris in any sea area is needed so We propose USV used IP camera for automatic driving, distance detection to control movement of USV in order to prevent of collision based on Arduino. Also, Surrounding situation taken by IP camera can be transmitted to monitor and smartphone.

  • PDF

작은 스케일의 생체 모방 수상 점프 로봇 (a biologically inspired small-scale water jumping robot)

  • 신봉수;김호영;조규진
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.1427-1432
    • /
    • 2008
  • This paper describes the locomotion of a water jumping robot which attempts to emulate the fishing spider’s ability to jump on the water surface. While previous studies of the robots mimicking arthropods living on water were focused on recreating their horizontal skating motions, here we aim to achieve a vertical jumping motion. The robot jumps by pushing the water surface with rapidly released legs which were initially bent. The motion is triggered with a latch driven by the shape memory alloy actuator. The robot is capable of jumping to the maximum height of 26mm. Jumping efficiency, defined the maximum jumping height on water over the maximum jumping height on rigid ground, is 0.26 This work represents a first step toward robots that can locomote on water with superior versatility including skating and jumping.

  • PDF

수상 태양광 발전시설 무인청소 로봇 개발 (Development of Unmanned Cleaning Robot for Floating Photovoltaic Panels)

  • 박성수;이승렬;이현규;이상순
    • 반도체디스플레이기술학회지
    • /
    • 제19권3호
    • /
    • pp.130-135
    • /
    • 2020
  • This paper describes the results of a study on the unmanned cleaning robot that performs the cleaning of the floating photovoltaic panels. The robot uses two SSC (Sliding Suction Cup) adsorptive devices to move up and down the slope. First, the forces generated when the robot moves up the slope are mechanically analyzed. The robot was designed and manufactured to operate stably by using the presented results. Next, the robot motion was tested on the inclined panel. It has been proven that robots are well designed and built to clean sloped panels.

해파리 퇴치용 자율 수상 로봇의 설계 및 구현 (Design and Implementation of Unmanned Surface Vehicle JEROS for Jellyfish Removal)

  • 김동훈;신재욱;김형진;김한근;이동화;이승목;명현
    • 로봇학회논문지
    • /
    • 제8권1호
    • /
    • pp.51-57
    • /
    • 2013
  • Recently, the number of jellyfish has been rapidly grown because of the global warming, the increase of marine structures, pollution, and etc. The increased jellyfish is a threat to the marine ecosystem and induces a huge damage to fishery industries, seaside power plants, and beach industries. To overcome this problem, a manual jellyfish dissecting device and pump system for jellyfish removal have been developed by researchers. However, the systems need too many human operators and their benefit to cost is not so good. Thus, in this paper, the design, implementation, and experiments of autonomous jellyfish removal robot system, named JEROS, have been presented. The JEROS consists of an unmanned surface vehicle (USV), a device for jellyfish removal, an electrical control system, an autonomous navigation system, and a vision-based jellyfish detection system. The USV was designed as a twin hull-type ship, and a jellyfish removal device consists of a net for gathering jellyfish and a blades-equipped propeller for dissecting jellyfish. The autonomous navigation system starts by generating an efficient path for jellyfish removal when the location of jellyfish is received from a remote server or recognized by a vision system. The location of JEROS is estimated by IMU (Inertial Measurement Unit) and GPS, and jellyfish is eliminated while tracking the path. The performance of the vision-based jellyfish recognition, navigation, and jellyfish removal was demonstrated through field tests in the Masan and Jindong harbors in the southern coast of Korea.

무인해상자율로봇(Wave Glider)을 이용한 해양관측 현황 (Status of Ocean Observation using Wave Glider)

  • 손영백;모태준;정섬규;황재동;오현주;김상현;유주형;조진형
    • 대한원격탐사학회지
    • /
    • 제34권2_2호
    • /
    • pp.419-429
    • /
    • 2018
  • 해양을 관측하는 작업 중에서 무인자율수상체계를 활용한 관측은 장거리 원거리 이동하여 해양재난, 재해 발생 해역 관측 및 악천우에서도 관측이 가능해졌다. 그리고 제한된 관측 영역 외 광역의 해역에서 발생한 현상을 연계하여 종합적으로 분석하는 융합기술들이 개발되고 있다. Wave Glider는 대표적인 무인자율수상체계 중 하나로, 파도에 의한 상하 움직임으로 전진하며 장거리 기동이 가능하고 위성통신을 통하여 자율적으로 이동하는 이동형 부이체계로 기존 관측의 한계를 극복하는 차세대 관측체계로 부각되고 있다. 본 연구에서는 2016년과 2017년 두 차례 중국 기원 저염분수 영향이 발생하는 하계에 제주를 포함하는 동중국해에서 관측을 수행하였다. 하계 동중국해 해역에서 발생한 고수온 현상과 저염분수와의 관계를 파악하기 위해서 광역(위성) 감시망과 국지적(Wave Glider) 감시망을 이용하여 관측을 수행했다. 그리고 동중국해에 영향을 준 태풍 또한 두 감시망에서 실시간 영향을 관측했다. 이것은 최근 개발되는 무인수상체계가 높은 내구성과 자율무인 체계로 인하여 다양한 해양환경에서 장기간 관측이 가능해지면서 다른 감시망과 연동하여 종합적이고 효율적인 관측체계를 구축하게 되었다.

센서네트워크 기반의 수중, 수상 및 공중 로봇의 협력제어 기법 (Collaborative Control Method of Underwater, Surface and Aerial Robots Based on Sensor Network)

  • 만동우;기현승;김현식
    • 전기학회논문지
    • /
    • 제65권1호
    • /
    • pp.135-141
    • /
    • 2016
  • Recently, the needs for the development and application of marine robots are increasing as marine accidents occur frequently. However, it is very difficult to acquire the information by utilizing marine robots in the marine environment. Therefore, the needs for the researches of sensor networks which are composed of underwater, surface and aerial robots are increasing in order to acquire the information effectively as the information from heterogeneous robots has less limitation in terms of coverage and connectivity. Although various researches of the sensor network which is based on marine robots have been executed, all of the underwater, surface and aerial robots have not yet been considered in the sensor network. To solve this problem, a collaborative control method based on the acoustic information and image by the sonars of the underwater robot, the acoustic information by the sonar of the surface robot and the optical image by the camera of the static-floating aerial robot is proposed. To verify the performance of the proposed method, the collaborative control of a MUR(Micro Underwater Robot) with an OAS(Obstacle Avoidance Sonar) and a SSS(Side Scan Sonar), a MSR(Micro Surface Robot) with an OAS and a BMAR(Balloon-based Micro Aerial Robot) with a camera are executed. The test results show the possibility of real applications and the need for additional studies.