• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.3
• /
• pp.49-56
• /
• 2023

The allowable mean overtopping discharge is used as a design parameter for coastal structures. The crest elevation of coastal structures should ensure the wave overtopping discharge within acceptable limits for structural safety and the safety of pedestrians, vehicles, operations, and so on. In this study, two-dimensional physical model tests on typical rubble-mound structure geometries were performed and the the mean wave overtopping discharges under various water depth and wave conditions were measrued. The various test conditions were applied to the tests with the change of the wave steepness, relative freeboard and relative wave height. An empirical formula from the experimental data was proposed to predict the mean wave overtopping volumes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1B
• /
• pp.89-98
• /
• 2006

In this study, a method for flood runoff analysis in main channel connected with interior floodplain, is applied for evaluation of hydraulics of Sapgyo lake for the purpose of flood protection by considering tidal effect of West Sea and runoff from the watershed. Especially, operational condition of sluice gate was explicitly modeled in conjunction with various runoff scenarios from watershed. The change in hydraulics of main channel and interior floodplain was found to be predominantly affected by tidal effect, and explicit modeling of gate operation made possible the evaluation of hydraulic characteristics of different alternatives. Until now, such an analysis was not made due to the lack of models with such capability, however, with the proposed method, it is possible to perform such an analysis and is thought that the proposed method can be a valuable tool for flood protection planning.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1711-1715
• /
• 2006

최근 급격한 도시화는 홍수량 증가 및 갈수 시 하천의 건천화 등 유역의 유출특성 변화를 가져왔다. 본 연구에서는 이러한 문제를 해결하는 방안 중 하나인 투수성 포장의 유역 내 수문학적 효과를 분석하였다. 이를 위해 투수성 포장을 이용한 수리모형 실험 및 수치모형(SWMM)을 병행하여 수행하였다. 연구에 사용한 수치모형은 기존 도시유출 모형인 SWMM(Storm Water Management Model) 모형에 투수성 포장의 수문학적 효과를 고려할 수 있도록 수정된 모형이며, 수리모형 실험 결과를 토대로 수치모형의 중요 매개변수를 추정하였다. 또한 실험에 의해 관측된 지표 및 지하수 유출량과 수치모형에 의해 산출된 자료를 비교.분석하여 수정된 SWMM 모형의 유용성을 평가하였다. 강우강도가 65 mm/hr, 90 mm/hr, 95 mm/hr인 강우를 4시간씩 공급하는 경우에 대한 3가지 수리모형 실험을 수행하였다. 수리모형실험 결과 강우강도는 지표면 유출의 크기에 직접적인 영향을 미치고 있었으며 지하수 유출량은 강우강도 보다는 지하수위 조건에 더 큰 영향을 받는 것으로 분석되었다. 수리모형 실험결과 및 수치모형 모의결과를 비교 분석한 결과, 토양 함수량 및 지하수위 변동 특성은 초기에서 정상상태로 전이되는 부분과 강우 정지 후 감소되는 부분에서 수리모형 실험과 다른 양상을 보였다. 지하수위는 실험 시 발생하는 공기층의 포집이 많은 영향을 미치고 있음을 알 수 있었고, 함수량 변화에 있어서는 수치모형(SWMM)의 모의 결과가 과도하게 감소하는 특성을 보여 주고 있었다. 즉, 유출량의 특성은 비슷한 양상을 보이고 있으나 지하수위 변화 및 토양 내 함수량 변화 예측에 있어서는 그 정확도가 떨어지는 것으로 평가되었다. 그러나 본 연구결과를 통하여 투수성 포장과 지하수에 관련된 매개변수의 집적과 분석결과는 현장기술 적용 시 매개변수의 유용한 선택과 도시유역의 물 순환 건전화 대안기술 적용에 효과적인 방법론을 제시할 수 있을 것으로 사료된다.

• Tunnel and Underground Space
• /
• v.21 no.2
• /
• pp.117-127
• /
• 2011

The purpose of this study is to demonstrate the effect of in-situ rock stresses on the deformability and permeability of fractured rocks. Geological data were taken from the site investigation at Forsmark, Sweden, conducted by Swedish Nuclear Fuel and Waste Man-agement Company (SKB). A set of numerical experiments was conducted to determine the equivalent mechanical properties (essentially, elastic moduli and Poisson's ratio) and permeability, using a Discrete Fracture Network-Discrete Element Method (DFN-DEM) approach. The results show that both mechanical properties and permeability are highly dependent on stress because of the hyperbolic nature of the stiffness of fractures, different closure behavior of fractures, and change of fluid pathways caused by deformation. This study shows that proper characterization and consideration of in-situ stress are important not only for boundary conditions of a selected site but also for the understanding of the mechanical and hydraulic behavior of fractured rocks.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.105-115
• /
• 2000

As large underground projects such as radioactive waste disposal, hot water and heat storage, and geothermal energy become influential, the study, which consider all aspects of thermics, hydraulics and mechanics would be needed. Thermo Hydro-Mechanical coupling analysis is one of the most complex numerical technique because it should be implemented with the combined three governing equations to analyze the behavior of rock mass. In this study, finite element code, which is based on Biot's consolidation theory, was developed to analyze the thermo-hydro-mechanical coupling in continuum rock mass. To verify the implemented program, one-dimensional consolidation model under the isothermal and non-isothermal conditions was analyzed and was compared with the analytic solution. The parametric study on two-dimensional consolidation was also performed and the effects of several factors such as poisson's ratio and hydraulic anisotropy on rock mass behavior were investigated. In the future, this program would be revised to be used for analysis of general discontinuous media with incorporating discrete joint model.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.355-365
• /
• 2000

As large underground projects such as radioactive waste disposal, hot water and heat storage, and geothermal energy become influential, the study, which consider all aspects of thermics, hydraulics and mechanics would be needed. Thermo-Hydro-Mechanical coupling analysis is one of the most complex numerical technique because it should be implemented with the combined three governing equations to analyze the behavior of rock mass. In this study, finite element code, which is based on Biot's consolidation theory, was developed to analyze the thermo-hydro-mechanical coupling in continuum rock mass. To verify the implemented program, one-dimensional consolidation model under the isothermal and non-isothermal conditions was analyzed and was compared with the analytic solution. The parametric study on two-dimensional consolidation was also performed and the effects of several factors such as poisson's ratio and hydraulic anisotropy on rock mass behavior were investigated. In the future, this program would be revised to be used for analysis of general discontinuous media with incorporating discrete joint model.

• Tunnel and Underground Space
• /
• v.8 no.3
• /
• pp.184-193
• /
• 1998

In order to dispose radioactive wastes safely, it is needed to understand the mechanical, thermal, fluid behavior of rockmass and physico-chemical interactions between rockmass and water. Also, the knowledge about mechanical and hydraulic properties of rocks is required to predict and to model many conditions of geological structure, underground in-situ stress, folding, hot water interaction, intrusion of magma, plate tectonics etc. This study is based on researches about rock mechanics issues associated with a waste disposal in deep rockmass. This paper includes the mechanical and hydraulic behavior of rocks in varying temperature conditions, thermo-hydro-mechanical coupling analysis in rock mass and deformation behavior of discontinuous rocks. The mechanical properties were measured with Interaken rock mechanics testing systems and hydraulic properties were measured with transient pulse permeability measuring systems. In all results, rock properties were sensitive to temperature variation.

• Tunnel and Underground Space
• /
• v.27 no.2
• /
• pp.100-108
• /
• 2017

As a measure of the combined effect of fracture geometry, the fabric tensor parameters could quantify the status of the connected fluid flow paths in discrete fracture network (DFN). The correlation analysis between fabric tensor parameters and hydraulic properties of the 2-D DFN was performed in this study. It is found that there exists a strong nonlinear relationship between the directional conductivity and the fabric tensor component estimated in the direction normal to the direction of hydraulic conductivity. The circular radial plots without significant variation of the first invariant ($F_0$) of fabric tensor for different sized 2-D DFN block are a necessary condition for treating representative element volume (REV) of a fractured rock mass. The relative error (ER) between the numerically calculated directional hydraulic conductivity and the theoretical directional hydraulic conductivity decreases with the increase in $F_0$. A strong functional relation seems to exist between the $F_0$ and the average block hydraulic conductivity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.987-995
• /
• 2013

The purpose of this study is to examine the hydraulic stability of non-toxic revetment technique for eco-friendly design of the domestic river restoration. Recently, instead of the flood control function-oriented river management policy for the engineering efficiency, the improvement of the environmental performance for the ecological river restoration project is implemented. However, the inappropriate hydraulic design criteria of the new revetment technique happen to the economic losses at flood season frequently. The hydraulic stability of the riprap and the block include the banks of rivers, riverbed protection, scour protection and so on. In this study, the high speed experimental channel was developed, which has the maximum velocity of 3.5 m/s, to perform the hydraulic experiments of the block method with non-toxic glue with various conditions to find the critical velocity of the revetment block for the hydraulic stability.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.95-103
• /
• 2023

Aircraft engine parts repair is a field belonging to the lowest level in the hierarchy of the aircraft industry, and it is marginalized in terms of research, compared to aircraft manufacturing or maintenance that belong to the upper level. On the other hand, in 2019, Korean Air's Powerplant Maintenance Center paid USD $130 million to foreign countries for engine parts repair, making it an industry with great need for localization. To achieve the goal of localizing engine parts repair, a certification system is needed that can perform independent repairs based on the development of repair technology, aligning contractual relationships with engine manufacturers, and free from dependence on engine manufacturers or foreign repair companies. The purpose of this study is to provide a basis for subsequent research to secure an actual certification system by suggesting the need for securing such a certification system.