• Korean journal of applied entomology
• /
• v.36 no.1
• /
• pp.111-117
• /
• 1997

Occurrence status of Tetranychus viennensis Zacher was investigated in Kyonghuk province. Its ecological studies were carried out and chemical control efficacy against females and eggs was examined. And the results ohtained are as follows. T. viennensis occurred from mid April through mid November with the peak time in June on cherry tree. Population level of T. viennensis was varied from 0 to 160 individuals per 100 peach leaves in different peach orchards, and its occurrence rate was 35% out of 20 ochards. However no T. viennensis was observed from 25 apple orchards in 5 districts of Kyongbuk province. Overwintering stage of T. viennensis females appeared in mid October, and most of them moved into under the rough hark in early November. The overwintered adult females moved out from the rough bark to leaves in early April. Mortality during overwintering was about 55%. Under four constant temperatures of 16, 19, 22, 25$^{\circ}$C. egg periods were 14. 3, 9.2, 6.8, and 4.0 days ; larva -nymph periods were 20.2, 13.9, 8.7, and 6.6 days. Female longevity was 67. 7, 60.7, 46.4, and 34.0 days : mean tota: fecundities per female were 21.2, 44.3, 54.4, and 64.7 eggs. Some acaricides, azocyclotin, pyridaben, propargite, tehufenpyrad and fenpyroximate were highly effective against females, while hexythiazox and clofentezine showed very low control effect from 3.6 to 14.4%. Whereas, all of 7 acaricides tested highly effective against the eggs.

• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1428-1436
• /
• 2016

A multipath routing in wireless sensor networks (WSNs) provides advantage such as reliability improvement and load balancing by transmitting data through divided paths. For these reasons, existing multipath routing protocols divide path appropriately or create independent paths efficiently. However, when the sink node moves to avoid hotspot problem or satisfy the requirement of the applications, the existing protocols have to reconstruct multipath or exploit foot-print chaining mechanism. As a result, the existing protocols will shorten the lifetime of a network due to excessive energy consumption, and lose the advantage of multipath routing due to the merging of paths. To solve this problem, we propose a multipath creation and maintenance scheme to support the mobile sink node. The proposed protocol can be used to construct local grid structure with restricted area and exploit grid structure for constructing the multipath. The grid structure can also be extended depending on the movement of the sink node. In addition, the multipath can be partially reconstructed to prevent merging paths. Simulation results show that the proposed protocol is superior to the existing protocols in terms of energy efficiency and packet delivery ratio.

• Journal of Technology Innovation
• /
• v.26 no.2
• /
• pp.37-68
• /
• 2018

This study examines the effects of entrepreneurial orientation and external oriented organizational culture on the firm perfornamance focusing on mediating effects of open innovation. The survey was conducted on Korean manufacturing firms with 100-5,000 employees among listed companies and external auditing companies. The validity of the research model and hypotheses was verified through analysis of structural equation model for 283 valid responses. Empirical results show that entrepreneurial orientation positively affects both open innovation and firm's performance. The external oriented organizational culture of firms appears to be positive effects on open innovation, but the effect between the external oriented organizational culture and firm's performance shows no statistical significance. Open innovation have positive effects on firm performance. In addition, a test for mediation effects of open innovation reveals that a full mediation exists between the external oriented organizational culture and firm's performance, while there is a partial mediation effect between entrepreneurial orientation and firm's performance. This study contribute to the literature by deepening understanding on the open innovation. We propose an integrated model for examining antecedent factors, open innovation and performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.5
• /
• pp.1123-1129
• /
• 2015

Macro(automatic hunting) of mobile game is a program that touch the screen by defined rules like a game bot in PC online games, and it is used by make various ways like android application or windows application program. This gives honest users deprivation and make to lose their interest. Finally they would leave the game and gradually game life would be shorten. Although many studies to prevent these problems in PC online game are conducted, applying mobile game to PC's way is difficult because mobile games are limited to use the network and device performance is different with PC. In this paper, we propose a framework for macro detection by using the touch event information. A touch event on the mobile game is a necessary control command to the game. Because macro touches the screen with the same pattern, there is a difference between normal user's behavior and macro's operation. In mobile games that casual games are mostly, Touch event is the best difference that identify normal user against macro for a short period of time. As a result of detecting macros used in real mobile game by using the proposed framework it showed 100% accuracy and 0% false positive rate.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.3
• /
• pp.231-235
• /
• 1996

The experiment was conducted to determine pollen morphology of Chinese peony and its germination. The results were obtained as following ; Pollen shpae was usually large ellipse and the pol­len germination rate of Eui-seong Peony line was 71% which was lower than that of other Peony lines. In a bud, the pollen began to be observed on $7{\sim}9days$ before flowering and as getting on for flowering time, normal pollen and germination rates were higher. The pollen germination and elongation beganat 30 minutes after incubation on artificial medium and were completed after $2{\sim}3\;hours$. As the storage time went on, the pollen life span was shortened. The germination rate was 51% at 8 days-storage of room temperature. The germination rate was 48% ad 43% at 95 day-storage in $0^{\circ}C$ and $-15^{\circ}C$, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.15-24
• /
• 2009

Korea is known to have seasonal frost during winter and the effect of low temperatures and water may cause a weakening of pavements. For that reason, frost protection layers have been constructed in pavements to avoid damage caused by frost action. The practies established in USA and Japan have been adopted as anti-frost design methods in Korea. However, the characteristics of Korean soils are different. Additionally, there is no formulation of a reasonable equation for frost penetration depth and the criterion to identify potentially frost-susceptible soils in present pavement design manuals in Korea. Therefore, adequate pavement design procedures in seasonal frost areas, as well as construction and maintenance practices are required. In this paper, frost penetration depths along national roads in Korea were measured and analyzed over several years. The frost penetration depth was analyzed with respect to the provinces of Korea and sunny/ shaded areas. Additionally, measurement results were compared to the formula of the US Army Corps of Engineers and Ifukube in Japan.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.300-309
• /
• 2017

A spacecraft obtains a reaction momentum required for an orbit correction and an attitude control by exhausting a combustion gas through a small thruster in space. If the exhaust plume collides with spacecraft surfaces, it is very important to predict the exhaust plume behavior of the thruster when designing a satellite, because a generated disturbance force/torque, a heat load and a surface contamination can yield a life shortening and a reduction of the spacecraft function. The purpose of the present study is to ensure the core technology required for the spacecraft design by analyzing numerically the exhaust gas behavior of the 10 N class bipropellant thruster for an attitude control of the spacecraft. To do this, calculation results of chemical equilibrium reaction between a MMH for fuel and a NTO for oxidizer, and continuum region of the nozzle inside are implemented as inlet conditions of the DSMC method for the exhaust plume analysis. From these results, it is possible to predict a nonequilibrium expansion such as a species separation and a backflow in the vicinity of the bipropellant thruster nozzle.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.85-90
• /
• 2006

The purpose of this research is to design an imitation boiler similar to the waste heat boiler installed on a plasma melting furnace in order to acquire a capability of a thermal design as to the circulation of heat and the discharge of noxious gas inside a boiler and to improve the efficiency of a waste heat boiler using the CFD (Computation Fluid Dynamics) program. The position of corrosion and the generation of a clinker inside a boiler due to temperature changes, combustion gas flows, and corrosive gases inside a boiler are examined to design the structure of an efficient boiler and recycle energy. As a result of this research, the boiler installed on a plasma melting furnace met the conditions of design by cooling the combustion gases discharged after the second combustion from an exhaust port, originally at 1,200 degrees Celsius, down to around 450 degrees Celsius. On the other hand, the circulation of corrosive gases (SOx and HCL) may lead to the generation of corrosion or a clinker in the upper and lower parts of an exhaust port more easily than any other parts of a boiler. Accordingly, the corrosion on the inside and outside walls of a boiler may result in a shortened lifespan of a boiler and an inability to recycle waste heat in an efficient manner. A prevention against corrosion at high and low temperatures needs to be considered in detail.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.3
• /
• pp.576-606
• /
• 2017

It is more salient in the high-tech industry to cooperate even among competitors in order to promptly respond to the changes in product architecture. In this sense, 'co-opetition,' which is the combination word between 'cooperation' and 'competition,' is the new business term in the strategic management and represents the two concepts "simultaneously co-exist." From this view, this study set up the research purposes as follows: 1) investigating the corporate managerial and technological behavioral characteristics in the co-opetition of the global display industry. 2) verifying the emerging factors during the co-opetition behavior hereafter. 3) suggesting the strategic direction focusing on the co-opetition behavioral characteristics. To this end, this study used co-word network analysis to understand the structure in context level of the co-opetition. In order to understand topics on each network, we clustered the keywords by community detection algorithm based on modularity and labeled the cluster name. The results show that there were increasing patterns of competition rather than cooperation. Especially, the litigations for mutual control against Korean firms much more severely occurred and increased as time passed by. Investigating these network structure in technological evolution perspective, there were already active cooperation and competition among firms in the early 2000s surrounding the issues of OLED-related technology developments. From the middle of the 2000s, firm behaviors have focused on the acceleration of the existing technologies and the development of futuristic display. In other words, there has been competition to take leadership of the innovation in the level of final products such as the TV and smartphone by applying the display panel products. This study will provide not only better understanding on the context of the display industry, but also the analytical framework for the direction of the predictable innovation through analyzing the managerial and technological factors. Also, the methods can support CTOs and practitioners in the technology planning who should consider those factors in the process of decision making related to the strategic technology management and product development.

• Journal of KIISE:Information Networking
• /
• v.37 no.3
• /
• pp.204-216
• /
• 2010

Since Sensor nodes around a fixed sink have huge concentrated network traffic, the battery consumption of them is increased extremely. Therefore the lifetime of sensor networks is limited because of huge battery consumption. To address this problem, a mobile sink has been studied for load distribution among sensor nodes. Since a mobile sink changes its location in sensor networks continuously, the mobile sink has time limits to communicate with each sensor node and unstable signal strength from each sensor node. Therefore, a fair and stable data collection method between a mobile sink and sensor nodes is necessary in this environment. When some sensor nodes are not able to send data to the mobile sink, a real-time application in sensor networks cannot be provided. In this paper, the new scheduling method, FQMS (Fair Queuing for Mobile Sink), is proposed for fair and stable data collection for mobile sinks in sensor networks. The FQMS guarantees balanced data collecting between sensor nodes for a mobile sink. In out experiments, the FQMS receives more packets from sensor nodes than legacy scheduling methods and provides fair data collection, because moving speed of a mobile sink, distance between a mobile sink and sensor nodes and the number of sensor nodes are considered.