• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.30-35
• /
• 2017

The major parts of a vacuum cleaner are molded. The vacuum cleaner works in multi-load conditions. Therefore, the designer needs to optimize the structure and injection molding conditions simultaneously. Here, the main factor of design is the rib shape and thickness. The greater the rib thickness, the greater the stiffness of the structure. However, it causes an increase in weight. On the other hand, the lower the rib thickness, the greater the increase in the injection pressure. However, the weight will be reduced. Therefore, the designer needs to optimize the rib shape and thickness for structure stiffness and injection molding. In order to solve this problem, we propose an optimization method using D.O.E and a response surface model, which is a multi-objective optimization method using the multi-objective genetic algorithm.

• 소성∙가공
• /
• 제19권3호
• /
• pp.185-190
• /
• 2010

Application of CAE analyses are wide spread in shaping processes and structural safety verification of plastic products. The importance of CAE analysis and its contributions are getting increase since the processibility and structural safety of product can be predicted. CAE analysis for complex shaped product need a lot of time for modeling and computation compare with simpler one. Therefore careful simulation modeling is required for complex shaped product. Structural analysis for plastic door handle of automobile has been performed and structural safety has been investigated for various load directions and modeling cases. Large stress occurred at the hinge in handle regardless of load direction and modeling case. Consequently hinge is considered structurally very weak among the parts in plastic door handle. It is concluded that simple modeling rather than total modeling with adequate boundary condition equivalent to real situation gives reasonable computational results with saving modeling effort and computation time.

• 산업공학
• /
• 제16권4호
• /
• pp.515-525
• /
• 2003

In this study, a prototype liquid container combined with auxiliary handles was designed to increase the safety of manual handling and protect from contamination of hands of people who use these containers. Likert summated rating method as well as pairwise ranking test was applied to evaluate the user preferences for provided handles of the container under the conditions of different shapes and positions. The results show that the subjects preferred perpendicular orientation of the handle on the top of the liquid container while carrying the containers and the crosswise position of the handle at the side of the container while pouring the liquid were preferred. A prototype liquid container with provided auxiliary handles was developed based on the results of evaluation. It is thus recommended that the liquid container provide extra handles to reduce the musculoskeletal stress and in turn to increase the user satisfaction.

• 한국안전학회지
• /
• 제23권1호
• /
• pp.51-56
• /
• 2008

This study aims to investigate the effect of handle angles of pliers on performances of task completion time and the number of errors, and subjective ratings of preference. For doing this, an experiment was conducted, where 14 subjects of 11 college-age male and three female students participated. In the experiment, plier handles angled at $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, and $40^{\circ}$ were used as independent variable, and the task completion time and the number of errors, and subjective ratings of preference as dependent variables. The subjects were instructed to do two tasks of bending an iron plate by $90^{\circ}$ and cutting wires. The results revealed that while the performances of task completion time and the number of errors were not statistically different depending upon the handle angles of pliers, the subjective ratings of preference were significantly different. Based on the results, it is recommended that the pliers with handles bent by $20^{\circ}$ be used in real situations.

• 산업공학
• /
• 제17권1호
• /
• pp.104-112
• /
• 2004

The purposes of the study were twofold: to investigate the stereotype of position and direction that the users expect when operating the handles of a water faucet in different directions, and to collect information about user’s preferred directions. Six hundred subjects, aged from teens to over sixties, participated in the experiment with the procedure of showing them actual water faucets of a lever-type handle and two round-shaped handles mounted on the sink(horizontal plane) and wall(vertical plane). The water faucets presented to the subjects were most widely used devices in our living environment. The results showed that when the handle of the lever-type water faucet was in the 'up' position, 63% of the subjects expected the device was 'open'. When the cold hot separated water faucets were mounted on the horizontal or vertical plane, over 50% of those who answered the 'open' direction of round type handles responded as 'counter clockwise' for a 'hot' water faucet and 'clockwise' for a 'cold' water faucet. In conclusion, this study suggests that water faucet devices be designed and installed in the way that the users expect them to operate.

• 한국가구학회지
• /
• 제28권1호
• /
• pp.72-79
• /
• 2017

The knobs of the Joseon dynasty furniture were mainly made with metal in its consideration about durability and decorative characteristics, small pieces of furniture, the Kori types of knobs, big furniture, that desires, descendants. Meanwhile huge furniture had Butchimdae which can be used also as the locking mechanisms, or just the locks which were used as handle. The handle type included the idea of shamanism that desiring health and longevity, scholarly spirit and prosperity of descendants, therefore the design metaphorically contained the shape of the long-living and prolific animals and plants. Even though traditional furniture were constructed as succinct proportions and simple decoration because of the affect of Confucianism. Therefore, we can notice the hope forefathers indwelling in the handles made of metal.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 추계학술대회 논문집
• /
• pp.1111-1115
• /
• 2003

본 연구에서는 일반 공기 중의 산소 농도(21％) 환경에 비해 외부에서 고 농도(30％)의 산소 공급이 인지 능력 중 특히 언어 능력에 어떠한 변화를 유발하는지 관찰하고자 한다. 9명의 오른 손잡이 남자 대학생을 본 연구의 실험 참여자로 선정하였다. 21％와 30％ 산소 농도를 각각 8L/min의 양으로 일정하게 공급할 수 있는 장치를 개발하여, 마스크를 통하여 실험 참여자에게 전달하면서 언어 과제를 수행하게 하였다. 동시에 3T MRI를 이용하여 뇌기능 영상을 획득하였다. 언어 능력 측정을 위해 28 문항을 포함하는 두 개의 문제지를 제작하였고, 과제 수행 결과로부터 정답률을 산출하였다. 21％에 비해 30％ 산소 농도에서 평균 정답률은 유의미한 증가를 하였고, 뇌 활성화 양도 증가하였다. 본 연구의 결과로부터 외부에서의 고농도의 산소 공급이 언어 능력 증가에 긍정적인 영향을 미친다는 결론을 도출할 수 있다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2017년도 제55차 동계학술대회논문집 25권1호
• /
• pp.201-202
• /
• 2017

공명은 외부에서 진동계를 진동시킬 수 있는 힘을 가했을 때 그 고유진동수와 외부에서 가해주는 힘의 진동수가 같으면 그 진동은 심해지고 진폭도 커진다. 진동체가 서로 연결되어 있는 경우, 양쪽 진동수가 같으면 공명에 의해 에너지를 서로 교환하는 현상이다. 본 논문에서는 경남 사천에 소재하는 백천사의 사찰 마당에 있는 청동 대야를 사람이 손잡이를 문지를 때 발생하는 파동 현상을 고찰한 연구이다. 청동 대야에서 발생하는 진동수는 3가지 성분이다. 이 음은 복합음의 일종으로 볼 수 있다. 복합음의 기본 특성은 기본음이 배음보다 음압이 크다. 철제에서 생성되는 음압의 형태와 단조로운 순음인 경우가 많다. 청동 대야의 음압은 맥놀이 특성을 나타내고 있어 진폭변조의 포락선을 형성하고 있다.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2003년도 제8차 학술대회 초록집
• /
• pp.26-26
• /
• 2003

목적： 본 연구의 목적은 미각자극에 대한 인간 뇌의 활성화 영역을 측정하고 가시화하여 미각의 뇌 활성화 부위에 대한 기초자료를 마련하는데 있다. 대상 및 방법： 5명의 남자 대학생 (평균 24.8세)을 뇌기능 연구의 실험 대상자로 선정하였고, 대상자들은 미각에 이상이 없고 구강수술 경험이 없는 오른손잡이를 대상으로 3번에 걸쳐 EPI 혈액산 소농도의존(blood oxygen level dependent)법을 이용하여 미각자극에 의한 기능적 자기공명영상 실험을 수행하였다. 미각 자극을 위하여 5％의 saline을 사용하였으며 자체적으로 제작한 Stimulator를 사용하여 자극하였다. 자극은 3회의 휴식기간과 2회의 자극기간에 걸쳐 시행하였으며, 각 자극기간은 30초씩 5초 간격으로 이스 당 42개의 영상을 획득했다. Post-processing은 SPM99 (Statistical Parametric Mapping 99, The Wellcome Department of Cognitive Neurology, Oxford 1999)의 correlation법을 사용하여 threshold 0.4∼0.7의 범위에서 통계처리 하였으며, 활성화 영상은 EPI영상과 같은 부위의 T1 강조영상에 overlapping시켰다. 이렇게 얻어진 fMRI 영상으로 활성 영역의 위치를 분석하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.355-360
• /
• 2000

Recently, to be satisfied the consumer's demand the life cycle and the lead time of product is to be shorted. So it is important to reduce the time and cost in manufacturing prototypal mold. These days, in order to reduce the lead time and cost high speed machining is highlighted. In the paper, using the high speed machining and aluminum-7075, the fundamental experiment is implemented in the change of cutting force, machining time, surface characteristic according to the tool path. And then the prototypal mold of the automatic knob is machined.