• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1121-1125
• /
• 2006

급속한 산업화와 도시화로 인하여 이상기후의 발생빈도가 높아지고 기후가 불안정해져서 예전보다 많은 집중호우가 발생되고 있다. 그리고 최근 홍수의 규모와 발생빈도가 증가하면서 홍수로 인한 인명과 재산상의 손실이 반복되고 있다. 이에 따른 홍수피해의 위험을 줄이기 위한 홍수방지시스템의 구축이 절실히 요구되고 있으며 홍수범람구역의 정확한 추정을 위해서는 홍수범람도 작성이 필요하다. 또한 정보통신산업이 급속도로 발전하면서 인터넷 사용의 증가로 많은 사용자들이 웹(Web)을 통해 다양한 데이터를 공유할 수 있고 정보를 검색할 수 있게 되면서 수자원 분야에도 정보의 공유와 자료의 통합을 위하여 Open GIS(The Open Geodata Interoperability Specification) 개념이 도입되고 있다. 따라서 본 연구에서는 Web기반으로 홍수범람모의 시스템을 구축하기 위한 기초연구로서 홍수 발생시 침수피해지역을 대상으로 실시간 3차원 홍수범람모의해석이 가능하도록 함으로써 연안지역 피해주민들의 피해를 줄일 수 있도록 하였다. 먼저, 본 연구에서는 이전의 시스템 상에서 정적인 지도로서 표현만 가능하던 것을 시공간적으로 유동성 있는 자료의 분석을 시각화하는 GIS 공간정보기술과 접목시켜 Web상에 동적인 지도형태로 표현함으로써 피해주민들이 쉽게 접할 수 있도록 하여 다양한 정보의 제공이 가능하게 될 것이다. 둘째, Web을 이용함으로써 실시간 홍수재해 정보를 수집하고 분석할 수 있어 인명과 재산의 피해를 줄일 수 있을 것으로 판단된다. 본 논문은 홍수범람시스템을 구축하기 위한 기초연구로서 현재는 GIS DB를 구축하는 단계에 있으며, 향후 다양한 유역을 대상으로 홍수범람모의시스템을 구축하여 분석결과를 피해지역주민 및 관련기관 실무자들에게 제공함으로써 시간과 공간에 구애받지 않는 재해관리와 신속한 재해 상황 대처가 가능해 질 것으로 사료된다.는 또 다른 형태의 주제도라고 볼 수 있으며, 이를 구축하기 위해서는 자료변환 및 가공이 필요하다. 즉, 각 상습침수지구에 필요한 지형도는 국립지리원에서 제작된 1:5,000 수치지형도가 있으나 이는 자료가 방대하고 상습침수지구에 필요하지 않은 자료들을 많이 포함하고 있으므로 상습침수지구의 데이터를 인터넷을 통해 서비스하기 위해서는 많은 불필요한 레이어의 삭제, 서비스 속도를 고려한 데이터의 일반화작업, 지도의 축소.확대 등 자료제공 방식에 따른 작업 그리고 가시성을 고려한 심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할 수 있으며, 특히, 한국주식시장에 적합한 거래전략은 반전거래전략이고, 이 전략의 유용성은 투자자가

• Land and Housing Review
• /
• v.5 no.1
• /
• pp.41-51
• /
• 2014

The amount of new apartment construction has been trending upward in 3~4% each year since 11% increase in 2002. Currently, in public apartment construction sites under separate delivery system for construction waste processing, the significant difference between estimated quantity for contract and actual amount frequently causes severe controversy among project participants. Many factors such as poor environmental management, inadequate contractual amount are assumed to influence the above problem, and the requirement to revise existing generation rates, the key criteria applied in estimating the quantities of waste, is increasing. Most of generation rates were established in early 2000's, and have difficulty in reflecting the changes from new materials and technologies accordingly. Therefore, this study aims to clarify the types of construction waste for each trade and the forecast method as preliminary work in order to develop more accurate generation rates for construction waste in new construction. To achieve this purpose, the architectural bills of quantities in ten apartment projects executed during 2010~2013 were collected, and the possible waste types and reasonable material loss ratio for each item from temporary works to owner-supplying material area were defined and compared through the workshops and interviews with the experts and on-site environmental managers. The results of this study will contribute to establishing the categories of construction waste for construction trades and proper generation rates by the indirect estimation method in new apartment construction in the follow-up study.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.71-79
• /
• 2004

In the stage of feasibility study of urban rehabilitation projects, the precise forecast of physical and environmental changes has great influence on the further transaction of the projects. However, various important decision makings are made by the experience and intuition of the person-in-charge in practice without the process and method for systematic and quantitative analysis. In spite of various qualitative influent factors on the projects, the feasibility studies are made by the result of economic analysis only, which often lead the projects to the crucial deficit. The main reasons of such a mal-functional transaction are due to the absence of the reasonal procedure of feasibility study and decision making reflecting the characteristics of urban rehabilitation projects. The objective of this paper is to propose feasibility study processes and decision making methods in relation to various influent factors on urban rehabilitation projects in the initial stage. The goal and process of every analysis stage and the pertinent factors and decision makings are analyzed and proposed through the survey of current research, a case study, interview with the professionals. The processes and methods are well applied to improve current problems of feasibility study of urban rehabilitation projects. In addition, the establishment of the analysis goal at three principal stage and a series of reasonable decision makings with pertinent factors to each stage will lead the project to more successful result than ever.

• Journal of Chest Surgery
• /
• v.29 no.8
• /
• pp.897-904
• /
• 1996

A preoperative prediction of postoperative pulmonary function after the pulmonary resection should be made to prevent serious complications and postoperative mortality. There are several methods to predict postoperative lung function but the 99m7c-MAA perfusion lung scan is known as simple, inexpensive and easily tolerated method for patients. We studied the accuracy of the perfusion lung scan in predicting postoperative lung function on 34 patients who received either the resection of one lobe(17 patients) or 2 lobes(2 patients) or pneumonictomy(15 patients). We performed pulmonary function test and lung scan immediately before the operation and calculated the postoperative lung function by substracting the regional lung function which will be rejected. We compared this predictive value to the observed pulmonary function which was done 20 days after the surgery. We also compared the data achieved from 12 patients ho received open thoracotomy due to intrathoracic disease that are not confined in the lung. The correlation coefficient between the predicted value and observed value of FEVI .0 was 0.423, FVC was 0.557 in the pneumonectomy group and FEVI . 0 was 0.693, FVC was 0.591 in the lobectomy group. The correlation coefnclent between the'postoperative value and preoperative value of FEVI .0 was 0.528, FVC was 0.502 in the resectional group and FEVI .0 was 0.871, FVC was 0.896 in the comparatives. We concluded that the perfusion lung scan is accllrate in predicting post-resectional pulmonary function.

• The Korean Journal of Mycology
• /
• v.30 no.1
• /
• pp.61-65
• /
• 2002

The objectives of this study were to find the nuruk fungal isolate for Korean traditional rice wine and to compare the tastes of rice wines made with its single inoculum. The fungal isolates including the species of Absidia, Mucor, Rhizopus and Aspergillus were used for Korean traditional rice-wine production. The four species were cultured and measured for productions of amylase under various water contents. The four different species tested were different in their growth under the rice cereals with different moisture contents; the species of Absidia and Rhizopus grew better compared to the other species under the lower moisture conditions. The tastes and alcohol concentrations of the rice-wines made with each different inoculum were compared with those of commercial rice wines made with traditional method. As a result, it was speculated that the traditional rice wines were made with nuruk, which is mainly composed of Zygomycetous fungi, such as Absidia, Mucor, and Rhzopus. Also, it was strongly suggested that the traditional nuruk might not be a source of amylase, but a source of fungal inoculum.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.29-36
• /
• 2009

In this paper, the design and implementation of LNA and down-mixer using 90 nm CMOS process are presented for 60 GHz band WPAN receiver. In order to extract characteristics of the transistor used to design each elements under the optimum bias conditions, the S-parameter of the manufactured cascode topology was measured and the effect of the RF pad was removed. Measured results of 3-stages cascode type LNA the gain of 25 dB and noise figure of 7 dB. Balanced type down-mixer with a balun at LO input port shows the conversion gain of 12.5 dB within IF frequency($8.5{\sim}11.5\;GHz$) and input PldB of -7 dBm. The size and power consumption of LNA and down-mixer are $0.8{\times}0.6\;mm^2$, 43 mW and $0.85{\times}0.85\;mm^2$, 1.2 mW, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.771-776
• /
• 2020

In this study, the flexural/shear behavior characteristics of perfobond FRP-concrete composite beams using an FRP plate with perforated webs as formwork and reinforcement are analyzed through an analytical method. Compared with the existing experimental results, we have proved its usefulness and use it in future practice. When the nonlinearity is very large in this case, the nonlinear finite element analysis by an explicit method will be effective. The concrete damage plasticity (CDP) model adopted in this study is considered to be able to adequately simulate the nonlinear behavior of concrete, and the determination of several variable factors required in the model is compared with the experimental results and values used in the study. This recommendation will require review and adjustment for more diverse cases. The effect of the perfobond of the composite beam with perforated web is considered to be somewhat effective in terms of securing the initial stiffness, but in the case of the apex, it is considered that the cross-sectional loss and the effect of improving the bonding force should be properly arranged. The contact problem, such as slipping of the FRP plate and concrete, is considered to be one of the reasons that the initial stiffness is slightly larger than the test result, and the slightly difference from the experimental results is attributed to the separation problem between concrete and FRP after the peak.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.1020-1030
• /
• 2016

This paper propose an improving relay node selection method for node-to-node connectivity. This concern with the mobility and analysis of deployed for masking operation using highest connectivity node. The major of Delay Tolerant Network (DTN) routing protocols make use of simple forwarding approach to transmit the message depend on the node's mobility. In this cases, the selection of the irrelevant mobile node induced the delay and packet delivery loss caused by limiting buffer size and computational power of node. Also the proposed algorithm provides the node connectivity considering the mobility and direction select the highest connectivity node from neighbor node using masking operation. From the simulation results, the proposed algorithm compared the packet delivery ratio with PROPHET and Epidemic. The proposed Enhanced Prediction-based Context-awareness Matrix(EPCM) algorithm shows an advantage packet delivery ratio even with selecting relay node according to mobility and direction.

• Journal of KIISE:Databases
• /
• v.33 no.3
• /
• pp.299-309
• /
• 2006

Due to the rapid development in mobile communication technologies, the usage of mobile devices such as cell phone or PDA becomes increasingly popular. As different devices require different applications, various new services are being developed to satisfy the needs. One of the popular services under heavy demand is the Location-based Service (LBS) that exploits the spatial information of moving objects per temporal changes. In order to support LBS efficiently, it is necessary to be able to index and query well a large amount of spatio-temporal information of moving objects. Therefore, in this paper, we investigate how such location information of moving objects can be efficiently stored and indexed. In particular, we propose a novel location encoding method based on hierarchical administrative district information. Our proposal is different from conventional approaches where moving objects are often expressed as geometric points in two dimensional space, (x,y). Instead, in ours, moving objects are encoded as one dimensional points by both administrative district as well as road information. Our method is especially useful for monitoring traffic situation or tracing location of moving objects through approximate spatial queries.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.20-26
• /
• 2018

This study was conducted to develop a device for measuring the air flow by space variation through monitoring program, which acquires data by each point from each environmental sensor located in the greenhouse. The distribution of environmental factors(air temperature, humidity, wind speed, etc.) in the greenhouse is arranged at 12 points according to the spatial variation and a large number of measurement points (36 points in total) on the X, Y and Z axes were selected. Considering data loss and various greenhouse conditions, a bit rate was at 125kbit/s at low speed, so that the number of sensors can be expanded to 90 within greenhouse with dimensions of 100m by 100m. Those system programmed using MATLAB and LabVIEW was conducted to measure distributions of the air flow along the greenhouse in real time. It was also visualized interpolated the spatial distribution in the greenhouse. In order to verify the accuracy of CFD modeling and to improve the accuracy, it will compare the environmental variation such as air temperature, humidity, wind speed and $CO_2$ concentration in the greenhouse.