• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.161-164
• /
• 1998

광대역 주파수 상에서 외부로부터 입사하는 전자파를 산란시키지 않고 유전체 내부에서 흡수시키기 위해 유전체를 다층으로 배열하여 전파 흡수체를 최적 설계하고자 한다. 수직 및 여러 각도로 전파가 입사하는 경우 각 유전층의 두께, 유전 상수, 손실 탄젠트 등의 설계변수를 유전자 앨거리즘을 이용하여 최적화한다. 다극함수에서의 부분 초기화 유전자 앨거리즘의 성능 향상을 위해 부분 초기화율, 부분 초기화 시점, 스케일 인자의 변화에 따른 성능을 비교, 개선하여 흡수체 설계에 적용하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.226-229
• /
• 2007

본 논문에서는 사각형 링을 갖는 UHF대 RFID 리더기용 소형 원편파 패치 안테나를 설계 제작하였다. 정사각형의 패치 안테나를 설계하고, 원편파를 위한 Truncated 패치 안테나를 설계한 후, 소형화를 위해 사각형의 링을 갖는 Truncated 패치 안테나를 설계하였다. 주파수 대역은 UHF대역인 902928MHz이며, 설계를 위하여 HFSS simulation올 사용하였다. 비유전율 4.3, 두께 1.6mm, 손실탄젠트 =0.019의 epoxy 기판을 사용하여 실현하였다. VSWR, 방사이득, RHCP, LHCP의 큰 변화없이 사각형의 링을 이용하여 기본 Truncated 안테나보다 6.37% 소형화시켰다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.187-190
• /
• 1998

In this paper a probe for the' measurement of dielectric properties of dielectric sheet materials is designed and implemented as a coaxial air line type. Using the broadband impedance method with this measurement probe the dielectric constant and loss tangent of the glass-epoxy and teflon are determined in the frequency range of 0.1 - l.O[GHz] with the temperature variation from $25[^{\circ}C]$ up to $65[^{\circ}C]$. A measured relative dielectric constant of the glass-epoxy is 4.42 and a loss tangents is 0.019 relatively, and the relative dielectric constants of teflon is 2.17 and a loss tangents is 0.002 relatively

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.10
• /
• pp.773-777
• /
• 1998

This paper presents the results of measured permittivity of PCB sheet material in the frequency range of 0.1 ~ 2[㎓] and temperature range of 25~ 85[>$^{\circ}C$]. Microstrip lines with different physical length are implemented to measure the attenuation and phase shift of the signals through these lines. The loss factor of glass-epoxy and teflon could by calculated with the measured dielectric constant and the attenuation. From the experiment, the glass-epoxy was more influenced by temperature and frequency than teflon. The average dielectric constants of glass-epoxy and teflon within the measured frequency range are 4.48 and 2.18, respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.402-411
• /
• 2000

This study investigates the method to measure the viscoelastic properties of asphalt cement, one of the viscoelastic materials, using the ultrasound. The wave speed and attenuation were measured from $-20^{\circ}C$ to $60^{\circ}C$ at the frequency of 2.25MHz. Then, the storage and loss longitudinal moduli, loss tangent storage and loss longitudinal compliances were found depending on the temperatures based on the linear viscoelastic theory. Stress relaxation, creep, and viscosity were predicted using Maxwell and Voigt-Kelvin viscoelastic models. The validity of superposition principle and shift factor were verified by comparing the present results to the data reported in the literatures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.65-67
• /
• 2015

In this paper, small WLAN antenna was designed and investigated. Proposed antenna was configured for microstrip patch antenna ($29mm{\times}29mm$) that was mounted on RF4 dielectric substrate (relative permittivity 4.4, thick 1.6mm, tangent loss 0.025) with $45mm{\times}45mm$. In order to obtain a wide band characteristic, the cutting process was 3.2mm diagonal corners of the patch antenna located on the top of the substrate. Antenna feeding position for 50 ohm impedance matching was decided to be 5.1mm at the central axis in the horizontal direction. As a result, frequency bandwidth satisfying the condition of VSWR<2dB was 2.365-2.45GHz (85MHz, 3.53%) for considering WLAN.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.77-78
• /
• 2016

In this paper, small WLAN antenna was designed and investigated. Proposed antenna was configured for meandered type patch antenna ($20mm{\times}20mm$) that was mounted on RF4 dielectric substrate (relative permittivity 4.4, thick 1.6mm, tangent loss 0.025) size of $20mm{\times}60mm$. Antenna parameters was calculated by using the OpenFDTD simulator. As a result, frequency bandwidth satisfying the condition of VSWR(2:1) was 1.82-3.05GHz (1.23GHz, 44.6%) for considering WLAN.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.453-456
• /
• 2009

In this paper, a Microstrip antenna for wireless LAN is designed in HyperLAN 5GHz. The IEEE 802.11a have allocated HyperLAN band. We proposed CPW-fed antenna structure for compact antenna. This structure shows that a ground plane and a patch plane are existed at one layer. The proposed antenna is designed on FR-4 substrate with a relative dielectric constant 4.3, thickness of 1.5mm and tangent loss 0.02. The designed antenna shows that VSWR is below 2 and has good return loss below -10dB over the 5.725~5.825GHz bandwidth with HyperLAN.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.642-648
• /
• 2000

We introduce a new application of the genetic algorithm for design of the coaxial fed circularly polarized rectangular microstrip antenna. The GA shows excellent results for the design of the microstrip antenna which have a very complex objective function including the input impedance, the effective loss tangent and the axial ratio. The objective function is derived from the cavity model, and the size and the feeding point are optimized by the genetic algorithm. The experimental results show good agreement with the simulated results.

• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.433-443
• /
• 2004

The membranes of the blends of chitosan and polycaprolactarn (PA6) were prepared in formic acid. FT-IR data revealed that hydrogen bonding between amide and hydroxyl groups of chitosan and PA6, respectively, was formed. Thermogravimetric analysis demonstrated that the blend samples contain water. DMA results showed that the dissipation of water in the samples significantly reduced the storage modulus (E'). The mechanical loss tangent (tan $\delta$) data of the blend samples showed the $\beta$d loss peak around $0^{\circ}C$. The blend samples were completely dried in a vacuum and then exposed to high moisture to absorb water which would cause, so called, w-bridges between the molecules. The E' data of these regained samples increased abnormally and additional loss peak appeared on the shoulder of the peak around $50^{\circ}C$. Under dry condition, the samples with a blend ratio of 40/60 for chitosan/PA6 displayed a better miscibility between two components.