• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.17-26
• /
• 2002

The purpose of this study was to investigate the important Parameters of the Pedicle screw by estimating the mechanical characteristics of screws under static and dynamic loads. Methodology for estimating Parameters under static load was proposed. It was also shown that the fatigue life of the one-level system could be increased by changing the shape of screws. Load parameters of the single pedicle screw were friction force. bending moment. and holding force. The test results of the one-level system could be inferred from teat results of the sin91e screw under bending force Fatigue life of the one-level system with flexible rod was longer than that of the upper Part test without rod . Considering the drop of flexibility of the rod due to muscles and ligament, fatigue life of the one-level system could be estimated b? that of the single screw.

• International Journal of Highway Engineering
• /
• v.5 no.3 s.17
• /
• pp.11-20
• /
• 2003

Concrete structures such as bridges, pavement, and offshore structures are normally subjected to repeated load. Because highway and airfield pavements are to resist tension in bending, fatigue failure behavior is very important the fatigue life of materials. Therefore, in this paper was carried according to the fatigue test method and experiment variables for pavement concrete. The fatigue tests were applied split tension($150{\times}75$ in size) and flexural($150mm{\times}150mm{\times}550mm$ in size) beam fatigue test method. Major experimental variable in the fatigue tests in order to consideration of fatigue life were conducted loading frequency of 1, 5, 10, 20Hz and loading shape of block, sine, triangle and moisture condition of dry and wet condition and curing age of 28day and 56day. The test results show that the effect of loading frequency increasing the frequency increased fatigue life, decreased significant at frequencies below 200 cycles. The effect of loading wave form on fatigue life show that a block decreased, triangular increased in comparison with sine. The effect of moisture condition decreased in wet condition in comparison with dry condition. The effect of curing age increased in 564ays in comparison with 28day.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.124-124
• /
• 2012

부식 현상은 산업과 실생활에서 경제적, 인간의 생활과 안전에서 손실을 일으키는 요인이다. 자동차 부품, 선박 부품 및 전자 부품 산업 등 다양한 분야에서 수명 및 고장율 시험에 대한 관심이 증가하고 있다. 넓은 분야에서 염수분무시험을 적용하고 있지만, 실제 야외환경에서 발생하는 부식과의 상관관계가 확실하게 규명되어 있지 않다. 그리고 이렇게 넓은 산업전반에서 적용하고 있는 염수분부시험 방법은 시료의 부식 저항성을 판단하기 위한 시험시간이 오래 걸리고 이런 이유로 적정한 시험시간을 설정하기 어려울 뿐만 아니라 고내식성 시료의 부식평가가 어렵다는 단점을 가지고 있다. 본 연구에서는 부식의 형태에서 균일부식 현상을 이용하여 옥외 노출 부식시험과 염수분무시험, 가속부식시험 환경에 노출된 시료의 무게 감량을 측정하여 가속계수 도출과 함께 부식 정도를 예측할 수 있는 방법을 연구하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.75-84
• /
• 2021

In this study, to evaluate deterioration propagation life and deterioration curve of the shop painted and field re-painted steel bridges, accelerated corrosion tests were carried out on 4 types of heavy-duty painting systems with different surface treatments. The surface treatments prior to painting were examined by hand tool(SSPC SP-2), power tool(SP-3,) or blast cleaning(SP-10) considering shop painting and field re-painting. The paint deterioration curves for each painting system and surface treatment were evaluated based on corrosion propagation from the initial paint defects. From the test results, the paint deterioration life of shop painted and field re-painted system was evaluated and compared by using corrosivity categories and durability performance evaluation of structural steel. The deterioration propagation life of shop and field paint was estimated in 18 to 21 years and 5.3 to 8.0 years with atmospheric corrosion category C4.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.312-324
• /
• 2008

To improve the newly designed HKS(hinge kit system) in common refrigerators, it was investigated the new robust methodologies. There were the study of failure modes, mechanisms in the marketplace, and the design parameters of HKS with various improvements using accelerated life testing. Based on the claimed marketplace product returns and 1st ALT reproduction, the fracturing and cracking occur in the housing of the HKS. The missing design parameters of the failed HKS in the design phase of the refrigerator was the housing hinge kit structure. The corrective action plans are the modifications of the housing hinge kit structure from the open supporting to all supporting structure. Based on 2nd ALTs, the fracturing and cracking occur in the torsion shaft. The missing design parameter was the roundness of torsion shaft. After a sequence of ALT testing, the levels of the missing design parameters were setup. The yearly failure rate and B1 life of the redesigned HKS, based on the results of ALT, were over 0.01 percent and 10 years, respectively. The parameter design through the inspection of the failed product, load analysis, and three rounds of ALT, was very effective in the new robust design methodologies of the mechanical system and this method can be applied to other design system.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.209-216
• /
• 2007

Fatigue life prediction methodology of the rubber component made of vulcanized natural rubber under variable amplitude loadings was studied. The displacement-controlled fatigue tests were conducted at different levels and the maximum Green-Lagrange strain was selected as damage parameters. A fatigue life curve of the rubber represented by the maximum Green-Lagrange strain was determined from the nonlinear finite element analysis. The transmission load history of SAE as variable amplitude loading was used to perform the fatigue life prediction. And then a signal processing of variable loading by racetrack and simplified rainflow cycle counting methods were performed. The modified miner's rule as cumulative damage summation was used. Finally, when the gate value is 30%, the predicted fatigue life of the rubber component agreed well with the experimental fatigue lives with a factor of two.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.291-300
• /
• 2020

The cartridges used for illuminating a desired point or area are virtually limited in tests and evaluations because of limitations, such as noise during launch, the possibility of fires caused by illuminant charge, and the annual testable quantity. Therefore, to solve these problems, a ground fixed test, which replaces the firing test, or an evaluation method to perform limited tests, can be applied more efficiently. In this paper, the results of an 81mm illuminating cartridge, KM series performed in 2019 were analyzed comprehensively to identify the trends in reliability and quality characteristics and to estimate the shelf life. The shelf life was estimated to be at least 10 years based on the time when the lower confidence level reached 80% at a confidence level of 90%. Considering only major defects, the shelf life can be estimated to be approximately 23 years. On the other hand, the shelf life was estimated to be approximately 11 to 15 years and 25 to 28 years according to the effective illuminating time. Finally, an assessment plan of illuminating cartridges for the mortars was also presented as an improvement plan for an assessment method in the future.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.234-243
• /
• 1992

Fatigue crack initiation life has a wide scatter and this makes the fatigue design of structural members difficult. In order to make the fatigue life distribution clear, it is required to prepare a large number of specimens and repeat the fatigue tests under the same loading condition. Such fatigue tests usually take much time and cost. In this study, a fatigue testing method using a multi-notched test specimen for the purpose of estimating the distribution function of fatigue crack initiation life by small number of fatigue tests is used. The purpose of this study is to verify the above fatigue testing method of a multi-notched specimen by using Bayesian reliability analysis, Least square method and Skewness method for the determination of unknown Weibull parameters. The multi-notched specimen is a specimen in which several tens of statistically identical notches are prepared.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.667-673
• /
• 1995

원자력 발전소의 안전성과 향후 수명연장에 있어 중요한 파괴인성 평가기준으로 사용되는 연성-취성 천이온도인 RT$_{NDT}$ 의 중요성과 값 결정에 있어서의 문제점을 살펴보고, 천이온도 영역에서 파괴인성의 통계적 분포를 이용한 RT$_{NDT}$ 예측과 충격시험결과로부터 K곡선을 유도하는 방법에 대한 가능성 등을 논의하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.25-30
• /
• 2004

This paper gives an assessment criteria and average failure lifetime prediction for power supply of electrodeless fluorescent lamp. The paper present electric appliance safety standard and performance standard for power supply of electrodeless fluorescent lamp. also, It presents the Failure Rate or Mean Time To Failure(MTTF) for power supply of electrodeless fluorescent lamp. We suggest the assessment criteria and improve methods of the reliability on the design basis for the electrodeless fluorescent system.