Food Engineering Progress (산업식품공학)

Korean Society for Industrial Food Engineering (한국산업식품공학회)
권호 표지

Physicochemical Properties of Extruded Defatted Hemp Seed and Its Energy Bar Manufacturing

압출성형 삼종실의 이화학적 특성과 에너지바의 제조

  • Gu, Bon-Jae (Department of Food Science and Technology, Kongju National University) ;
  • Norajit, Krittika (Department of Food Science and Technology, Kongju National University) ;
  • Ryu, Gi-Hyung (Department of Food Science and Technology, Kongju National University)
  • Received : 2010.03.23
  • Accepted : 2010.04.21
  • Published : 2010.05.30
⟨ Previous Next ⟩

Abstract

This study was to develop high-nutritious energy bar from extruded hemp obtained by extrusion process. Mixture of rice flour and defatted hemp was extruded at a barrel temperature of 110 and 130$^{\circ}C$, and moisture content of 20 and 25%. Properties of extrudates such as bulk density, expansion index, breaking strength, apparent elastic modulus, water absorption index (WAI), water solubility index (WSI) have been analyzed. The antioxidant potential was determined by the DPPH-radical scavenging assay. The expansion index was the highest in rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content among the other hemp-added extrudates. The WAI was increased with increase in moisture content, while the WSI was increased with increase in barrel temperature. The peak viscosity of rice extrudate had higher valule than those of extrudate added with hemp. DPPH scavenging activity of rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content showed the highest value. Sensory properties, moisture content and color were assessed for quality of energy bar. The color values of the energy bar indicated decreasing L (lightness) and b (yellowness), and increasing a (redness) after 30 days storage at ambient condition. The highest overall acceptable was the energy bar added with rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content.

압출성형의 이점을 활용하여 영양적으로 단백질과 식이섬유가 풍부하며 조직감과 항산화 활성이 우수한 에너지바를 제조하기 위해서 탈지 삼종실 압출성형물의 팽화율, 밀도, 파괴력, 겉보기탄성계수, 수분흡착지수와 수분용해지수, 페이스트 점도를 측정하였다. 또한 압출성형물의 항산화활성을 측정하기 위해 DPPH에 의한 전자공여능을 측정하여 비교 분석하였다. 탈지 삼종실 에너지바 제조 후 품질특성 조사를 위해 수분함량, 색도, 관능검사를 측정하였다. 압출성형 공정변수는 수분함량(20, 25%), 배럴온도(110, 130$^{\circ}C$)이였으며 수분함량 20%, 배럴온도 130$^{\circ}C$에서 팽화율이 가장 높았으며 밀도, 파괴력, 탄성계수가 낮았다. 수분함량이 증가할수록 수분흡착지수가 증가하였으며 수분용해지수는 배럴온도 130$^{\circ}C$에서 높은 경향을 나타내었다. 압출성형 탈지 삼종실은 페이스트 점도 값이 낮게 나타났으며 DPPH에 의한 전자공여능 값은 수분함량 20%, 배럴온도 130$^{\circ}C$ 에서 항산화활성이 높게 나타났다. 탈지 삼종실 에너지바 제조 30일 후에 수분함량은 0.60-1.13% 상승하였으며 백색도와 황색도는 감소, 적색도는 증가하는 경향을 보였다. 관능평가 결과 압출성형 변수가 수분함량 20%, 배럴온도 130$^{\circ}C$이며 탈지 삼종실이 첨가된 에너지바가 가장 좋게 평가되었다. 결론적으로 압출성형을 이용하여 삼종실을 첨가한 에너지바를 제조할 수 있었으며 중간소재인 압출성형물의 공정 변수는 수분함량 20%, 배럴온도 130$^{\circ}C$에서 가장 좋은 조건으로 판단되었다.

Keywords

Acknowledgement

Supported by : 농림수산식품부

References

  1. AACC. 1983. Approved Method of the AACC (10th ed). Method 56- 20. American Association of Cereal Chemists. St. Paul, MN, USA.
  2. Bhattacharya M, Hanna MA, Kaufman RE. 1986. Textural properties of extruded plant protein blends. J. Food Sci. 51: 988-993. https://doi.org/10.1111/j.1365-2621.1986.tb11215.x
  3. Brand-Williams W, Cuvelier ME, Berset C. 1995. Use of a free radical method to evaluate antioxidant activity. Lebensm. Wiss. Technol. 28: 25-30. https://doi.org/10.1016/S0023-6438(95)80008-5
  4. Callaway JC. 2004. Hempseed as a nutritional resource: An overview. Euphytica. 140: 65-72. https://doi.org/10.1007/s10681-004-4811-6
  5. Chae SK. 2005. Prooxidants. In: Food Chemisty. Kim SH (ed). Hyoil, Korea, pp. 158-162.
  6. Chifnnaswamy R, Hanna MA. 1999. Macromolecular and functional properties of native and extrusion cooked cornstarch. Cereal Chem. 6: 490-498.
  7. Cho YJ, Kim CT, Kim CJ, Hwang JK. 1999. Modeling of extrusion for pectin extraction from apple pomace. Korean J. Food Sci. Technol. 31: 1011-1016.
  8. Han GS, Lee SM, Shin SJ. 2009. Densified pellet fuel using woody core of industrial hemp (Cannabis sativa L.) as an agricultural waste. Korean J. Plant Res. 22: 293-298.
  9. Han JY, Kim MH, Jin T, Kim SJ, Kim MH, Ryu GH. 2007. Change in characteristics of extruded vitamin C cornstarch matrix by moisture content and barrel temperature. Food Eng. Progr. 11: 253-260.
  10. Haper JM. 1989. Food extruders and their application. In: Extrusion Cooking. Mercier C, Linko P, Harper JM (eds). AACC, Inc., St. Paul, MN, USA, pp. 91-155.
  11. Hwang JK, Kim CT, Hong SI, Kim CJ. 1994. Solubilization of plant cell walls by extrusion. J. Korean Soc. Food Nutr. 23: 358-370.
  12. Jackon DS, Gomez MH, Waniska RD, Roonet LW. 1990. Effects of single-screw extrusion cooking on starch as measured by aqueous high-performance size-exclusion chromatography. Cereal Chem. 67: 529-535.
  13. Jin T, Lee ES, Hong ST, Ryu GH. 2007. Manufacturing of goami flakes by using extrusion process. Korean J. Food Sci. Technol. 39: 146-151.
  14. Jin T, Park HY, Ryu GH. 2005. Characteristics of cereals prepared by extrusion-cooking and freeze-drying. Korean J. Food Sci. Technol. 37: 757-762.
  15. Kim JH, Ryu GH. 2001. Effects of extrusion process parameters on puffing of extruded pellets. Korean J. Food Sci. Technol. 33: 55-59.
  16. Koh DH. 1990. A study on the composition of fatty acids of hempseed. Korean J. Food Nutr. 3: 201-206.
  17. Launay B, Lisch JM. 1993. Twin-screw extrusion cooking of starches: Flow behavior of starch pastes, expansion and mechanical properties of extrudates. J. Food Eng. 2: 159-180.
  18. Lee JM, Chang PS, Lee JH. 2007. Comparison of oxidative stability for the thermally-oxidized vegetable oils using a DPPH method. Korean J. Food. Sci. Technol. 39: 133-137.
  19. Moon YH, Song YS, Jeong BC, Bang JK. 2006. Variation of cannabinoids content in hemp (Cannabis sativa L.) produced with mixed seeds of drug and non-drug type varieties. Korean J. Crop Sci. 51: 187-190.
  20. Moon YH. 2008. Review for legislation of industrial hemp regulation: The proposal to legislate industrial hemp (Cannabis sativa L.) and their research review and regulations in Korea. Korean J. Int. Agri. 20: 203-210.
  21. Padmanabhan M, Bhattacharya M. 1989. Extrudate expansion during extrusion cooking of foods. Cereal Foods World 34: 945-949.
  22. Rhee SK, Lee KB, Son JY. 1999. Prediction of shelf-life and quality changes of dried noodle during storage period. Korean J. Soc. Food Sci. 15: 127-132.
  23. Ryu GC. 2002. Effect of melt moisture and post-extrusion variables on pasting and thermal properties of corn starch extrudates. MS thesis, Kongju National University, Yesan, Korea.
  24. Ryu GH. 1995. Extrusion process with gas injection. Food Sci. Ind. 28: 30-38.
  25. Ryu GH, Lee CH. 1988. Effects of moisture content and particle size of rice flour on the physical properties of the extrudate. Korean J. Food Sci. Technol. 20: 463-469.
  26. Ryu GH, Neumann PE, Walker CE. 1993. Pasting of wheat flour extrudates containing conventional baking ingredients. J. Food. Sci. 58: 567-573. https://doi.org/10.1111/j.1365-2621.1993.tb04325.x
  27. Ryu GH, Ng PKW. 2001. Effects of selected process parameters on expansion and mechanical properties of wheat flour and whole cornmeal extrudates. Starch-Starke 53: 147-154. https://doi.org/10.1002/1521-379X(200104)53:3/4<147::AID-STAR147>3.0.CO;2-V
  28. Son HJ, Ryu GH. 2009. Chemical compositions and antioxidant activity of extract form a extruded white ginseng. J Korean Soc. Food Sci. Nutr. 38: 946-950. https://doi.org/10.3746/jkfn.2009.38.7.946