• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2017.05a
• /
• pp.175-192
• /
• 2017

4차 산업혁명의 도래와 더불어 ICT 기계, ICT 금융, ICT 의료, ICT 나노 등과 같이 기술분야별 영역의 장벽이 허물어지고, 학제간 연구(Interdisplinary Research)가 일상화됨에 따라 무형자산의 가치평가시에도 융합기술의 가치평가 모형에 대한 니즈가 증대되고 있다. 특히, 기술의 매매, 현물출자, 기술금융(투자유치, 담보 보증), 인수 합병, 청산 소송 등 다양한 용도로 사용되고 있는 기술가치평가 모형은 융합기술의 입력변수 결정에 대한 체계적인 로직을 제공하지 못하고 있는 실정이다. 일반적으로 실제 거래사례가 존재할 경우, 국제가치평가기준(IVS)에 의하면 시장접근법이 우선적으로 적용될 수 있다고 권고된다. 그러나 융합기술의 이전거래를 비롯한 평가 활용사례를 수집하기도 어렵고 그렇다할 평가모델이 존재하지 않는 것이 사실이다. 융합기술에 대한 기술 및 시장의 사업화 환경을 고려하는 경우 소득접근법 기반의 평가기법이 유용하게 활용될 수 있는데, 기술수명, 매출액추정, 할인율, 산업기술요소 등의 핵심변수 결정에 관한 정형화된 로직이 존재하지 않으므로 본 고에서 융합기술 사례에 대해 실용적으로 활용가능한 변수추정 로직을 제시하고자 한다. 기술수명의 경우, 복수 개의 국제특허분류(IPC)별 피인용특허수에 따라 가중 적용하여 수명 추정을 위한 기준값을 정하며, 사업화소요기간 및 비용의 경우 평가대상 융합기술이 속하는 업종별 메타데이터값을 가중평균하여 현금흐름 추정기간을 최종 도출할 수 있다. 소득접근법에서의 매출추정, 할인율, 산업기술요소 변수 추정 이외에도 로열티공제법 적용을 위한 로열티율 결정에 있어서, 융합기술이 응용가능한 산업(업종)별 매출액 기반으로 가중 적용하여 각 변수값을 산출할 수 있다. 본 연구에서 개발된 융합기술 가치평가 모형은 향후 기술의 융복합화 특성을 반영하여 적정 가치를 산출하는 평가 가이드라인을 제공할 수 있을 것으로 기대된다.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.2 s.24
• /
• pp.111-119
• /
• 2005

Although the life-spans of most apartment buildings are over fifty years, they are often demolished and retrofitted only after twenty years, in spite of its remaining life expectancy, resulting in economical waste. The purpose of this paper is to estimate optimum remodeling period of apartment buildings using total cost. In this study it is seen that total sum of running cost of life-span on the buildings is about 4.69 times of initial cost till the fifty years of the life expectancy. The optimum remodeling period of the apartment building is thirty years applying the discount rate of $4.17\%$ and the discount rate should be $6.122\%$ to obtain the forty years of the optimum remodeling period. From the sensitivity analysis based on the change of the discount rates, it is seen that if discount rate decreases the optimum remodeling period can be extended, or vice versa. As a result, a time of the demolished and remodeling can be expected and the basic data can also be established for lengthening life-span of the apartment buildings.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.19-21
• /
• 2012

The engine oil life of internal combustion engine is shorted by the thermal effect and that causes air pollution. In order to measure the status of engine oil accurately, the exchange of new oil extends the life of combustion engine and reduces environmental pollution. Capacitance probes, such as engine oil and fluids can be used to measure the dielectric constant. In this paper, the degradation of engine oil varies depending on the degree of dielectric properties was analyzed. Depending on the state of the oil, the variant capacitance of the probe was measured by LCR Meter, respectively, and then the permittivity of oil was calculated. In addition, according to the size of the probe by measuring the change in capacitance measurement, accuracy of dielectric constant are presented. According to oil contaminated with the more increase in dielectric constant, we can decide that contaminated oil is available.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.225-232
• /
• 2011

Reactive ion etching (RIE) technique for maskless surface texturing of mc-silicon solar wafers has been applied and succeed in fabricating a grass-like black-silicon with an average reflectance of $4{\pm}1%$ in a wavelength range of 300~1,200 nm. In order to investigate the optimized texturing conditions for mass production of high quantum efficiency solar cell Surface characteristics such as the spatial distribution of average reflectance, micrscopic surface morphology and minority carrier lifetime were monitored for samples from saw-damaged $15.6{\times}15.6\;cm^2$ bare wafer to key-processed wafers as well as the mc-Si solar cells. We observed that RIE textured wafers reveal lower average reflectance along from center to edges by 1% and referred the origin to the non-uniform surface structures with a depth of 2 times deeper and half-maximum width of 3 times. Samples with anti-reflection coating after forming emitter layer also revealed longer minority carrier lifetime by 40% for the edge compared to wafer center due to size effects. As results, mc-Si solar cells with RIE-textured surface also revealed higher efficiency by 2% and better external quantum efficiency by 15% for edge positions with higher height.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.4
• /
• pp.341-353
• /
• 2016

Purpose: The most important factor in longevity studies of dental prostheses is objective and consistent evaluation of the prosthesis. The Korean Academy of Prosthodontics suggested developing a standardized method for longevity studies of dental prostheses. The purpose of this study is to evaluate previously-used criteria and to develop new criteria, in the form of a procedure flowchart and an evaluation sheet. These new criteria may be able to provide a unified standard for future longevity studies of dental prostheses. Materials and methods: A literature review was performed about the evaluation of dental prostheses. Taking into account the strengths and weaknesses of previously used criteria, a novel, intuitive and objective method was developed for assessment of dental prostheses. Then, a pilot survey was performed with the newly developed flowchart and evaluation sheet to determine problems and implement possible improvements. Results: Thirty cases of fixed dental prosthesis (FDP), 25 cases of removable dental prosthesis (RDP), and 13 cases of implant supported prosthesis (ISP) were evaluated. The average life expectancy estimate was 12.82 years for FDP, 5.96 years for RDP, and 4.82 years for ISP with Kaplan-Meier survival analysis. Additionally, possible improvements discovered by the pilot survey were reflected in the flowchart and evaluation sheet. Conclusion: The newly developed KAP criteria, flowchart and evaluation sheet enabled objective and consistent results in trial longevity studies of dental prostheses. It is expected that future studies will not only use the KAP criteria but also further improvement will be made on them.

• Proceedings of the KSCN Conference
• /
• 2004.05a
• /
• pp.423.1-423
• /
• 2004

최근 보고에 의하면 국내에서 투석치료를 받고 있는 만성신부전 환자가 매년 증가 추세에 있다고 보고하였는데 그 원인으로는 신장 대체요법의 발전으로 인한 수명연장, 신장질환을 유발할 수 있는 타 질환으로부터의 생존율 증가에 따라 만성 신장질환의 발병률 증가를 주요 원인으로 지적하고 있다. 이처럼 투석 환자들의 수적인 증가뿐만 아니라 투석치료법의 발달에 따른 투석환자들의 수명도 연장되고 있어 투석환자의 재활에 대한 관심이 점차 증가하고 있다.(중략)

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.25-30
• /
• 2004

This paper gives an assessment criteria and average failure lifetime prediction for power supply of electrodeless fluorescent lamp. The paper present electric appliance safety standard and performance standard for power supply of electrodeless fluorescent lamp. also, It presents the Failure Rate or Mean Time To Failure(MTTF) for power supply of electrodeless fluorescent lamp. We suggest the assessment criteria and improve methods of the reliability on the design basis for the electrodeless fluorescent system.

• The Korean Journal of Applied Statistics
• /
• v.29 no.5
• /
• pp.823-833
• /
• 2016

The lifetime is a key characteristic of product quality. It is best to obtain the lifetime data of all samples, but they are often censored due to time or expense limitations. In this paper, we propose a binomial cumulative sum (CUSUM) chart to monitor the mean of type I right-censored Weibull lifetime data, for a xed value of the Weibull shape parameter. We compare the performance of the proposed binomial CUSUM chart with CUSUM charts studied previously using the steady-state average run length (ARL). The results show that the performance of the binomial CUSUM chart is better when the censoring rate is high and/or the sample size is small.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.04a
• /
• pp.70-79
• /
• 1993

세라믹은 금속에 비해서 밀도가 낮고, 내마멸성이 우수하고, 열팽창계수가 작고, 높은 온도범위에 걸쳐서 안정성과 경도를 유지함으로 기계구조용재료로서 유망시 되고 있다. 앞으로 세라믹부품에 대한 수요는 더욱 증가하리라고 예상하고 있으며, 세라믹의 응용이 시도되고 있는 부품은 더욱 다양화되어가고 있는 추세이다. 그러나, 세라믹재료에 관한 신뢰할만한 데이터베이스는 확립되지 못한 상태이고, 트라이보시스템에 관한 수명예측과 설계를 위한 기초 자료도 확립하지 못한 상태에 있다. 세라믹재료에 관한 수명예측과 설계를 위해서는 세라믹재료의 트라이보시스템(tribosystem)에서의 마멸기구의 규명과 마멸율을 평가할 수 있는 마멸식을 구하는 것이 가장 기본적인 과제라 할 수 잇다. 따라서 본 연구에서는 최신 기법에 의해서 제조된 HIP제 질화규소와 지르코니아를 실험재료로 하여 무윤활하에서의 미끄럼 마찰$\cdot$마멸실험을 수행하여 마찰$\cdot$마멸특성을 규명하고, SEM을 이용한 마멸면의 미시적 관찰을 통해서 세라믹의 마멸기구를 조사하여 세라믹마멸기구의 마멸모델을 제히하고자 한다. 제시된 마멸모델에 파괴역학을 도입하여 이론해석과 고찰을 수행하여 보다 실용적인 세라믹의 마멸율을 평가할 수 있는 새료운 무차원파라메타를 제안하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1265-1272
• /
• 2010

In view of the frequent start-ups and load changes in the recent past, there is a need for fossil-fuel power plants to be more efficient and reliable for long-term operation. Under high-temperature and high-pressure conditions, severe creep and fatigue damages can occur in major plant facilities, particularly, turbines and boilers. For highly stable operation and better maintenance, various techniques that facilitate a systematic assessment of the service life of critical facilities have been developed. However, to date, in Korea, to evaluate the remaining life of major facilities of fossil power plant, qualitative or semiquantitative analyses are carried out without following any standard guidelines or procedure. In this study, a standard code for assessing the remaining life of major plant facilities is proposed. This code takes into account creep and fatigue damage, which are generally accepted as dominant causes of damage to facilities. KEPIC (Korea Electric Power Industry code) is scheduled to include this guideline in 2010.