• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.168-168
• /
• 1996

가는잎쇄기풀(Urtica angustifolia Fisch.)은 쇄기풀과(Urticaceae)에 속하는 다년생 초본으로 중약 또는 민간에서 동속 근연식물과 함께 전초를 담마라하여 류마치스성 동통, 산후의 산풍, 소아의 추풍, 경풍,담마진의 치료에 사용되고 있다. Rat에서 실험적 항당뇨 효과를 검토해본 결과 혈당강하 작용이 있는 본 식물로부터 그 혈당강하 성분의 분리에 앞서 식물화학 성분을 규명하고자 본 실험에 착수하였다. 가는잎쇄기풀 전초의 MeOH ex.를 CH$_2$Cl$_2$, EtOAc, n-BuOT 및 $H_2O$로 분획하고 각종 column chromatography를 통하여 다수의 화합물을 분리하였다. 각 화합물은 이화학적 성상 및 spectral data로부터 scopoletin, esculetin dimethyl ether(scoparone), sterol mixture, $\beta$-sitosteryl-3-o-glucoside, kaempferol-3-o-glucoside, quercetin-3-o-glucoside, kaempferol-3-o-rutinoside로 확인하였으며 그 외 다수의 화합물은 그 구조를 규명중이다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.243-249
• /
• 2001

This paper has been presented the hydrodynamic effect by the journal speed, eccentricity and source positions in order to overcome the defects of air bearing such as low stiffness and damping coefficient. Choosing the two row source position of air bearing is different from existed investigations in the side of pressure distribution of air film because of the high speed of journal and the wedge effects by the eccentricity. These optimal chooses of the two row source positions enable us to improve the performance of the film reaction force and loading force as making the high speed spindle. In this paper, the pressure behavior in theory of air film according to the eccentricity of journal and the source positions analyzed. The theoretical analysis have been identified by experiments. The results of investigated characteristics may be applied to precision devices like ultra-precision grinding machine and ultra high speed milling.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.368-370
• /
• 2001

폴리비닐알코올(poly(vinyl alcohol) (PVA))은 구조적인 단량체인 비닐알코올의 호변 이성질화 때문에 직접 중합에 의해서는 얻을 수 없으며, 아세트산 비닐 (vinyl acetate (VAc))이나 피발산 비닐 (vinyl pivalate (VPi))같은 비닐에스테르 계열 단량체를 사용하여 중합과 비누화 반응을 거쳐 제조되고 비누화 반응에서 모든 측쇄기가 효과적으로 제거되는 히드록시기 함유 선형 결정성 고분자이다[1-4]. (중략)

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.718-725
• /
• 2002

A wall type friction damper is newly Proposed in this paper to improve the performance of R/C framed structures under earthquake loads. Although traditional dampers are usually placed as bracing members, the application ot bracing-type dampers into R/C structures is not as simple as those of steel structures due to the connection between R/C members and dampers and the stress concentration in connection region. Proposed damper is consisted of Teflon-sheet slider and R/C shear wall. The damper can also avoid stress concentration and reduce P-Δ effect. To evaluate the performance of proposed damper, nonlinear dynamic analyses are carried on 10 story and 3 bay R/C structures with numerical model for the damper. It is shown that the damper reduces the inter-story drifts and the time-historic responses; especially the damper prevents from forming plastic hinges on the lower columns.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.2
• /
• pp.146-151
• /
• 2015

Recycled aggregate by the recycling construction waste has a lot of advantage such as the developing the alternative resource and protecting of environment. However, recycled aggregate is used as the low quality grade, because it is difficult to remove old mortar from aggregate. To use the recycled aggregate as high quality grade, it is important to develop the technology to produce the high quality recycled aggregate. To manufacture the high quality recycled aggregate, old mortar attached on the aggregates should be removed efficiently. Therefore, in this study, we suggested the optimum condition to remove old mortar effectively using sulfuric acid and low speed wet rotary mill for high quality recycled fine aggregate. The results shows that the recycled aggregate satisfy on the standards of KS F 2573 in density, absorption and solid volume, when adequate condition of sulfuric mole ratio and aggregate ratio are make.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.177-180
• /
• 2000

In this study, we investigated the pretilt angle generation and liquid crystal (LC) alignment by ultraviolet (UV) exposure during imidization of polyimide on the polymer with side chain. The generated pretilt angle of nematic (N) LC using in-situ photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, the generated pretilt angle of NLC tends to increase by annealing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1184-1193
• /
• 2010

The upper frequency of international EMC regulations is being expanded above 1 GHz. Radiated emissions above 1 GHz are different from those below 1 GHz that is existing upper regulation frequency, and which have lower field strength and sharper and tilted beam-width, relatively. In this paper, an effective evaluation method to be used above 1 GHz is studied using an offset parabola antenna system having a double-ridged horn antenna as a feed. First, simple model is proposed for calculating antenna factor and field uniformity of the parabola antenna system, and then real radiated emission and radiated susceptibility measurements are performed using a constant noise emitter and the suggested antenna system. The results show that the proposed antenna system has higher gain and power efficiency, and wider field uniformity relative to a conventional double-ridged horn antenna. Therefore, it is confirmed that the proposed system can be effectively used for EMC measurements above 1 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5A
• /
• pp.543-550
• /
• 2011

In order to improve readability, a leakage-signal canceller has been proposed in UHF-band RFID readers. The proposed canceller is composed of two blocks: an environment monitoring block for detection of Tx and RX power levels and a leakage cancellation block. The leakage canceller consists of directional-couplers, digital attenuators and phase shifters based on the feed-forward scheme. The leakage canceller is located between antenna and reader. An improved experimental characterization of the scheme is presented with results from the reader operating in the Korean RFID frequency band, conforming the validity of the approach with more than 29 dB of leakage cancellation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.53-58
• /
• 2006

The Korean Ministry of Agricultural & Forestry(MAF) has designated some model areas and has supported financially to encourage sustainable farming under the environment-friendly agriculture rearing project(EARP) since 1995. This study was conducted to diagnose the project and to find ways to improve the effectiveness of EARP. The 18 areas (823 ha) such as Gyeonggi-Do, Gangwon-Do, Chungcheongbuk-Do, Chungcheongnam-Do, and Jeju-Do of 32 areas under EARP in 2004 were examined. Most of the practices implemented in EARP areas were not practical for sustainable agriculture except some equipments and facilities. It was thought that practical technologies for sustainable agriculture were more essential than equipments and facilities to improve the effectiveness of EARP. And area-specific technologies are needed to decrease environmental pollution. For example, liquefied slurry application and duck-rice farming in paddy fields near a watershed could increase the possibility of water pollution by nutrient outflow. Soil characteristics were important factors that could affect the effect of practices on environment conservation. Woodchip application and subsoil crash were not effective in coarse-textured soils. It was recommended that every practices under EARP should be re-examined in the light of the effects on environment before implementation and be evaluated by experts after completion.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.385-388
• /
• 2008

Recycled fine aggregate has low quality because it contains large amount of old mortar. So, its usage is limited to a lower value-add, such as the roadbed material etc. Also, alkaline water occurred from treatment process of the waste concrete is becoming the cause of environmental problem. Accordingly, this study is to develop on the high quality recycled fine aggregate produced by low speed wet abraser using sulphuric. We investigated the properties of compressive strength of the mortar which was manufactured using recycled fine aggregate containing calcined gypsum produced by earlier mentioned process. Test results indicate that concrete using recycled fine aggregate containing calcined gypsum is higher compressive strength than concrete using other sands.