• 한국항해학회지
• /
• 제14권1호
• /
• pp.57-67
• /
• 1990

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.147-155
• /
• 2006

Ice resistance estimation equations based on model tests and full-scale sea trial data from many previous research articles are studied. Measured ice resistance data and its empirical/semi-empirical estimation equations are summarized in common format and are compared with each other, considering three ship categories, i.e, icebreakers, tug/supply vessels, ice-strengthened cargo vessels. The most suitable estimation methods or prediction equations are recommended based on this ice resistance data analysis.

• 대한조선학회논문집
• /
• 제55권4호
• /
• pp.306-312
• /
• 2018

To navigate in ice-covered waters, the ice-breaking process is required. The ice-breaking mode depends on material properties of sea ice and ice conditions. The ice-breaking mode is classified into ramming and continuous ice-breaking. The ramming is effective on large ice features, such as thick ice ridge and icebergs, and the continuous ice-breaking is on level ice. In general, the impact time duration of crushing or bending on ice sheets is from 0.2 to 1.0 second. However, impact duration in ramming will be increased. The Korean ice-breaking research vessel ARAON conducted her research voyage in the Antarctic sea during the winter of 2012. The IBRV ARAON measured strain in ramming and continuous ice-breaking. Strain gauge signals were recorded during the planned ice-breaking performance and the unplanned ice transits in heavy ice conditions. The aim of this study is to investigate the ice load signals measured in ramming processes under the heavy ice condition. Based on the time history of the signals, a raising time, a half-decaying time and time duration were investigated and compared with the previous study which was suggested the five profiles of the ice load signals.

• 대한조선학회논문집
• /
• 제29권4호
• /
• pp.87-97
• /
• 1992

극지방의 천연자원의 수송에 필수적인 빙해항행선박은 금후 우리나라의 조선산업이 지향해야 할 기술집약형 선박중 하나로서 국제경쟁에 대비하여 독자적인 연구가 요구되는 분야이다. 본 연구는 빙해항행선박 기본설계의 중요한 인자인 선수부 형상과 평탄빙에서의 쇄빙능력 사이의 상관관계를 밝히는데 목적이 있다. 통상 평탄빙(level ice)에서 선박의 전진속도를 3-4 knots로 볼 때, 탄성으로 취급되는 얼음의 재료특성을 고려하여, 파괴시킬 수 있는 얼음의 최대두께와 파괴된 얼음의 특성길이를 수치적으로 추정하는데 주안점을 두고 있다. 본 연구에서는 빙해항행 선박이 평탄빙에서 연속쇄빙을 하고 있는 상황을 탄성지지기반 위에 놓인 유한 길이의 쐐기보에 작용한 충격하중의 문제로 가정하고 굽힘모멘트에 의해 어떤 위치에서 발생한 최대인장응력이 얼음의 굽힘파괴강도에 도달한다면 그 부분에서 파단이 일어날 가능성이 가장 높다고 판단한다.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.28-33
• /
• 2015

The icebreaking research vessel ARAON had her second ice trial in the Arctic Ocean from July 16 to August 12, 2010. In this study, the ice loads measured during the “general” operation and “ice breaking” operation in ice-covered waters were analyzed and compared. Whereas the “general” operation stands for the voyage in the water partially covered by ice, the “ice breaking” operation involved substantial ice floes for the ice breaking performance test. Based on the measured data, comparisons of the relationship between the ship speed and ice load, and between the locations of strain gauges and ice loads were investigated. Peak stresses higher than 20 MPa were found. The longitudinal and vertical correlations between the measurement location and ice load were analyzed, and the probability of peak stress was calculated. As a result, the probability function for higher ice loads during both operation modes was expressed in an exponential and power forms.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.350-358
• /
• 2010

The present paper deals with the comparative study of resistance performance with refrigerated ice and synthetic ice according to the variation of hull form characteristics. The resistance test has been conducted in pack ice condition in each concentration condition. Stem angle has been chosen as main parameters for the variation of hull form characteristics. The correlation of performance between with the refrigerated ice and with the synthetic ice has been shown according to the variation for stem angles. The present study show the possibility of ice test in general towing tank with synthetic ice for the time-consuming research such as hull form optimization although that is confined in pack ice condition. The more parametric study for the properties of synthetic ice is expected to be conducted to have more close correspondence for the test results of refrigerated ice in near future.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.1-8
• /
• 2012

To correctly estimate ice load and ice resistance for a ship's hull, it is essential to understand the material properties of sea ice during ice field trials and to use the proper experimental procedure for gathering ice strength data. The first Korean-made icebreaking research vessel (IBRV), ARAON, had her second sea ice trial in the Arctic Ocean during July and August of 2010. This paper describes the test procedures used to properly obtain sea ice strength data, which provides the basic information on the ship's performance in an ice-covered sea and can be used to estimate the correct ice load and ice resistance on the IBRV ARAON. The data gathered from three sea ice field trials during the Arctic voyage of the ARAON includes the ice compressive strength, flexural strength, and failure strain of sea ice. This paper analyzes the gathered sea ice data in comparison with data from the first voyage of the ARAON during her Antarctic Sea ice trial in January 2010.

• 대한조선학회논문집
• /
• 제48권3호
• /
• pp.254-259
• /
• 2011

The first Korean-made icebreaking research vessel "ARAON" had her second sea ice trial in the Arctic Ocean in Aug. 2010 after her first voyage to Antarctic Ocean in Jan. 2010 to gather various material and strength characteristics of sea ice. This is a detail report of ARAON 2010 summer Arctic voyage and this paper describes a standard test procedure to obtain proper sea ice data which provide basic information to estimate ice loads and icebreaking performance of the ship. The data gathered from sea ice in the Chukchi Sea and Beaufort Sea during the Arctic voyage of the ARAON includes ice temperature/salinity and the compressive/flexural strength of sea ice. This paper analyses the gathered sea ice data in comparison with data from the first voyage of the ARAON during her Antarctic Sea ice trial.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.340-347
• /
• 2007

Main purpose of the study is to develop a transit model for icebreaking cargo vessels in the Northern Sea Route and to select optimum sea routes with the shortest navigation time and the lowest operation cost. This numerical model executed with basic information such as ship capabilities, transit directions and months of transit, can calculate total transit distance and elapsed time, mean speed, operation cost for each vessel. In the transit model. environment information such as the site-specific ice conditions, wave and wind states are utilized for four different months (April, June, August, and October) along the Northern Sea Route. The model also defines a necessary period of an icebreaker escort. Then the optimum sea routes are selected and visually displayed on the digital map using a commercial software ArcGIS. Usefulness of the selected sea routes is discussed.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.134-140
• /
• 2011

The present paper deals with characteristics of resistance performance according to the variation of synthetic ice thickness and hull form. The resistance test has been conducted with pack ice condition in Pusan National University towing tank. Waterline angle has been chosen as a main parameter for the variation of hull form characteristics, which is the most important factor especially in icebreaking cargo vessel. The serial comparisons of resistance test have been done with the variation of hull form parameter as well as with the different thickness of synthetic ice. The different trend of resistance performances with increasing of waterline angle has been shown at each synthetic ice thickness. The present test results is expected to be confirmed by comparing the test results in ice tank in the near future.