• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.176-179
• /
• 2006

As spurious emission strength is normally measured at the antenna feeder, It is required that the measurement method on passive Intermodulation occurred on the latter part of antenna feeder be made. through the tests and the analyses of passive Intermodulation between radiostations of adjacent frequency bands, the possibility of occurrence of passive Intermodulation was testified in this study. The purpose of this study is to propose the measurement method of spurious emission strength in order to prevent the bad effect by passive Intermodulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.734-739
• /
• 2001

In this paper, the technique of analysis and optimization on the Passive intermodulation(PIM) in a filter using coaxial transmission resonator, is presented. The developed simulation technique can reduce PIM power without the degradation of the linear filter response, through the variation of filter dimensions. The increase of PIM in filter is depended on currents flowing through each resonator forming filter. The reduction of these currents therefore makes the reduction of PIM power.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1394-1401
• /
• 2008

This work investigates the effects of vibration on the passive intermodulation distortion characteristics of base station antennas for 800 MHz CDMA mobile communication systems. In general, base station antennas are located at high positions such as on building rooftops or iron towers. Thus the antennas are always affected by random vibrations, coming from various natural environmental factors such as rain and wind, or from living environmental factors such as vehicles and trains passing by. The measured intermodulation distortion characteristics before and after vibration accelerated degradation test show that vibrations are indeed the main cause for the intermodulation distortion performances of such antennas. To minimize the effects of vibrations, a new antenna design isptoposed that has an improved tolerance for vibrations. Experimental results show that the proposed antenna design dramatically reduces the degradation of the intermodulation distortion more than 35 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1201-1207
• /
• 2010

As the mobile services have been increased, the PIMD(Passive Inter-Modulation Distortion) as well as the active-IMD of the CDMA system should be considered for the design of base station antenna systems, because they have an interference of the neighboring base stations. In this paper, in order to reduce the nonlinearity of current caused by the local point contact, we have investigated an influence of the combination of nuts, contact torque(kgf.cm), and the contact area on the PIMD. We propose the improvement techniques of PIMD by investigating the effects of the distance of nuts, the contact area, and the type of nuts.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.355-358
• /
• 2002

This paper describe the passive intermodulation products(PIMs) which are formed in high power Ku-band transponder and antenna subsystem on the Communication St Broadcasting Satellite(CBS)program when two transmit carriers beat together to generate harmonics that fall into the receive band. How the PIMs are initially generated and the effect of PIMs for Ku-Band payload system are analyzed by calculating the PIMs frequencies and the power level of PIMs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1167-1174
• /
• 2001

Antenna PIM(Passive Intermodulation) level measurement results are rarely credited due to the external signal receiving characteristics of antenna, and seriously affected by the external PIM sources such as anechoic chamber absorber and antenna tower. In this paper, antenna PIM model for the Reflect PIM measurement method is presented. Through the null point phenomena of the PIM level obtained by antenna PIM model simulations and experimental results, we concluded that antenna PIM level measurements are greatly affected by the PIM level generated on the anechoic chamber absorber and the path differences of PIM signal reflected to the antenna.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.11
• /
• pp.1477-1482
• /
• 2001

In this paper, we examined receiving parameters of receiver and also analyzed them through simulation based on J-STD-018, which is the minimum specification of PCS mobile station. Receiving system was made a passive double balance mixer which has low gain and high IIP3, and an intermediate frequency amplifier for enhancing the low gain. The result of simulating receiving parameter is as follows: noise figure which is the parameter of specification of the receiving sensitivity is 6.746dB, IIP3 which is the parameter of specification of the intermodulation spurious response attenuation is -11.358dBm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.45-49
• /
• 2020

FEU which is a important device in HCTRS of TICN amplifies transmission signals. Tests of intermodulation distortion and harmonic distortion for FEU have been performed manually, and take a lot of time. This paper improves the test methods using program that set up the measurement instruments and read the data automatically. This proposal allows intermodulation distortion and harmonic distortion test simultaneously. And the new test methods show that the measurement time is shorter than before. Also, it is expected that efficient quality assurance is possible because the test time can be independently managed, unlike the previous methods, where the test time was determined according to the skill level of the operator.

• Convergence Security Journal
• /
• v.23 no.1
• /
• pp.19-25
• /
• 2023

The current network environment provides a real-time interactive service from an initial one-way information prov ision service. Depending on the form of web-based information sharing, it is possible to provide various knowledge a nd services between users. However, in this web-based real-time information sharing environment, cases of damage by illegal attackers who exploit network vulnerabilities are increasing rapidly. In particular, for attackers who attempt a phishing attack, a link to the corresponding web page is induced after actively generating a forged web page to a user who needs a specific web page service. In this paper, we analyze whether users directly and actively forge a sp ecific site rather than a passive server-based detection method. For this purpose, it is possible to prevent leakage of important personal information of general users by detecting a disguised webpage of an attacker who induces illegal webpage access using traceback information

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.797-803
• /
• 2012

Recently demands in construction of the stand-alone networks and interconnection between convergence devices have led an increase in research on and much attention has been paid to the application of MANET as a Ubiquitous network which is growing fast. With performance both as hosts and routers, easy network configuration, and fast response, mobile nodes participating in MANET are suitable for Embedded computing, but have vulnerable points, such as lack of network scalability and dynamic network topology due to mobility, passive attacks, active attacks, which make continuous security service impossible. In this study, hashed AODV routing is used to protect from counterfeiting messages by malicious nodes in the course of path finding and setting, and disguising misrouted messages as different mobile nodes and inputting them into the network.