• Title/Summary/Keyword: 수명율

Search Result 603, Processing Time 0.03 seconds

A Life Evaluation Method for Efficient Maintenance of Water Mains (상수관로의 효율적 유지관리를 위한 수명 평가 방법)

  • Choi, Chang-Log;Park, Su-Wan;Kim, Jeong-Hyun;Bae, Cheol-Ho
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.271-275
    • /
    • 2009
  • 본 연구에서는 상수관로의 잔존수명을 통계적 기법 중 하나인 비례위험모형(PHM)에 적용하여 평가하였다. 비례위험모형을 구축하기 위한 개별관로의 생존시간은 관로의 파손율이 한계파손율에 도달하는 시간으로 정의하였다. 즉, Park and Loganathan(2002)에서 제시한 GPBM을 적용하여 시간에 따른 개별관로의 파손율을 추정하고 추정된 파손율과 한계파손율의 상등관계를 통해 생존시간을 산정하였다. 또한, 본 연구대상관로에 대한 GPBM을 구축함에 있어, 매설시점에서 누적파손횟수를 0으로 한 파손기록을 입력자료에 추가하는 방법과 가중계수(WF)의 범위를 수정함으로써 기존의 GPBM을 보완하였다. 이로써 파손사건이 최소 1회 이상 기록된 강관 및 주철관에 대한 비례위험모형을 구축하였다. 이와 같이 수정된 방법론은 관로 파손사건 등의 자료의 축적이 미비한 국내 여건에서 비례위험모형 및 GPBM과 같은 통계적 모형을 구축할 때 유용할 것으로 사료된다. 본 연구대상관로의 비례위험모형에 포함된 유의한 공변수는 관종과 관경 그리고 길이이며 관종은 비례성 가정을 위배하여 시간종속형 변수로 모형화되었다. 최종 채택된 PHM모형을 통해 생존함수를 추정하였으며 추정된 생존함수를 이용하여 개별관로의 잔존수명 및 경제적 수명 그리고 각 수명에 대한 95% 신뢰구간을 산정하였다. 또한 개별관로의 경제적 수명에 영향을 미치는 공변수의 위험비율도 분석하였다. 분석결과 강관의 평균 경제적 수명은 약 25.1년이고 주철관은 약 21년으로 산정되었다. 또한 관종에 따른 경제적 수명에 도달할 상대적인 위험률은 전반적으로 주철관이 높으나 20년 이상 매설된 관로에서는 강관의 위험률이 높을 것으로 분석되었다. 관경과 길이는 크기에 비례하여 상대적 위험률도 증가하였다.

  • PDF

장려상 이태연, 주윤미, 김남성_ 강원대-Structure solution of remodeling

  • Korean Structural Engineers Association
    • 건축구조
    • /
    • v.12 no.4
    • /
    • pp.82-83
    • /
    • 2005
  • 현재까지의 아파트 재건축은 대부분의 기존에 낮은 용적율의 저층 아파트를 용적율을 높여 고층으로 건설하는 식으로 이루어졌다. 이때 증가하는 아파트 가구수는 일반에 분양함으로서 재건축 조합원인 원래의 아파트 주민과 시공사에게 경제성을 확보하여 주고, 따라서 그들간의 이해관계의 일치에 의해 재건축이 쉽게 이루어질 수 있었다. 그러나 콘크리트 건물의 수명이 짧다는 일본의 경우도 그 수명이 37년이며 일반적으로 외국의 경우 콘크리트 건물의 수명이 50-60년은 된다는 점을 볼 때 20년만 넘으면 재건축을 요구하는 우리나라의 아파트의 수명은 선진국에 비하여 지나치게 짧다. 재건축이 주민과 시공사의 이해관계에 의한 불가피한 상황이라면 재건축보다는 기존의 건물을 해체하진 않으면서 그들의 욕구를 충족시킬 수 있는 방안이 필요하다.

  • PDF

Au wire와 Ag pad간 확산현상의 가속수명시험

  • Kim, Cheol-Hui;Hwang, Sun-Mi;Song, Byeong-Seok
    • Proceedings of the Korean Reliability Society Conference
    • /
    • 2011.06a
    • /
    • pp.49-54
    • /
    • 2011
  • 반도체 칩과 패키지는 wire로 연결되는데, 이 때 반도체의 용도에 따라 다양한 wire와 pad의 조합이 사용되며, 이 두 개의 다른 금속물질 결합부위는 IMC(Inter Metallic Compound)를 형성하게 된다. 그러나, 결함 및 오염 등에 의하여 인접재료의 원자들이 이동하는 확산(Diffusion)이 발생하게 되어 IMC가 성장하고, 두 개의 금속물질간의 확산율은 상호 다르며, 확산율은 온도에 따른 함수가 된다. Au wire와 Ag pad를 이용하여 제조한 IR 수신모듈를 대상으로 3가지 고온조건에서 가속수명시험을 실시하였고, 각 온도별 수명분포를 바탕으로 가속계수와 활성화에너지 도출 및 정상온도에서의 수명도 예측할 수 있었다.

  • PDF

Load capacity simulation of PTO gears for a small cultivator during rotary ditching operation (구굴 작업에 따른 소형 관리기의 PTO 기어 부하 용량 시뮬레이션)

  • Lee, Pa-Ul;Choi, Changhyun;Choi, Youngsoo;Lee, Lijung;Kim, Yongjoo
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2017.04a
    • /
    • pp.11-11
    • /
    • 2017
  • 지속적인 고령화 추세에 따라 여성과 고령층의 노동력이 차지하는 비율이 높아지고 있어, 사용하기 편리한 소형농기계의 요구가 증가하고 있는 실정이다. 본 연구에서 사용한 소형 관리기는 정식 작업 전 경운, 정지 등 다양한 작업이 가능한 농기계이다. 본 연구에서는 소형 관리기에 토크 측정 시스템을 구성하였으며, 작업 중 가장 큰 부하를 받는 구굴 작업 부하를 측정하였다. 또한, 작업 시 가장 직접적으로 영향을 받는 PTO (Power Take Off) 기어의 부하 용량(load capacity)을 기어 해석 소프트웨어를 이용하여 분석하였다. PTO 기어의 부하 용량은 안전율, 피로수명을 대상으로 평가하였다. 측정된 부하 데이터는 변동 하중이므로, 부하 크기와 빈도수의 규칙적인 신호로 단순화하기 위하여 레인플로우 카운팅 방법을 사용하였으며, SWT (Smith-Watson-Topper) 방법을 이용하여 공칭 토크를 계산하였다. PTO 기어의 안전율은 ISO 6336, 피로 수명은 마이너 법칙(Miner rule)을 이용하여 계산하였다. PTO의 변속 단수 총 2단이며, 5개의 스퍼 기어로 구성되어 있다. 시뮬레이션 결과, 소형 관리기의 주행 속도 또는 PTO의 회전속도 증가에 따라 PTO에서 발생하는 평균 부하가 크게 나타났다. 또한 주행 단수 및 PTO 기어 단수가 증가할수록 기어의 안전율과 피로 수명이 감소하였으며, 특히 PTO 기어의 안전율은 접촉 응력에서의 안전율보다 굽힘 응력에서의 안전율이 급격하게 감소하였다. 소형 관리기의 PTO 수명은 주행 단수 2단, PTO 단수 2단 일 때 가장 적게 나타났다. 따라서 소형 관리기의 주행 속도와 PTO 회전 속도를 저속으로 작업하는 것이 PTO 기어의 수명에 더 유리할 것으로 판단된다.

  • PDF

Customer Lifetime Value Model Using Segment-Based Survival Analysis (고객 세분화에 기반한 생존분석을 활용한 고객수명 예측 모델)

  • Chun, Heui-Ju
    • Communications for Statistical Applications and Methods
    • /
    • v.18 no.6
    • /
    • pp.687-696
    • /
    • 2011
  • Customer Lifetime or Customer Lifetime Value is a essential metric of differentiated CRM marketing and differentiated marketing strategy as a company core competency. However, customer lifetime used in companies is easily obtained from a confined simple customer attrition rate at some specific time point regardless of customer characteristics. In this study, in order to overcome the constraints of previous simple methods and to make practical use of it in industries, we suggest a method that estimates a customer lifetime using a customer segment based survival analysis with the censored data of customers; in addition, we apply this method to A mobile telecom company data. A method using customer segment based survival analysis is suggested in this study 1) includes all customers having different subscription dates, 2) reduces individual error, 3) can reflect trends after the observed time point and is more realistic.

Nondestructive Characterization for Remanent Life of Advanced Ferritic Steel by Reversible Permeability (가역투자율에 의한 첨단 페라이트강의 잔여수명에 대한 비파괴평가)

  • Hong, Seung-Pyo;Ryu, Kwon-Sang;Kim, Chung-Seok
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.33 no.2
    • /
    • pp.181-186
    • /
    • 2013
  • We present nondestructive characterization for remanent life of advanced ferritic steels, next-gen energy facility materials by reversible permeability. The reversible permeability is based on the theory that the value of reversible permeability is the same differential of the hysteresis loop. The measurement principle is based on the foundation of harmonics voltage induced in a sensing coil using a lock-in amplifier tuned to the frequency of the exciting one. The peak interval of reversible permeability(PIRP), Vickers hardness, and tensile strength(TS) of the aged samples decreased with aging time. We could estimate the remanent life of advanced ferritic steel by using the relationship between the peak interval of reversible permeability and Larson-Miller parameter(LMP), non-destructively.

Application of Stepped Isothermal Methods to Lifetime Prediction of Geogrids (SIM을 적용한 성토보강용 지오그리드의 수명예측)

  • Koo, Hyun-Jin;Kim, You-Kyum;Kim, Dong-Whan
    • Journal of the Korean Geosynthetics Society
    • /
    • v.4 no.1
    • /
    • pp.3-6
    • /
    • 2005
  • The failure of geogrids can be defined as an excessive creep strain which causes the collapse of slopes and embankments. In this study, the lifetime of knitted polyester geogrids was predicted by using SIM(Stepped Isothermal Methods using TTS principal) and statistical data analysis techniques. The results indicate that the creep strain was 8.74, 8.79, 8.80% with 2.16~2.20% of CV% at 75, 100, 114 years, respectively and the creep strain reaches 9.3% after 100 years of usage at $27^{\circ}C$ which meets the required lifetime(creep strain less than 10% after 100 years of usage) in the fields. The SIM method is shown to be effective in reduction of uncertainty associated with inherent variability of multi-specimen tests and shorter test times than conventional TTS(Time-Temperature Superposition).

  • PDF

Derivation of Optimum GGBFS Replacement with Durability Design Parameters (내구성 설계 변수에 따른 최적 고로슬래그 미분말의 치환율 도출)

  • Jang, Seung-Yup;Yoon, Yong-Sik;Kwon, Seung-Jun
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.6 no.1
    • /
    • pp.36-42
    • /
    • 2018
  • GGBFS(Ground Granulated Blast Furnace Slag)-replacement is very effective for improving resistance to chloride attack and this can induce a long service life for RC(Reinforced Concrete) structures exposed to chlorides. In the work, the design parameters such as cover depth, surface chloride content, critical chloride content, and replacement ratio of GGBFS are considered, and optimum replacement ratio of GGBFS are derived with intended service life. The changes of surface chloride content and cover depth show 3.16~3.38 and 3.02~3.34 times of service life variation, which are most influencing parameters. Critical chloride content shows 1.53~1.57 times of service life variation regardless of w/b(Water to Binder) ratios. In the case of surface chloride content $18.0kg/m^3$, the most severe condition, cover depth over 70 mm and GGBFS replacement ratio over 42% are required with concrete containing w/b ratio under 0.42 for 100 years of intended service life. The condition of $13.0kg/m^3$, GGBFS replacement over 35% is required. For reasonable durability design, quantitative exterior condition and critical chloride content should be determined, and the criteria in Domestic Specification is evaluated to be conservative.

Effects of 1-Methylcyclopropene and Benzyladenine on Flowering and Vase Life in Cut Iris (아이리스 개화율 및 절화수명에 미치는 1-methylcyclopropene과 benzyladenine의 영향)

  • Nam, Jin Soo;Park, In Sook;Shim, Sung Im;Ryu, Jung A;Lim, Ki Byung
    • FLOWER RESEARCH JOURNAL
    • /
    • v.18 no.2
    • /
    • pp.87-92
    • /
    • 2010
  • This research was aimed to extend the vase life, improve the cut flower quality and promote flowering rate of bulbous cut Iris 'Blue Magic'. Three different concentrations of 1-MCP ranging from 250 to $750nL{\cdot}L^{-1}$ were treated on cut Iris flowers for the vase life elongation. Several effects of 1-MCP treatment has shown such as early flowering as one day but vase life showed no significant differences comparing to the untreated control. Flowering rate was 75% or more in the treated ones as compare to 64.2% in untreated control. Especially, in a treatment with $250nL{\cdot}L^{-1}$ 1-MCP for 12 hours it showed all flowering. In many post-harvest experiments of cut flowers, ethylene production from flower organ has considered as most critical factor on vase life. Ethylene production from flower organ was measured by gas chromatography (GC) and it showed that there is no direct relation between flower longevity and emission of the ethylene gas in cut Iris. In comparison with the untreated control, ethylene generation rather seems to be increased as 1-MCP treatment increased. There was a synergy effect when 1-MCP and BA applied simultaneously in which flowering and vase life were fastened and also extended, respectively. Therefore, treatment of 1-MCP for cut Iris at flower early harvest is able to improve the flower quality both by diminishing non-flowering rate and by extended flower longevity.

Relationships among Viviporous Germination, Dry-heat Tolerance and Seed Longevity in Milyang 23/Gihobyeo RILs (벼 밀양 23호$\times$기호벼의 재조합 자식계통에서 수발아성,건열 저항성 및 종자수명간 상관관계)

  • Lee, Seung-Yeob;Ahn, Jeong-Ho;Kim, Hyo-Jin;Bae, Jong-Hyang;Eun, Moo-Young
    • Journal of Bio-Environment Control
    • /
    • v.15 no.4
    • /
    • pp.421-427
    • /
    • 2006
  • To investigate the relationships among the traits related seed dormancy in rice, viviparous germination, dry-heat tolerance and seed longevity were tested using 164 M/G RILs ($F_{17}$) derived from the cross between Milyang 23 (Indica/Japonica) and Gihobyeo (Japonica). At 40 days after heading, the viviparous germination rates of Milyang 23 and Gihobyeo were 0.0 and 7.0%, respectively. The averaged viviparous germination rate of 164 MIG RILs was 3.2%, and their range was from 0.0 to 50.9%. In dry-heat treatment at $90^{\circ}C$ for 24 h followed by the pre-drying at $40^{\circ}C$ for 2 days, Milyang 23 showed higher germinability (98.6%,2.7 days to $T_{50}$) than Gihobyeo (37.6%, 12.9 days to $T_{50}$), and the mean germination rate of 164 M/G RILs was 72.4%. In 54 months after harvest, the germinability in Milyang 23 and Gihobyeo were 90% and 0%, and 71 lines among 164 M/G RILs showed the germinability over 90%. The relationship between seed longevity and dry-heat tolerance was linearly correlated with high positive correlation coefficient. The relationships between seed longevity and viviparous germination, and viviparous germination and dry-heat tolerance were linearly correlated with high negative correlation coefficient. Milyang 23 had higher tolerance against high dry-heat, viviparous germination and long-term storage than Gihobyeo, and 164 M/G RILs showed the medium values of parents.