• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.574-581
• /
• 2012

The relatively short lifetime is a major obstruction for the commercial applications of OLED. One of the reason for the short lifetime is that the organic materials are interacted with water or oxygen in the atmosphere. Protection of water or oxygen from diffusing into the organic material layers are necessary to increase the lifetime of OLED. Although encapsulation of OLED with glass or metal cans has been established, passivation methods of OLED by organic/inorganic thin films are still being developed. In this paper we have developed in-situ passivation system and thin film passivation method using PECVD by which deposition can be performed at room temperature. We have analyzed the characteristics of the passivated OLED device also. The WVTR (Water Vapor Transmission Rate) for the inorganic thin film mono-layer can be reached down to $1{\times}10^{-2}g/m^2{\cdot}day$ and improved lifetime can be obtained. Thin film passivation methods are expected to be applied to flexible display.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.231-237
• /
• 2014

In this paper, we have proceeded research for failures of semiconductor device stressed by Pressure Cooker Test(PCT). After PCT stress, we found various failures such as delamination between aluminium line and device layers and chemical composition transition of aluminium. We have executed the analysis using the physical and chemical observation equipments. There were the main failures that aluminium loss of aluminium pad is occurred and $Al_xO_y$($Al_2O_3$ or $Al(OH)_3$)) layer is formed abnormally. The primary cause of the failures is reaction of supplied fluorine or chlorine gases and infiltrated moisture during etching process.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.43-53
• /
• 2008

Because the torque control method, which is also caled the clamping method in domestic construction sites, is affected by a variation of the torque coefficient, quality control of the torque coefficient is essential. This study was focused to evaluate the effects of several environmental factors and errors when installing bolts while tightening high-strength bolts. Conditioning environmental parameters include wet, rusty and exposure-to-air-only conditions. In addition, because of errors in workability such as instalation of two washers, upset washers are selected. During the tests, torque, torque coefficient, tension and angle of nut rotation were obtained using a bolt testing machine. Test specimens of four types of bolts (High-Strength Hexagon bolt on KS B 1010, Torque Shear Bolt on KS B 2819, High-Strength Hexagon bolt coated with zinc, and ASTM 490 bolt) were recomended. Based on test results, the tightening characteristics subjected to environmental parameters were investigated and compared with the results in normal condition.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.267-273
• /
• 2019

Hierarchically porous $Fe_2O_3$ nanofibers with meso- and macro- pores are designed and synthesized by electrospinning and subsequent heat-treatment. The macro pores are generated by selectively decomposition of polystyrene as a dispersed phase in the as-spun fibers containing $Fe(acac)_3$/polyacrylonitrile continuous phases during heat-treatment. Additionally, meso-pores formed by evaporation of infiltrated water vapor during electrospinning process interconnected the macro-pores and results in the formation of hierarchically porous $Fe_2O_3$ nanofibers. The initial discharge capacity and Coulombic efficiency of the hierarchically porous $Fe_2O_3$ nanofibers at a current density of $1.0A\;g^{-1}$ are $1190mA\;h\;g^{-1}$ and 79.2%. Additionally, the discharge capacity of the nanofibers is $792mA\;h\;g^{-1}$ after 1,000 cycles. The high structural stability and morphological benefits of the hierarchically porous $Fe_2O_3$ nanofibers resulted in superior lithium ion storage performance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.122-129
• /
• 2019

Cracks in concrete structures are inevitable phenomena caused by shrinkage, hydration heat, and external loads. These cracks facilitate the penetration of external harmful ions into the concrete, which greatly reduces its durability. Recently, self-healing concrete has been actively studied. Also, self-healing fiber-reinforced concrete have been studied to control the crack in concrete and to maximize the shelf-healing capability. In this study, mortar specimens containing PVA fiber, fly ash and crystalline admixture were fabricated. The compressive and flexural strength were evaluated. Also, the self-healing performance was evaluated by the absorption test. From the results, it was confirmed that the amount of water absorbed by healing of the crack decreased as time increased. It was also found that PVA fiber is beneficial for the production of calcium carbonate, an additional healing product.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.406-408
• /
• 2019

The motor applied to electric water pump used in automobiles is the canned type motor structure. The rotor, which is the driving component of the motor, is located in the bulkhead structure of the plastic injection molding, and rotates while immersed in the antifreeze. Plastic Injection Stator is placed on the outside of the bulkhead structure so that the rotor can rotate. The configuration of the rotor consists of magnet, core and shaft. In the case of magnet and core, it is very important to keep the parts sealed because it is a material that is corroded by moisture. When mounted on a vehicle, it must be capable of driving at $120^{\circ}C$ ambient conditions and should not leak under pressure of 1 bar or more. In this paper, we designed and implemented a Leak inspection automation system using helium to check the defects of the electric water pump developed satisfying this condition.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.52-52
• /
• 2018

목초지에서 비점오염원 유출특성은 가축밀도(stocking rate)와 방목형태(grazing management practice)에 기인하여 다르게 나타난다. 전통적인 방목형태는 한 대상지역에서 높은 가축밀도의 연속적인 방목(continuous grazing)을 취하는 것인데, 이 경우 토양압밀에 따른 강우의 침투량 감소, 가축의 배설물 축적 등으로 비점오염 유출량이 증가할 수 있으며, 식물의 재성장기간 부족으로 지속적인 방목지 운영이 어려울 수 있다. 순환방목(rotational grazing)은 이러한 연속적 방목 형태의 부정적인 영향을 개선하고자 대안으로 제시되었다. 방법은 구역을 나누고 초본식물의 생육상태를 고려하여 일정기간이 지나면 다른 구역으로 이동 시키며 방목하는 형태이다. 기존의 연구들은 단위 면적당 적정 가축밀도, 필드규모에서 방목형태에 따른 비점오염 유출특성에 초점을 두고 있으며, 결과들은 가축밀도의 영향보다는 방목형태에 의한 수문, 수질 영향이 더 크다고 지적하고 있다. 이에 본 연구에서는 이러한 가축밀도(Heavy vs Light) 및 방목형태(Continuous vs Rotational)가 유역의 비점오염 유출특성에 미치는 영향을 정량적으로 평가하고자, 미국 북텍사스 지역에 위치한 Clear Creek 유역을 대상으로 4개의 방목시나리오(heavy continuous[HC], light continuous[LC], multi-paddock[MP], no grazing)를 구성하고 Soil and Water Assessment Tool(SWAT) 모형에 적용하였다. SWAT 모형은 대상유역 내 4개의 방목지에서 측정한 토양수분 및 식물 바이오매스 자료, 유역 출구점에서 관측된 장기간의 수문 수질 자료를 이용하여 검증되었다. 연구결과는 순환방목(MP) 시나리오가 수질보호 및 토양침식 방지, 식생의 영양염류 흡수능력이 커지는 것과 같이 생태계서비스 기능의 개선 측면에서 최적의 방목형태(best grazing management)인 것으로 나타났으며, 이러한 결과는 가축밀도 보다는 방목형태에 기인한 것으로 필드와 유역스케일에서 동일한 결과를 보여주었다. 그러나 유역 내 목초지의 차지비율에 따라 순환방목 채택에 따른 비점오염 유출량의 감소효과는 다르게 나타나게 된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.320-320
• /
• 2016

본 연구에서는 자연환경, 수생태환경과 관련된 모니터링자료 및 수문/수질 SWAT(Soil and Water Assessment Tool) 모델링 자료를 이용하여 유역건전성을 평가하기 위한 지수를 개발하고, 한강유역($34,148km^2$)을 대상으로 표준유역단위 유역건전성 평가를 수행하였다. 본 연구에서는 미국 EPA(Environmental Protection Agency)의 유역건전성 분석 사례를 개선하여 우리나라에 유역 특성에 맞는 통합 유역건전성 평가지수를 개발하였다. 본 연구에서 분석하고자 하는 유역건전성은 유역이 본래 가지고 있는 자연적인 건전성을 평가하고자 하는 것으로, 평가를 위한 지표로 자연토지피복, 하천환경, 수문, 수질, 서식지, 수생태 관련 요소를 각각 선정하였다. 자연토지피복 및 하천, 서식지 유역건전성 평가를 위해서 DEM, 토지이용도, 하천도, 저수지, 습지자료를 이용하였고, 수생태 유역건전성 평가를 위해서는 6년간(2008년~2013년) 모니터링 된 TDI, BMI, FAI 자료로 이용하였다. 수문/수질 유역건전성 평가를 위해서는 SWAT 모형의 장기모의 결과를 활용하였으며, 30년간(1985년-2014년) 모의된 강수량, 총유출, 지표유출, 침투, 토양수분, 중간유출, 침루, 지하수 충진, 기저유출, Sediment, T-N, T-P 결과를 이용하였다. 각 평가지표로부터 표준유역별 sub-index를 도출하였으며, 6가지 sub-index를 이용하여 통합 유역건전성 지수를 산정하였다. 산정된 지수는 0부터 1까지의 값으로 나타나며, 1에 가까울수록 유역건전성이 좋은 유역을 의미한다. 연구결과 한강유역의 통합 유역건전성은 상류에서 하류로 갈수록 건전성이 안 좋아지는 것으로 분석되었으며, 특정 표준유역에 대하여 자연환경, 수문, 수질, 수생태환경 각각의 유역건전성을 평가할 수 있었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.43-48
• /
• 2022

Effect of temperature/humidity (T/H) treatment conditions on the peel strength of screen-printed Ag/polyimide (PI) structures was evaluated by peeling PI films in 90° peel test. Initial peel strength was 25.99±1.47 gf/mm, and then decreased to 6.05±0.54 gf/mm after 500 h at 85℃/85% relative humidity T/H condition. And, the peeled locus was changed from Ag/PI interface to shallow cohesive inside PI near interface. X-ray photoelectron spectroscopy analysis on the peeled surfaces showed that the long-term moisture penetration into the Ag/PI interface during T/H treatment led to hydrolytic degradation of PI to form weak boundary layer inside PI near Ag/PI interface, which are responsible for large decrease in peel strength.

• Composites Research
• /
• v.22 no.3
• /
• pp.82-88
• /
• 2009

The effect of open and filled holes on the strength behavior of carbon fiber reinforced polymeric (CFRP) composites was investigated. The strength was measured at room temperature dry, cold temperature dry, $-55^{\circ}C$, and elevated temperature wet, $108.3^{\circ}C$ on several different laminate configurations. Based on the experimental data presented, it is shown that the filled hole tensile strength is larger than that of open hole by reducing damage around the hole due to the constraint imposed by the fastener. The tensile strength at cold temperature dry, $-55^{\circ}C$ is increased with the brittleness by the thermal expansion coefficient of fiber and matrix. The compressive strength at elevated temperature wet, $108.3^{\circ}C$ is decreased by the cause of interfacial deterioration between fiber and matrix with moisture absorption.