• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2A
• /
• pp.297-304
• /
• 2008

It is well known that cracks in concrete decrease permeability and durability of concrete because cracks enhance the penetration of water or corrosive chemicals like as chlorides, carbon dioxides, sulfates and some others. But some of cracks in hardened cements may be sealed in case of contacting water. This phenomenon is called "self healing" and it has a close relation to hydration products newly formed on surfaces of cracks. Many studies on self healing in concretes commonly showed that CSH gel has been observed on crack surfaces. And some studies have reported that calcium hydroxides and ettringite were observed as well as CSH gel on crack surfaces. This study was carried out to investigate hydration products formed by self healing process and also examine the influence of waterproof admixture for concretes on self healing of cement. As a result of XRD, DSC, SEM and EDX analysis of crack surfaces, it was found that self healing of cement was related to CSH gel, calcium hydroxides and ettringite. And waterproof admixture increased fibrous (needle-like) hydration products which were in network form. It is estimated that such fibrous products are effective for self healing process of cement system.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.289-298
• /
• 2023

In this study, the development of a self-healing concrete waterproofing agent was examined, focusing on its manufacturing and waterproofing properties. The optimal ratio using microcapsules for the concrete waterproofing agent was determined through assessments of flow, compressive strength, and permeability conducted during the mortar stage. These findings aimed to provide fundamental data for evaluating the self-healing properties of the concrete waterproofing agent designed for use in concrete structures. The self-healing concrete waterproofing agent was comprised of three types of inorganic materials commonly used for repair purposes. From experimental results, a composition ratio with a high potassium silicate content, referred to as SIM-2, was found suitable. A surfactant mixing ratio of 0.03 % was identified to enhance the dispersibility of the concrete waterproofing agent, while a mixing ratio of 0.2 % distilled water was deemed suitable for viscosity adjustment. For the magnetic self-healing concrete waterproofing agent's healing agent, using microcapsules in the range of 0.5 % to 0.7 % met the KS F 4949 and KS F 4926 standards.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.12-23
• /
• 2024

In this study, a structural concrete square beam was developed using the centrifugal molding technique. In order to secure the bending stiffness of the cross section, the hollow rate of the cross section was set to 10% or less. Instead of using the current poor mixture of concrete and a concrete mixing ratio with a high slump (150-200) and a design strength of 100 MPa or more was developed and applied. In order to investigate the durability of centrifugally formed PSC square beams to be used as the superstructure of the avalanch tunnel or ramen bridge, the durability performance of ultra-high-strength centrifugally formed concrete with a compressive strength of 100 MPa was evaluated in terms of deterioration and chemical resistance properties.Concrete durability tests, including chloride penetration resistance, accelerated carbonation, sulfate erosion resistance, freeze-thaw resistance, and scaling resistance, were performed on centrifugally formed square beam test specimens produced in 2022 and 2023. Considering the information verified in this study, the durability of centrifugally molded concrete, which has increased watertightness in the later manufacturing stage, was found to be superior to that of general concrete.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.3
• /
• pp.99-108
• /
• 2016

The shuttle breeding of Korean winter wheat has been able to develop high-yielding and day-length-intensive varieties with a wide range of ecologic adoption. However, the phenology of winter wheat has been changed due to recent rises in the winter temperature of Toluca and increasing frequency of high temperatures. We defined two wheat groups (group II and III) with vernalization and evaluated the impact of cold exposure duration and heading ratio due to changes in sowing dates by measuring changes in cold exposure duration and corresponding heading states of each group. The wheat cultivars were sown on three dates in two years. The cold exposure requirement of wheat sown on 6 November 2013 was unfulfilled. The cold exposure requirement of wheat sown on 22 November and 6 December 2013 was fulfilled. However, in 2014, the cold exposure requirement of wheat sown on 5 and 20 November was fulfilled, but that of wheat sown on 5 December was unfulfilled. The differences for the two early November sowings were because winter temperature rises, which caused high temperatures in 2013, whereas early November 2014 saw normal temperatures for the area. The heading ratio of group II did not show a clear difference among the three sowing dates, while the heading ratio of group III was reduced by about half. This implies that the efficiency of shuttle breeding of group III will be high since it showed strong sensitivity to changes in sowing dates. We calculated future sowing dates of each group under near future climate scenarios; the future available sowing dates of group II were projected, but the dates of group III were never estimated in the temperature rise scenario in Toluca. Our findings suggest that change of sowing dates should be considered in the strategy for shuttle breeding of Korean winter wheat.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.4
• /
• pp.1798-1802
• /
• 1969

The experiment was carried out as one of the basic studies to improve the alkali-resistance of cement mortars and it was conducted to investigate some propetties of mortars relating to weight losses when exposed to 0.1 N salution of sodium hydroxide. The experiment and the results obtained are summarized as follow; 1. The specimens used in this experiment were made of 5 centi-meter cubes of mortar having such various ratios of mix by weight as 1 : 1, 1 : 3, 1 : 5, 1 : 7 and 1 : 10. 2. Physical tests included compressive strengths at 7 days, 28 days, 3 months, and 6 month, and 5 hour boiling absorption test. 3. In alkali test, every specimen was immersed into 0.1 N solutions of sodium hydroxide. The specimens exposed to the alkali solution were weighed to determine the weight losses of the alkail-corroded at one week interval for 7 week's exposure and the old alkali solutions were also changed to fresh solutions when weighed the weight losses by alkali attack at one week interval. 4. According to the alkail test after 7 week's exposure, no weight losses were observed on ratios of mix 1:1 and 1:3 and slight weight losses occurred on ratios of mix 1:5 and 1:7, but relatively large amount of weight losses were showed by 36.6 per-cent on ratios of mix 1:10. It was also found that the weight losses of the alkali-corroded were extremely lower than those of the acid-corroded at the some concentrations as 0.1 N of solutions. 5. In order to make better quality of alkali-resistant mortar it might recomend that a 1:7 mix or richemixes, use of small amount of mixing water for watertight, 20 per cent or less absorption by 5 hour boiling 1,600 kirogram per cubic meters or denser densities by absolute dry base are available for physical properties of mortar. It could conclude acid-resistant mortars were so high alkali-resistant, that it is expected to make and improve the acid-resistant mortars for getting rid of damages by alkali attack.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.1-8
• /
• 2010

The purpose of the study was to evaluate the influence of landscaping pavements on WBGT(Wet-Bulb Globe Temperature) of outdoor spaces that lack ventilation and shade at summer midday. The relative humidity(RH), dry-bulb temperature(DT) and globe temperature(GT) were recorded every minute from June to October 2009 at a height of 1.2m above ten experimental beds with different pavements, by a measuring system consisting of an electric humidity sensor(GHM-15), resistance temperature detector(RTD, Pt-100), standard black globe(${\phi} 150mm$) and data acquisition systems(National Instrument's Labview and Compact FieldPoint). Additionally, the surface dry-bulb temperatures also were recorded and compared. The area of each experimental bed was 1.5m(W)${\times}$2.0m(L) and ten different kinds of pavement were used including grass, grass+cubic stone, grass+porous brick, brick, stone panels, cubic stone, interlocking blocks, clay brick, naked soil, gravel and concrete. To prevent interference from ventilation, a 1.5m height cubic steel frame was established around each bed and each vertical side of the frame was covered with transparent polyethylene film. Based on the records of the hottest period from noon to 3 PM on 26 days with a peak dry-bulb temperature over $30^{\circ}C$ at natural condition, the wet-bulb temperature(WT) and WBGT were calculated and compared. The major findings were as follows: 1. The average surface DT was $40.1^{\circ}C$, which is $9^{\circ}C$ higher than that of the natural condition. The surface DT of the pavements with grass were higher than those of concrete and interlocking block. The peak DT of the surface almost every pavement rose to above $50^{\circ}C$ during the hottest time. 2. The averages of DT, WT and GT were $40.1^{\circ}C$, $27.5^{\circ}C$ and $49.1^{\circ}C$, and the peak values rose to $48.1^{\circ}C$, $45.8^{\circ}C$ and $59.5^{\circ}C$, respectively. In spite of slight differences that resulted according to pavements, no coherent differentiating factor could be found. 3. The average WBGT of grass was the highest at $34.3^{\circ}C$ while the others were similar in the range of around $33{\pm}1^{\circ}C$. Meanwhile, the peak WBGT was highest with stone panel at $47.9^{\circ}C$. Though there were some differences according to pavements, and while grass seemed to be worst in terms of WBGT, it seems difficult to say ablolutely that grass was the worst because the measurement was conducted without ventilation and shade during summer daytime hours only, which had temperatures that rose to a dangerous degree(above $45^{\circ}C$ WBGT), withering the grass during the hottest period. The average WBGT resulted also showed that the thermal environment of the pavement without ventilation and shade were at an intolerable level for humans regardless of the pavement type. In summary, the results of this study show that ventilation and shade are more important factor than pavement type in terms of outdoor thermal comfort in summer daylight hours.

• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.190-198
• /
• 2010

This study was conducted to examine the effects of dams on benthic macroinvertebrate communities in Korean streams and rivers. Four low-head dams and three large dams were studied throughout South Korea. Sampling was taken at immediately upper (impoundment), lower (riffle area), and control (riffle area) sites from the dams during 2004-2007. The upper sites, of which substrate heterogeneity and velocity were relatively low, showed a lower degree of species richness, density, and diversity indices, which is very different from the lower and control sites. Heavily polluted streams showed a lesser degree of community differences between the upper and lower sites. In the large dams, the upper and lower sites showed very low values of species diversity indices and very high values of dominance indices compared to the control sites. In the low-head dams, however, the difference of degree of the values was relatively smaller. Compositions of the functional feeding groups and the habitat orientation groups were relatively simpler at the upper sites than at the lower sites and the degree of difference was greater in the large dams. Species richness and community indices of benthic macroinvertebrates were more significantly affected by habitat characteristics than water quality at the upper sites; however, those were more significantly related with water quality at the lower sites. In conclusion, large and low-head dams could simplify stream habitats particularly at the upper sites (impoundment), and they negatively affected on the benthic macroinvertebrate communities inhabited the habitats. The impact was larger in the large dams than in the low-head dams.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.3
• /
• pp.191-199
• /
• 2007

Seasonal variation in species composition of fish in the Saemangeum Reservoir was determined using seasonal samples collected by an otter trawl from April 2006 to February 2007 after the dike construction, and compared with the data obtained during the dike construction in 2001-2002. A total of 35 species, 8,960 individuals and 53,084.4 g of fish were collected during the study. Of the fish collected, brackish and coastal fishes such as Konosirus punctatus, Synechogobius hasta and Repomucenus lunatus, and migrant fishes such as Engraulis japonicus and Scomberomorus niphonius predominated in abundance accounting for 95% in the total number of individuals. Fish species composition and abundance showed a similar seasonal trend to those in the other western coastal waters of Korea. The resident species were mainly collected in spring and in autumn. The number of species and biomass were high in summer by the large amount of catch of migrating species. Catch was low in winter and only 2 species were collected. A brackish and coastal fish, K. punctatus and two migrant fishes, E. japonicus and S. niphonius were abundantly collected after the dike construction. However, the dominant fishes during the dike construction such as Leiognathus nuchalis, Neosalanx jordani and Chaeturichthys stigmatias were rarely collected. Fish density was $1,149\;inds./10,000m^2\;and\;12,644g/10,000m^2$ during the dike construction, and increased 6 times in the number of individuals ($7,467\;inds./10,000m^2$) and 3 times in biomass ($44,237g/10,000m^2$) after the dike construction. Annual species richness (R) and species diversity (H') decreased from R=0.0160 and H'=2.47 during the dike construction in 2001-2002 to R=0.0038 and H'=1.11 after dike construction in 2006-2006, respectively. These changes seemed to be related to the reduction of the saline area and degradation of water quality in Semangeum Reservoir after the dike construction.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.61 no.1
• /
• pp.16-29
• /
• 2024

2014년 4월 18일 오전 8시 48분경 전라남도 병풍도 인근 해역에서 세월호는 전복된 후 침몰하였다. 사고 당시 이 배에는 승객 443명과 선원 및 승무원 33명 모두 476명이 타고 있었고, 이 중 미수습자 5명을 포함하여304명이 생명을 잃었다. 그 동안 공식적인 사고원인 규명활동이 꾸준히 진행되어 이 사고의 원인을 규명하기 위한 조사가 네 차례 있었다. 하지만 아직까지 사고 원인이 무엇인지 명쾌하게 밝혀지지 않고 있다. 이 글에서는 먼저 그동안 있었던 네 차례의 공식적인 세월호 사고원인 규명활동을 정리하였다. 가장 먼저 사고원인 규명활동을 전개한 해양안전심판원 특별조사부는 2014년 사고 직후부터 그해 12월까지 활동하였다. 특별조사부 최종보고서에는 화물의 과적과 평형수 적재 부족으로 인한 선박복원성 기준 미달, 타각의 대각도 조타와 장시간 유지로 인한 부적절한 조타, 화물의 부실한 고박으로 인한 화물의 이동, 수밀문의 관리 부실로 인한 조기 침수와 비상대피장소(muster station)로의 승객대피 조치 미이행을 사고의 원인으로 들고 있다. 2015년 3월부터 2016년 6월까지 활동한 4·16세월호참사 특별조사위원회(특조위)는 '4·16 세월호 참사 특별 조사위원회 청산 백서'만을 간행하고 최종보고서를 제출하지 못한 채 활동을 종료하였다. 세월호 선체조사위원회(선조위)는 2017년 4월부터 2018년 8월까지 활동하였다. 선조위는 세월호 사고원인 규명을 위한 다른 기구에 비해 위원의 구성도 균형이 있었고, 직권사건 위주의 조사방법도 적절하였다. 또한 조타기와 조타 과실 여부, 급선회 항적 및 횡경사와 핀안정기의 물리적 손상에 관한 용역을 국내 여러 기관에 발주하였다. 뿐만 아니라 다양한 해양사고 원인규명 용역에 참여한 실적이 있는 영국의 기술용역회사인 Brookes Bell에 급선회와 빠른 침몰의 원인 조사를 요청하였다. 아울러 세계에서 가장 활발히 수조실험을 수행하고 있는 상업 연구소인 네덜란드의 MARIN에 수조시험과 시뮬레이션도 의뢰하였다. 하지만 아쉽게도 선조위는 서로 다른 사고 원인을 주장하는 두 권의 종합보고서를 간행하였다. 종합보고서로 '내인설' 종합보고서[6]는 타기 솔레노이드 밸브의 고착으로 시작된 급선회를 사고의 직접 원인으로 지목하고 있다. 하지만 '열린안' 종합보고서[7]에서는 수중체와의 충돌을 직접적인 사고 원인으로 밝히고 있다. 마지막으로 가습기살균제 사건과 4·16세월호 참사 특별조사위원회(사참위)가 2019년 3월부터 2022년 9월까지 활동하였다. 사참위는 위원으로 조선해양공학과 항해학 전문가가 포함되어 있지 않아 세월호의 사고원인 규명활동을 효과적으로 수행하기에는 적절하지 못하였다. 사참위는 주로 조타장치 고장에 따른 세월호 전타 선회현상 검증, 세월호 변형 손상부의 확인 및 원인 조사와 세월호 횡경사 원인과 침수과정 분석을 직권 과제로 추진하였다. 또한 네덜란드 MARIN에 자유항주시험을 추가로 의뢰하였으며, 핀란드의 NAPA group에도 복원성 계산과 침수해석을 의뢰하였다. 사참위는 선조위의 두 가지 사고원인에 대해 '내인설'의 솔레노이드 밸브 고착은 사고원인일 가능성이 매우 낮고, '열린안'의 수중체와의 충돌 시나리오는 근거가 부족함을 확인하였다. 이상에서 정리한 바와 같이 규명활동이 진행됨에 따라 사고원인이 수렴되어야 함에도 불구하고 아직까지 원인을 시원하게 밝히지 못하고 있다. 이 글에서는 사고원인 규명활동을 수행한 네 개 기구의 구성과 활동 내용을 비교하고, 사고조사 위원회의 바람직한 구성과 위원회의 운영 방법을 제시하고 있다. 또한 Brookes Bell 보고서에 수록된 출항 당시의 흘수에 근거한 배수량과 선미 램프의 폐쇄 전후의 횡경사각으로부터 도출한 GoM도 소개하고 있다. 아울러 출항 당시의 GoM값으로 추정한 사고 당시의 GoM값도 소개하고 있고, 수중체와의 충돌 시나리오를 후보 사고 시나리오에서 제외시켜야 할 이유도 열거하고 있다. 끝으로 해양사고 원인규명 활동이 보다 과학적으로 그리고 보다 합리적으로 이루어질 수 있기 위해 그리고 우리 사회의 안전문화 제고를 위한 몇 가지의 방안을 제시하고 있다. 또한 세월호 사고로 치른, 아직도 치르고 있는 희생을 딛고 해양안전문화가 한 걸음 더 나아가기 위해서는 세월호 사고의 원인을 반드시 규명해야 한다는 말씀으로 글을 마무리하고 있다.