• Korean Journal of Poultry Science
• /
• v.10 no.2
• /
• pp.97-101
• /
• 1983

A study was conducted to investigate possibility of utilizing dried citrus peel (DCP) as an ingridient of broiler diets. Fresh citrus peels were collected from a citrus processing plant, and were sun-dried and ground. Both chemical analyses and a feeding trial were carried out. DCP was analyzed for proximate nutrients, amino acids and some minerals. In the feeding trial, a total of 192 day-old female broiler chicks of Manor strain was divided into 16 groups of 12 birds each. Each group was fed one of the 4 different levels(0, 2, 4 and 6%) of DCP replacing an equivalent amount of wheat bran in the diet with 4 replications for 6 weeks. Body weight gain, feed intake and feed efficiency of broilers fed different levels of DCP showed no significant differences among treatments. Immediately after termination of the feeding trial, cach bird was examined for shank color using Roche's Egg Yolk Color Fan. Shank color index of birds increased consistently (P＜0.05) as the level of DCP fed increased, indicating that DCP can be used as a source of pigments. It was concluded from the results that DCP could be used up to 6% in place of wheat bran in broiler diets without adverse effects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.182-188
• /
• 2008

The compounds of recycled polyethylene(PE) and fly-ashes were prepared. Polymers used were sorted PE from mixed plastics of household waste and Low Density Polyethylene(LDPE) and Linear Low Density Polyethylene(LLDPE) recycled from the scrap of packaging film plants. Fly-ashes were from the power plant and from the household waste incinerator. The tensile strength of recycled LDPE and LLDPE compounds decreased and the flexural modulus increased with greater amount of the power plant fly-ash. Anthracite fly-ash gave rise to slightly higher tensile and flexural strength of the LLDPE mixtures than bituminous coal fly-ash presumably due to higher content of unburned carbon. The incinerator fly-ash introduced to household waste PE enhanced both tensile strength and flexural modulus of the compounds. When LDPE and household waste PE were used together, the synergistic effect of incinerator fly-ash to household waste PE was offset by reduced crystallization of LDPE due to the filler particle. The compounds of household waste PE and incinerator fly-ash might be applied to structural materials for such as sewage pipe, which reduces the waste treatment cost and conserve the environment and resources.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.62-72
• /
• 2009

In this paper, we propose an application of RFID(Radio Frequency Identification) tag to food wastes disposal system of Cheongju city. The existing system of Cheongju city is monthly fixed amount levy system. The weak point of this system must pay a same commission in spite of each other different food wastes quantity. Also the accurate occurrence quantity of the food wastes and present condition grasp of control are impossible. It will not be able to reflect to a policy decision because does not manage the control of the food waste efficiently. On the other hand, when a food wastes measuring system using RFID is executed tag, it will manage and analyze automatically the obtained data. And collecting, transporting and handling of the food wastes come to be very easy. Also the reproduction and embezzlement of the tag are impossible. As a result of this system, it brings the decrement of the food waste. Therefore the economic effect could be come true and the food wastes is controlled environment-friendly. The food wastes disposal system using RFID tag will be able to contribute in u-city constructions with RFID/USN technology which pursues from the government.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.104-110
• /
• 1997

Increase of marine transpotation in coastal area frequently yields oil spill accidents due to collision or grounding of oil tankers, which affects great deal of damages on ocean environments. Exact prediction of oil pollution area in time domain, which is called oil map, is very important for effective and efficient oil recovery and minimization of environmental damage. The prediction is carried out by considering the two distinct processes which are initial diffusion on the still water surface and advection due to tide, wind wave induced surface currents. In the present paper, only the initial diffusion is dealt with. Somewhat new simulation model and its numerical scheme are proposed to predict it. Simple diffusion experiment is also carried out to check the validity of the present method. Furthermore, some example simulations are performed for virtual oil spill accident. Quite realistic oil map including oil thickness distributions can be obtained by the present model.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.45-53
• /
• 2002

This investigation is performed to prepare reducing method drained floating debris from the river This paper is present an investigation result of the marine debris characteristics that drained from korea 4 big river(han river, kum river, youngsan river, nakdong river) during July and August. A mount of floating debris different with rainfall. Short heavy rain like as 150mm/day floating debris drained lower, almost floating debris drained when a flooding cause by continuance heavy rain. Floating debris draining is not continuance, but concentrated on a flooding. All debris is do not drained ocean, a lot of debris accumulated riverside. Floating debris is drained with plant and configuration is similar with other river. But, the component ratio is different, so that, to Prepare removing method for floating debris consider that effect of plant debris.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.2
• /
• pp.63-69
• /
• 1996

Korean cabbage waste is produced in huge amounts in the process of dealing, and most of them are discarded imposing burden on our environment. In case of Garakdong agricultural and marine market in Seoul, the daily average amount of Korean cabbage waste is estimated more than 355ton(64.1% of the overall amount in waste occurrence). Recycling the cabbage waste is important for the protection of environment and reuse of waste materials. We examined the present situation of occurrence of the cabbage wastes, normal properties of the dietary fiber, and the conversion of high value-added dietary fiber from the cabbage wastes. As a result of examination of the content of dietary fiber in Korean cabbage waste, we found that the dietary fiber content(2.5%) was higher than the known value(0.7%), and that in the process of extraction of dietary fiber, there was no significant difference between the samples added with amylase and protease compared to control.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1996.05a
• /
• pp.15-33
• /
• 1996

우리나라의 토양은 지형적인 요인과 토양모재 및 기후적인 조건에 의해 토양에 유입되는 유해물질에 대한 보유력이 낮은 특성으로 인해 외부에서 유입되는 유해 중금속에 대하여 취약한 특성을 가지고 있다. 우리나라 토양의 중금속 자연 함유량은 논토양의 경우 Cd 0.13, Cu 4.15, Pb 4.17, Zn 3.95 mg/kg의 수준이며 밭토양은 Cd 함량이 논토양보다 높은 수치를 보인다. 과수토양은 과거에 중금속이 함유된 영농자재가 투입된 결과로 자연함량을 결정하기 힘드며 매우 높은 중금속 농도를 보인다. 그리고 현재 토양환경보전법이 시행되어 중금속류 및 유해유기물에 대한 오염기준을 제시하고 있다. 토양의 중금속 오염현황은 환경부의 토양오염 측정망에서 금속광산, 제련소, 매립지 부근에서 높은 농도를 나타내고 있으며, 산업폐수 및 생활하수가 관개수로 유입되는 논토양에서 중금속 오염이 우려되고 있다. 제련소 및 금속광산 부근의 토양은 거리에 따라 중금속 농도가 감소하는 경향을 보이고 있으나 인접지역에서는 규제농도에 육박하거나 초과하고 있다. 또한 폐광산 부근에서 생산된 현미 역시 전반적으로 작물재배제한 기준를 초과하지는 않으나 상당 지역이 이 기준을 초과하고 있으며 0.1 M HCl로 침출가능한 Cd 함량과 상관관계를 보인다. 이 상관관계에 의하면 0.1 M HCl로 침출가능한 토양 중 Cd의 양이 5 mg/kg 이면 생산된 현미의 Cd 함량이 1 mg/kg을 초과할 확률은 40%인 반면, 일본 식량청 수거대상인 0.4 mg/kg을 초과할 가능성은 100%로 파악된다. 광명시 가학광산 인근 지역을 대상으로 한 중금속 오염에 대한 대책연구에서는 현미 중 Cd 함량이 0.4 mg/kg을 초과할 가능성이 높은 지역(토양 농도 5 mg/kg)은 최소 20 cm 이상 두께로 객토를 하고, 현미 중 Cd 함량이 0.4 mg/kg 을 초과할 가능성이 낮은 지역은 석회, 규산질 비료, 용성인비, 등을 사용하여 중금속의 용해도를 낮추어 작물이행을 경시키는 것이 바람직한 것으로 판단되었다. 그리고 광미사를 현위치에서 처리하는 방안이 제시되었다.

• Journal of Animal Environmental Science
• /
• v.17 no.1
• /
• pp.23-32
• /
• 2011

The purpose of this study is development of the sprayer that can effectively control pathogens. Image processing was used to analyze the sprayer. Experimental paper in the form of $5{\times}7$ 10 m intervals total of 35 sheets were installed. Experiment used binarized image data obtained by sprayed pigment, to analysis spray volume and distance. The experimental results show that 60 m distance was available to the spray. And spray rate was high up to 30 m. It can be used in livestock farms are expected.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.2
• /
• pp.57-66
• /
• 2014

The leachate recirculation anaerobic digestion system has the advantage of stable methane gas generation compared with existing one phase systems. In this study, an anaerobic digestion system fed with source separated food waste from school cafeteria was studied with different food waste/inoculum anaerobic sludge volume ratios (8:2, 3:7, 2:8). From this study, leachate recirculation anaerobic reactor with food waste/inoculum anaerobic sludge volume ratio of 2:8 that is 9 gVS/L of OLR(Organic Loading Rate) had the highest gas production. Also this anaerobic reactor showed daily decrease of H2S and NH3 contents in produced gas. Average biogas yield was 1.395 m3 Biogas/kg VS added. Other anaerobic reactors with food waste/inoculum anaerobic sludge volume ratio of 8:2 and 3:7 stopped methane gas production.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.342-348
• /
• 2018

The present study examined the various strength and deformation performances of molding materials recycled using film packaging wastes to ascertain the their applicability to secondary products in construction industries. The stress-strain relationships of molding materials were measured under compression, tension, and flexure in accordance with the ASTM procedure. The measured mechanical properties of recycled molding materials were comparable to typical ranges observed in low-density polyethylene and/or high-density polyethylene. However, to stabilize the properties of the molding materials, further management systems are required as follows: 1) evaluation of mechanical properties of materials with respect to various mixing proportions of waste ingredients; 2) estimation of the effect of foreign substance and moisture contents on the mechanical properties; and 3) establishment of comprehensive database including various sources such as manufacture process including applied pressure to produce the molding materials, and collection region and time of wastes.