• Journal of Korean Society of Forest Science
• /
• v.44 no.1
• /
• pp.26-35
• /
• 1979

Factors affecting the survival of out planted Cryptomena and Japaneses Cypress seedlings. (I) - Especially on the drying and water soaking duration ­ There are often the cases of poor survival percentage for the economic forest establishments of Cryplomeria japonica D. Don. and Chamaecyparis obtusa End. This study was carried out to investigate the survival factors of both 1-1 seedlings and Cryptomena cutting Seedlings by room drying conditions, day drying conditions, OED green water soaking treatment and drying duration at the forest nursery of Chonnam National University from February to September. 1979. The results are as follows: 1. From 11 a.m. to 3 p.m. fluctuation in then moisture contents(MC) rapidly decreased and M.C. fluctuation in indoor until 5 p.m. showed the same results with the amount of an hour fluctuation in outdoor. 2. M.C. fluctuations between OED green and non-treatment of these seedlings were silghtly different. 3. The survival percentage of OED green and non-treatment of seedlings were highly significant in the room drying conditions and the day drying conditions respectively The effects of water soaking treatment on rooting was negligible. The survival percentage of seedlings of OED green was higher than that of non-treatment. 4. Although survival percentage of Japanese Cypress was almost in accord with Cryptomena, the power of resistance to drying was lower m Japanese Cypress than m Cryptomeria. 5. Compared with Cryptomena seedlings the survival percentage of Cryptomeria cutting seedlings was higher and not influenced at all in case of being drying for two hours; but it was highly significant in interactions between the drying time and the water soaking time. 6. When Cryptomena and Japanese Cypress seedling become drying in indoor for four days, the survival percentage remarkably reduced after two days and also was highly significant among numbers of drying days.

• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.259-270
• /
• 2020

Extreme weather events, such as heat and drought, have occurred frequently over the past two decades. This has led to continuous reports of cases of forest damage due to physiological stress, not pest damage. In 2014, pine trees were collectively damaged in the forest genetic resources reserve of Sogwang-ri, Uljin, South Korea. An investigation was launched to determine the causes of the dieback, so that a forest management plan could be prepared to deal with the current dieback, and to prevent future damage. This study aimedto 1) understand the topographic and structural characteristics of the area which experienced pine tree dieback, 2) identify the main causes of the dieback, and 3) predict future risk areas through the use of machine-learning techniques. A model for identifying risk areas was developed using 14 explanatory variables, including location, elevation, slope, and age class. When three machine-learning techniques-Decision Tree, Random Forest (RF), and Support Vector Machine (SVM) were applied to the model, RF and SVM showed higher predictability scores, with accuracies over 93%. Our analysis of the variable set showed that the topographical areas most vulnerable to pine dieback were those with high altitudes, high daily solar radiation, and limited water availability. We also found that, when it came to forest stand characteristics, pine trees with high vertical stand densities (5-15 m high) and higher age classes experienced a higher risk of dieback. The RF and SVM models predicted that 9.5% or 115 ha of the Geumgang Pine Forest are at high risk for pine dieback. Our study suggests the need for further investigation into the vulnerable areas of the Geumgang Pine Forest, and also for climate change adaptive forest management steps to protect those areas which remain undamaged.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.406-411
• /
• 2011

This study was conducted to find out the effect of cut-off period (0 hour, 3 hours, 6 hours, 12 hours, and 24 hours) to supply nutrient solution for chicon forcing at that was predrying treatment on the storability of chicon. The cut-off treatment increased dry matter rate, respiration rate, and ethylene production rate. The dry matter rate of chicon increased, as the cut-off period increased, but the respiration rate and ethylene production rate of chicon was highest in 12 hours and 6 hours cut-off treatment, respectively, and then their rates decreased, as the cut-off period prolonged. The weight loss at cut-off 6 hours treatment was lower than other treatments during $10^{\circ}C$ storage temperature. The cut-off 6 hours treatment showed higher carbon dioxide and oxygen concentration in 10,000 cc/$m^2$/day/atm oxygen permeability film package during storage period than control and showed a little predrying effect but was not statistically significant. At $4^{th}$ day, the ethylene concentration reached higher than other storage day and after that decreased but was not statistically significant. The quality of chicon for 3 hours, 6 hours, 24 hours cut-off treatments on storability showed higher than other treatments, accordingly. The 6 hours cut-off treatment showed the inhibited effect of the degree of browning of chicon cutting plane. The effect of 6 hours cut-off treatment on storability of chicon showed proper predrying effect, reduced moisture loss and browning inhibition apparently during $10^{\circ}C$ storage.

• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.442-458
• /
• 2011

Among Cucubitaceae, melon (Cucumis melo) is one of the most diversified fruits, with various forms, sizes, pulps, and peel colors, In addition, it is a commercially important crop because of its high sweetness, deep flavor, and abundant juice. In the species, there are both climacteric and non-climacteric melons depending on the respiration and ethylene production patterns after harvest. Ethylene is also considered a crucial hormone for determining sex expression, Phytohormones other than ethylene interact and regulate ripening, There are some indices that can be used to evaluate the optimum harvest maturity. The harvest time can be estimated after the pollination time, which is the most commonly used method of determining the harvest maturity of the fruit. Besides the physiological aspects, the biochemical alterations, including those of sweetness, firmness, flavor, color, and rind, contribute to the overall fruit quality. These changes can be categorized based on the ethylene-dependent and ethylene-independent phenomena due to the ethylene-suppressed transgenic melon. After harvest, the fruits are precooled to $10^{\circ}C$ to reduce the field heat, after which they are sized and packed. The fruits can be treated with hot water ($60^{\circ}C$ for 60 min) to prevent the softening of the enzyme activity and microorganisms, and with calcium to maintain their firmness. 1-methylenecyclopropene (1-MCP) treatment also maintains their storability by inhibiting respiration and ethylene production. The shelf life of melon is very short even under cold storage, like other cucurbits, and it is prone to obtaining chilling injury under $10^{\circ}C$. In South Korea, low-temperature ($10^{\circ}C$) storage is known to be the best storage condition for the fruit. For long-time transport, CA storage is a good method of maintaining the quality of the fruit by reducing the respiration and ethylene. For fresh-cut processing, washing with a sanitizing agent and packing with plastic-film processing are needed, and low-temperature storage is necessary. The consumer need and demand for fresh-cut melon are growing, but preserving the quality of fresh-cut melon is more challenging than preserving the quality of the whole fruit.

• Food Science and Preservation
• /
• v.21 no.4
• /
• pp.451-459
• /
• 2014

The aim of this study was to provide useful information for making guide of quality index of Korean red pepper. The results of physicochemical characteristics analysis showed the moisture content of air-dried and sun-dried red pepper were 10.38~15.60% and 9.46~17.22%, which show that 50% of the 40 samples exceeded the 13% KS moisture standards of red pepper powder. The capsaicinoids content of the air-dried and sun-dried samples were 10.85~126.39 mg% (1,627~18,958 Scoville heat unit) and 0.43~164.09 mg% (64.5~24,613.5 Scoville heat unit). A wide distribution of ASTA values was observed: 49.12~154.69 and 70.08~182.13 for air-dried and sun-dried red pepper, respectively, with 9.29~23.10% free sugar, and 0~1,050 mg% of ascorbic acid. The total viable cells of the air-dried red peppers were 2.01~6.67 log CFU/g and of sun-dried red peppers, 1.74~5.77 log CFU/g. The contamination level of yeast in the samples were 1.03~4.12 log CFU/g of the air-dried samples and 1.05~6.10 log CFU/g of the sun-dried samples. Among the foodborne pathogens, Clostridium perfringens and Bacillus cereus were detected in many red pepper samples regardless drying method. In the principal component analysis, the first (PC1) and second principal components (PC2) accounted for 56.78 % of the total variances (38.47% and 18.31%, respectively). Ascorbic acid, ASTA, color value (L, a, b) were strongly correlated with the PC1, and quality characteristics such as moisture, microorganism, sample (drying method) showed a negative correlation with the PC1.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.685-695
• /
• 2004

The aim of this study was to evaluate the resistance to degradation and to compare the wear resistance characteristics of four composite resins in an alkaline solution. The resistance to degradation was evaluated on the basis of mass loss(%), degradation depth(${\mu}m$), Si loss(ppm) and wear depth. The brands studied were Heliomolar flow, Filtek supreme, Point4, Tetric flow. The results were as follows: 1. The sequence of the mass loss was in descending order by Heliomolar flow, Filtek supreme, Point4, Tetric flow. There was significant differences among the materials except Heliomolar flow and Filtek supreme. 2. The sequence of the degree of degradation layer depth was in descending order by Filtek supreme, Heliomolar flow, Tetric flow, Point4. There were significant differences among the materials except Heliomolar flow and Tetric flow. 3. The sequence of Si loss was in descending order by Filtek supreme, Heliomolar flow, Point4, Tetric flow. There were significant differences among the materials except Point 4 and Tetric flow. 4. The sequence of maximum wear depth was in descending order by Heliomolar flow, Point4, Fillet supreme, Tetric flow and there was increasing wear depth on soaking in 0.1N NaOH solution. 5. When observed with SEM, destruction of bonding between matrix and filler was observed and when observed with CLSM, the depth of degradation layer of specimen surface was observed. There results indicate that wear and hydrolytic degradation could be considered to be evaluation factors of composite resins.

• The Korean Journal of Mycology
• /
• v.34 no.1
• /
• pp.39-53
• /
• 2006

This studies investigated the effect of concentrations of sodium chloride (NaCl) on occurrence and growth of fruitbody in oyster mushrooms, Pleurotus spp. Our experiments divided into two parts. When the water contents in substrate were added with sodium chloride solution in cotton waste box cultivation as a first experiment, the growth of mushroom was damaged as the concentration was increased, even though there was a little difference according to the strains. The yield in 1.0% NaCl solution was decreased to 72% compared to non-treated plot while that in 3.0% solution was only 2% of the non-treated plot. Morphological characteristics of mushrooms cultivated in substrate with the different concentration of the solution showed different results. For example, the size and thickness of pilei were not influenced by NaCl concentration, but the length of stipes and individual weight were much influenced. In plastic box cultivation filled with cotton waste, watering treatment with the different concentrations of sodium chloride solution, the second experiment, did not show any difference according to the concentration until 1.0% solution but there was a little difference according to the strains. The productivity of fruitbody started to decrease at 2.0% of the solution and the yield and quality of mushroom in 3.0% solution treatment were generally low. After the second flush, days for mushroom sprouting were generally prolonged in proportion to the solution concentration. Taken altogether, the second experiment did not show a clear effect as the case of the first experiment.

• Food Science and Preservation
• /
• v.14 no.3
• /
• pp.301-307
• /
• 2007

To efficiently use Korean mung beans, the functional characteristics of mung bean powder(A), unhydrolyzed mung bean flour(B), and mung bean flour hydrolyzed under optimum conditions(C), were compared. The contents of protein, fat, carbohydrate, ash, and water, did not vary greatly with different treatment methods. The color values of (B) and (C) were similar, while the L value of (A) was higher than those of the other samples. Thereducing sugar content of (C) was highest at 292.63 mg%, while the total phenol contents of (A) and (C) were similar at 38.63 mg% and 38.38 mg%, respectively. The molecular weight of (A) was under 17 kDa by SDS-PAGE, and was lower than the molecular weights of the other samples (B, C), which generally ranged from 17 kDa to 72 kDa. The free sugar content of (C) was highest at 1,125.16 mg%, while (A) and (B) yielded values of 86.36 mg% and 54.20 mg%, respectively. Total free amino acid contents were in the order(C)(B)(A), and were 22,116.35 mg%, 2,731.29 mg%, and 578.54 mg%, respectively. The amino acid content of (C) was 8,231.42 mg% and was higher than those of (A) or(B). The DPPH free radical scavenging abilities of (A) and (C) were high, at 62.1% and 57.63%, respectively, while (B) showed a lower value at 19.26%. Fibrinolytic activity was highest(24.01%) in (C), and was 20.69% in (A) and 18.06% in (B). The above results indicate that mung bean flour hydrolyzed under optimal conditions (C) had the highest functional and quality characteristics, in comparisonh with unhydrolyzed flour (B) and mung bean powder (A). Diverse applications of hydrolyzed mung bean flour are anticipated.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.301-308
• /
• 2012

Near infrared reflectance spectroscopy (NIRS) has become increasingly used as a rapid and accurate method of evaluating some chemical compositions in forages. This study was carried out to explore the accuracy of near infrared spectroscopy (NIRS) for the prediction of chemical parameters of Italian ryegrass silages. A population of 267 Italian ryegrass silages representing a wide range in chemical parameters and fermentative characteristics was used in this investigation. Samples of silage were scanned at 2 nm intervals over the wavelength range 680~2,500 nm and the optical data recorded as log 1/Reflectance (log 1/R) and scanned in intact fresh condition. The spectral data were regressed against a range of chemical parameters using partial least squares (PLS) multivariate analysis in conjunction with spectral math treatments to reduced the effect of extraneous noise. The optimum calibrations were selected on the basis of the highest coefficients of determination in cross validation ($R^2$) and the lowest standard error of cross validation (SECV). The results of this study showed that NIRS predicted the chemical parameters with very high degree of accuracy. The $R^2$ and SECV were 0.98 (SECV 1.27%) for moisture, 0.88 (SECV 1.26%) for ADF, 0.84 (SECV 2.0%), 0.93 (SECV 0.96%) for CP and 0.78 (SECV 0.56), 0.81 (SECV 0.31%), 0.88 (SECV 1.26%) and 0.82 (SECV 4.46) for pH, lactic acid, TDN and RFV on a dry matter (%), respectively. Results of this experiment showed the possibility of NIRS method to predict the chemical composition and fermentation quality of Italian ryegrass silages as routine analysis method in feeding value evaluation and for farmer advice.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.288-292
• /
• 2008

This study was conducted to identify the effects of irrigation amount to produce high quality melon fruit in fertigation culture. Irrigation amount of during fruit harvesting period was doubled at the low irrigation point ($(-45{\sim}50\;kPa$) treatment as 115 mm as than that of the high irrigation point ($-20{\sim}25\;kPa$) treatment. The plant growth rates such as stem length, leaf weight and plant height were a little diminished at the low irrigation point ($-45{\sim}50\;kPa$) than those of the other treatments. Internode length was however not affected by irrigation amount. Fruit weight was lighter at the low irrigation point ($-45{\sim}50\;kPa$) than that of at the high irrigation point and fruit height was shorter, but fruit diameter was not affected by irrigation amount. Fruit soluble solid was $0.9^{\circ}Bx$ higher at the low irrigation point ($-45{\sim}50\;kPa$) than at the high irrigation point ($-20{\sim}25\;kPa$) and net index was higher. Total marketable yield was highest by 3,937 kg/10a at the high irrigation point ($-20{\sim}25\;kPa$), but the excellent marketable yield was highest by 2,531 kg/10a at the low irrigation point ($-45{\sim}50\;kPa$). Inorganic contents of the soil N, K, Ca and Mg were not affected by irrigation amount. It was therefore thought that optimum irrigation point to produce high quality melon fruit by fertigation culture was $-45{\sim}50\;kPa$ at ripening stage.