• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.249-255
• /
• 1995

This study was conducted to investigate the effects of some soil conditioners, such as polyacrylamide(PAM), polyvinylalcohol(PVA) and Bitumen emulsion, on aggregate formation and stability, wetting angle, sorptivity and penetrability of the soil with different textures : sand, sandy loam, loam and clay loam. A pot experiment was carried out to find out the effect of treatment on the germination and growth of lettuce with three textures : sand, sandy loam and silt loam. Soil aggregates larger than 2mm in untreated soils at dry condition were naught in sand, 45% in sandy loam, 80% in loam and 90% in clay loam. Treatments of soil conditioners tended to increase the occurrence of soil aggregate larger than 2mm, which were 20~25% in sand, 55~75% sandy loam, but not affected greatly aggragate occurence in loam and clay loam. The aggregate instability was decreased by the soil conditioner treatment. The wetting angles of the soils were greatly changed by hydrophobic of Bitumen, but those were changed slightly by PVA and PAM application. The sorptivity and penetrability data indicated that the effects of different materials on these parameters differed depending upon soil texture. Application of PVA and PAM were no effect exceptive in sand. Application of Bitumen revealed that water movement was not showed in all soils. The germination rate, root weight and top plant weight of lettuce were increased in all soils by PAM treatment as compared to untreated soils. Particularly the greater effect was occurred in sand soil than in sandy loam and silt loam. PAM increased greatly the moisture content and air phase of soils.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.3
• /
• pp.145-152
• /
• 2000

The total acreage of 4,894ha of upland soils in Yeongyang area, the main crop cultivated were red-pepper. They were distributed mainly on local valleys and alluvial fans(54.9%), about 61.2% had 7~15% slopes, and about 73.2% had fine loamy family in soil texture. the soils were classified into Ochrepts(73.7%). Udalfs(16.9%), Fluvents(6.2%) and Psamments(3.2%) etc. The upland soils with 100~250m in altitude and "moderately well drained" had higher contents in inorganic nutrients. The red-pepper Produced in the high altitude(>400m) were lower in quality and yields, while the content of sugar and yields of pepper produced in fine loamy textured soils were higher than other soil textures. The yields of red-pepper produced in the "moderately well drained" soils which had better water supply capacity were higher than "well drained" soils.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.67-73
• /
• 2019

In this study, to optimize the production and utilization of biogas for organic waste resources, the precision monitoring of on-site facilities and the energy balance by facility were analyzed, and the solutions for field problems were investigated, and the design and operation guidelines for pretreatment facilities and generators were presented. Gas pre-treatment is required to solve frequent failures and efficiency degradation in operation of high quality refining facilities, and processing processes such as desulfurization, dehumidification, deoxidization, dust treatment, volatile organic compounds, etc. Since these processes are substances that are also eliminated from the high-quality process, quantitative guidelines are not presented in the gas pretreatment process, but are suggested to operate during the processing process as a qualitative guideline. In particular, dust, siloxane, and volatile organic compounds are the main cause of frequent failure of high-quality processes if they are not removed from the gas pretreatment process. Design of the biogas high-quality process. The operation guidelines provide quality standards [Methane content (including propane) of 95% or more] with 90% or more utilization of the total gas generation, two systems, and a margin of 10% or more. It also proposed installing gas equalization tank, installing thermal automatic control system for controlling equalization of auxiliary fuel, installing dehumidification device at the back of high quality for removing moisture generated in the process of gas compression, installing heat-resisting facilities to prevent freezing of facilities in winter and reducing efficiency, and installing membrane facilities in particular.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.390-398
• /
• 2018

Miscanthus is a perennial energy plant that reproduces via rhizomes and has C4 metabolism. The flowering pattern of a wild type M. sacchariflorus (WTM) is affected by environmental conditions such as photoperiod and soil water status. Geodae-Uksae 1 (Geodea), which is a new M. sacchariflorus cultivar, has a lower heading rate than WMS; however the mechanism with why this happens is unknown. To confirm the effects of drought or waterlogging stresses on the growth of WTM and Geodea at the reproductive stage, we investigated variations in morphological characteristics and nutrient contents of the two Miscanthus species after four months of three water treatments. Morphological traits of the two Miscanthus species under the drought condition were similar to those under the control condition. But, the height of Geodea increased by 30% in response to the waterlogging stress. In WTM, the heading rate under the drought condition was lowest, while there was no significant difference between the waterlogging and control conditions. In the two Miscanthus species, nutrient contents, such as sucrose, total N, $P_2O_5$, K and Mg, were the highest under the drought condition, wherea Ca and Mg contents under the waterlogging condition were more than three times lower than those under the drought condition. The current study results showed that drought stress accelerated senescence and then inhibited nutrient mobilization in WTM, while waterlogging stress promoted the growth. This study is the first report to confirm that waterlogging stress promotes flowering of M. sacchariflorus.

• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.213-223
• /
• 2022

This study was conducted to establish a Habitat Suitability index (HSI) based on literature research and field surveys on ecology and habitat of 'Hynobius leechii'. And this study will be used as basic data for qualitative evaluation of habitat environment. The survey sites were divided into natural habitats close to the prototype habitat and artificial restoration areas where Hynobius leechii was monitored. So the types of habitats were diversified. Hynobius leechii is a vulnerable species to climate change because it is affected by the microhabitat and has low mobility. HSI variables of Hynobius leechii were extracted through domestic and overseas literature, and standards were extracted from literature research and field survey. The standards were presented as a value of the physical allowable category in consideration of realization. To verify the study, an in-depth consultation was conducted by amphibians experts. HSI variables of Hynobius leechii were included 9 variables such as Overstory canopy cover(%), Understory cover(%), Water-pH, Soil-pH, Soil relative humidity(%), Leaf litter depth(cm), Rock substrates (%), Type of Coarse woody, Distance from Street or Pollutant(m).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.112-118
• /
• 1987

This study was carried out to investigate the effects of early planting and polyethylene film (P.E) mulch on early maturing soybean of Korean native cultivar Kyeonggi No. 114 in the Kyeonggi area. It was planted four times at the ten days interval from April I to April 30 in 1985 and 1986. The average soil temperature was 1-5$^{\circ}C$ higher under the polyethylene film mulch condition than the conventional cultural practice condition. Soil moisture content also was higher under P.E mulch condition. Days to emergence was shortened 5-16 days and days to flowering was shortened 3-5 days. The fresh pod yield was increased 12% more at the planting date of April 1 and April 10. Income was increased 70, 83, more at the planting date of April 1 and April 10 under the polyethylene mm mulch conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.783-789
• /
• 1997

This study was conducted to identify leakage of fluorescent substances out of 56 crops and to develop sorting methods of nonviable seeds of Chinese cabbage. Fluorescent substances were detected from 36 species, Chinese cabbage, radish, broccoli, cauliflower, egg plant and rape seed etc. In Chinese cabbage, the germination rate of non-sorted seeds decreased rapidly with ageing of seeds at 45$^{\circ}C$ and 100％. After Chinese cabbage seeds soaked for 4hrs and coated with cellulose, the sorting ratio of non fluorescent seeds were decreased 91.3％ to 1.7％ by increasing ageing periods from control to 8 days, while fluorescent seeds were increased drastically from 8.7％ to 98.3％. Also, incubation of water soaked dead seeds of Chinese cabbage treated with 0.5-1.0％ ninhydrin and 0.01N sodium thiosulfate for 30~60 minutes at 35$^{\circ}C$ developed purple color.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.1
• /
• pp.15-25
• /
• 2023

Recent weather changes have led to an increase in heavy rainfall resulting in frequent large-scale slope failures. To minimize damage to life and property, a measurement system is used in slope failure warning systems. However, understanding the slope failure behavior is difficult as the measurement system only measures a specific point. Therefore, numerical analysis must be p erformed with the measurement system. The soil water characteristic curve (SWCC) drying curve and boundary conditions that consider evapotranspiration and precipitation have been applied to numerical analysis, but the hysteresis of SWCC affects the numerical analysis results. To address this, a new evapotranspiration calculation method is proposed and applied to boundary conditions, and the measurement data are compared with the results of the numerical analysis. This method takes into account the different infiltration behaviors on evapotranspiration according to the drying and wetting curves of the SWCC, and allows for a more rational prediction of water movement on unsaturated slopes.

• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.196-205
• /
• 2023

Water-dispersed pigment is on-going study for without air pollution in the textile and print industry. Primer treatment is essential for the substrate to improve the printing quality of eco-friendly water-dispersed pigment ink. Otherwise in the case of untreated primer, the water-dispersed pigment ink will dry onto the surface and cause defective images. This study was conducted on film substrate coating (primer) to fix eco-friendly water-dispersed pigment ink on film substrate. The drying, bleeding, and color strength of the pigment ink were examined depending on the composition and mixing ratio of the coating solution. The mixing ratio of silica gel in the coating film is increased to 0, 0.5, 1, 2 and 3 and results that DK-1-3 of silica gel ratio of 1 showed the lowest bleeding such as 52%, the letter thickness of 0.76mm and DK-1-5 of SG ratio of 3 showed the highest bleeding such as 304%, the letter thickness of 2.02mm. The mixing ratio of SPA in the coating film is increased to 2.5, 5, 7.5, SPA ratio of 7.5 has a bleeding ratio of 9% and letter thickness of 0.544mm. It showed the closest value to 0.5mm. According to the result, the optimal mixing ratio of binder, polymer coagulant, silica gel is 100:7.5:1.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.76-81
• /
• 2024

Recently, agricultural methods are changing from experience-based agriculture to data-based agriculture. Changes in agricultural production due to the 4th Industrial Revolution are largely occurring in three areas: smart sensing and monitoring, smart analysis and planning, and smart control. In order to realize open-field smart agriculture, information on the physical and chemical properties of soil is essential. Conventional physicochemical measurements are conducted in a laboratory after collecting samples, which consumes a lot of cost, labor, and time, so they are quickly measured in the field. Measurement technology that can do this is urgently needed. In addition, a soil analysis system that can be carried and moved by the measurer and used in Korea's rice fields, fields, and facility houses is needed. To solve this problem, our goal is to develop and commercialize software that can collect soil samples and analyze the information. In this study, basic soil composition measurement was conducted using soil composition measurement sensors consisting of hardness measurement and electrode sensors. Through future research, we plan to develop a system that applies soil sampling using a CCD camera, ultrasonic sensor, and sampler. Therefore, we implemented a sensor and soil analysis UI that can measure and analyze the soil condition in real time, such as hardness measurement display using a load cell and moisture, PH, and EC measurement display using conductivity.