• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.211-216
• /
• 2003

Absorption characteristics of hot air-. vacuum-, and freeze-dried ginger powder were investigated. Monolayer moisture content as determined by GAB equation was $0.257{\sim}0.540\;H_2O/g$, showing higher significance than BET equation. Absorption enthalpy was calculated based on different drying methods and water activities. Absorption energy decreased with increasing water activity but was not affected by drying method. Isotherm curves showed a typical sigmoid form. Among models applied for predicting equilibrium moisture content, Caurie model was the best fit model for ginger powder, showing the lowest prediction deviation of $1.2{\sim}5.4%$, followed by Henderson then Bradley models. The prediction model equations for the moisture content were established by in(time), water activity, and temperature.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.330-335
• /
• 1991

The values of water activity in the different concentrations of NaCl and sodium lactate were measured by hygrometer in the water-sorbitol systems. Interaction of NaCl and sodium lactate was evaluated by Raoult's law. The discrepancy between experimental and theoretical value by the Raoult's law was defined as interaction between water-sorbitol and added solutes in the systems. The changes of interacted water and solutes were observed in whole range of water activity. The value of interacted water (water: sorbitol=1 : 1.1241) obtained by added sodium lactate was found to be higher than sodium chloride. The amount of interacted solute reached maximum about Aw 0.87, while the interactions between added solute and sorbitol showed an increasing tendency below Aw 0.87.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.449-453
• /
• 2002

This was studied to evaluate the quality characteristics of the bread added chitosan during storage at room temperature(Temp. $27^{\circ}C{\pm}2$, RH $75%{\pm}10$). The volume of the dough was increased depending on the larger molecular weight and the higer concentration of chitosan but was decreased at 0.50% of 120 kDa chitosan. The water activity was low depending on the larger molecular weight and the higher concentration of chitosan at the early storage, but maintained constantly during storage totally. The colors of the bread was hardly affected by 30 kDa of chitosan. Textural characteristics was improved at 30 kDa and 120 kDa of chitosan. Especially, the change of the hardness were maintained lower at 30 kDa, 120 kDa of chitosan during storage than that of standard. These results showed that the quality of the bread by added 30 kDa of chitosan was improved highly.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.694-702
• /
• 2002

Activated carbons have been used as adsorbents in various industrial application, such as solvent recovery, gas separation, deodorization, and catalysts. In this study, the effects of residual water on the activated carbon adsorbent surface on the adsorption capacity of $CCl_4$ were investigated. Adsorption behavior in a fixed bed was studied in terms of feed concentration, flow rate, breakthrough curve and adsorption capacity for $CCl_4$. Desorption characteristics of residual water on activated carbon were also studied. The water contents of the activated carbon were varied in the range of 0-20%(w/w) and all experiments were performed at 298.15 K. The adsorption equilibrium data $CCl_4$ on the activated carbon were well expressed by Langmuir isotherm. The adsorption capacity of $CCl_4$ decreased with increasing residual water content. Desorption of residual water in activated carbon decreased expotentially with $CCl_4$ adsorption. The obtained breakthrough curves using LDF(linear driving force) model represented our experimental data.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.12
• /
• pp.1903-1907
• /
• 2010

Drying curves for raw Alaska pollack seemed to follow typical food dehydration process with a very short initial settling down period. It was evident that there are some differences in drying rates between each part of fish body showing the highest drying rate for fish head followed by that for fish skin and that for flesh, presumably because of differences in water holding capacity of the components of each part. Specifically, the drying curve of fish flesh revealed that a boundary layer, thereby, a time period, existed which showed a big difference in moisture content and/or water activity as drying proceeds. The boundary layer in fish flesh with high moisture content between the layer contributes to reduce drying rate mainly as a consequence of protein aggregation resulting in hardening of fish flesh. The first boundary layer in this work appeared to show within several hours after initiation of drying. For Hwangtae, a naturally cyclic freeze-thaw dried and aged Alaska pollack which was popular in Korea, manufacturing process, it is clear that periodic moistening of boundary layer in fish flesh prohibits hardening fish flesh in boundary layer and enables steady moisture diffusion from inside of the fish flesh to surface of the fish body.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.127-134
• /
• 2010

This study was to develop high-nutritious energy bar from extruded hemp obtained by extrusion process. Mixture of rice flour and defatted hemp was extruded at a barrel temperature of 110 and 130$^{\circ}C$, and moisture content of 20 and 25%. Properties of extrudates such as bulk density, expansion index, breaking strength, apparent elastic modulus, water absorption index (WAI), water solubility index (WSI) have been analyzed. The antioxidant potential was determined by the DPPH-radical scavenging assay. The expansion index was the highest in rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content among the other hemp-added extrudates. The WAI was increased with increase in moisture content, while the WSI was increased with increase in barrel temperature. The peak viscosity of rice extrudate had higher valule than those of extrudate added with hemp. DPPH scavenging activity of rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content showed the highest value. Sensory properties, moisture content and color were assessed for quality of energy bar. The color values of the energy bar indicated decreasing L (lightness) and b (yellowness), and increasing a (redness) after 30 days storage at ambient condition. The highest overall acceptable was the energy bar added with rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content.

• Food Science and Preservation
• /
• v.17 no.4
• /
• pp.478-486
• /
• 2010

The qualities of ginger prepared by an MPD (molecular press dehydration) method using maltodextrin, or dried using reused dehydration liquid, or prepared by freeze-drying or hot-air drying, were compared in terms of approximate overall composition, color, water absorption index, water solubility index, total sugar level, reducing sugar concentration, antioxidant activity, and gingerol content. The approximate composition of ginger prepared by the MPD method was lower in overall biochemical content than were those of gingers prepared using other methods. Ginger prepared by the MPD method retained the original ginger color. The water absorption and solubility index of ginger prepared by the MPD method (using maltodextrin) were better than those of gingers dried using other methods. The total sugar content did not change noticeably upon processing. The reducing sugar content of ginger prepared by hot-air drying was low. The antioxidant activity of ginger prepared by the MPD method was higher than that of freeze-dried and hot air-dried ginger samples, with values lower than those of BHA (3(2)-t-Butyl-4-hydroxyanisole) and BHT (2,6-Di-tert-butyl-4-methylphenol). The gingerol content of ginger prepared by the freeze-drying method was higher than that of gingers prepared by other methods. However, ginger constituents were present in the dehydration liquid used in the MPD method. The results indicate that both the MPD method (using maltodextrin) and the use of reused dehydration liquid are efficient methods by which ginger can be dried.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.775-779
• /
• 1993

The effects of water activity and light on the oxidation of carotenoid were studied using both the model systems of carrot lipids and freeze dried carrot. Autoxidation of crude lipids from the freeze dried carrot and the stability of carotenoids in controlled systems varing water activities and/or lights were examined. The degree of autoxidation of crude lipid stored at $30^{\circ}C$ for 16 days was significant(p< 0.05) and 71.8% destruction of carotenoid in the crude lipids were observed. When the powdered solid models of freeze dried carrot were stored at $30^{\circ}C$ for 35 days under various water activities and the presence of light, the maximum stability of carotenoid was found at $a_{w}$ 0.42 and the damaging effect of lights on the stability of carotenoid was significant (p<0.05). The absoprtion spectra of carotenoids changed according to the degree of oxidation, but shifts of the maximum wavelength was not observed.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.7.2-7.2
• /
• 2005

• Korean Journal of Food Science and Technology
• /
• v.17 no.2
• /
• pp.101-106
• /
• 1985

Dried soymilk residue(SMR) which was prepared by washing with ethanol and acetone, followed by drying at $60^{\circ}C$ was investigated for its sorption characteristics and the relationship between moisture content and water activity when it was mixed with wheat flour. During storage at $20^{\circ}C$ and various RH, an excess sorption phenomena was observed for solvent treated and dried SMR before equilibrium reached. A simple equation of log(dw/dt)=b log t+log a, where t is storage time(hr) and w is %$(H_2O)$ was drived for sorption or desorption rate of dried SMR at RH range of 12%-92%. From sorption isothermifigure, the moisture content(Mi) could be calculated from water activity by the equation of Mi=b Aw+a. The proposed equation was proved to have better fitness than those of the Smith isotherm equation or Lang and Steinberg equation for the mixture of dried SMR and wheat flour.